View Single Post
  #113  
Old 07-02-2019, 05:50 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Then today I carefully drove up to Surrey Rolling Road in Farnborough for Duncan to have a play.

After 5 mins or so it was clear the car was losing boost, on investigation Duncan and Charlie found the intercooler and filter box clamps all loose, every single one of them! It's rare that the car comes out of SMD in this state so not sure whether to ignore it or not!

After the clamps were replaced and/or tightened, Duncan set about the tuning and power runs.

Really happy with the outcome, a picture paints a thousand words so here you go:




And after a few final tweaks:




It made 287.1 BHP and 360 lb ft of torque!

Sooo much more fun to drive now, pulls amazingly through the rev range.


And on the way home, treated myself to a V10 STi TMIC... fins are pretty good, needs a good clean but should come up nicely.




__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote