Quote:
Originally Posted by SilverSurfer
Interested in your views and what do you have.
Thinking of speccing up a TD05-18G and wondering whether to go for a 7cm or 8cm exhaust housing and also whether to go for a 12 or 9 blade turbine wheel.
The housing makes no difference to price, but the turbine is more expensive for the 9 blade option.
The 7cm spools better but may suffer surge, the 8cm is a little laggier but will give more power.
I assume a 9 blade spools quicker as less mass and more aerodynamic design.
|
Not sure what The harvey 20g that I had was spec wise, but I know that the exhaust housing wasn't really large enough for the compressor side causing potential surge issues when uprated intake pipe fitted that you are aware of.,
I'm sure the 18g was much less prone to this though.. I would go with the larger 8cm exhaust housing and the best billet wheel you can get.. if your doing it with that turbo you might as well make the best unit possible, less prone to surge most possible power etc, from my understanding you can make a solid 380bhp from one with all the relevant supporting mods.