01-05-2020, 11:03 PM
|
|
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
|
|
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
|
|
Quote:
Originally Posted by viper1982
Going back on this same thread. I saw this. will you have the .bin of that ecu to facilitate me?
ECUTEK TEK2 : 15.96psi, dropping to 11.47psi at redline
This was ECUTEK's upgrade that was good for 260BHP with a Cat or 270-280BHP with decat. It pushed the TD04 Turbo to it's limit.
Boost runs a similar profile to the Ae801 but with higher limits
Fuel is a touch leaner at the same load levels than an Ae801, but richer if it hits the higher load values induced by the additional boost
Timing is adjusted (retarded slightly) due to the additional load/boost achieved
|
Sorry no. I only have an html extract showing key maps that I obtained from a ECUTEK beta tester many years ago.
|