[viper1982]

Finally thanks to some command lines that I read last night in a Romraider forum, which if you add to the logger.xml (of the ROMRAIDER) this is capable of connecting to the subaru ECU MY99 & MY00. It has been a while since I tried to do it with Romraider already which seems to be one of the few that admits to reading the IAM. Finally it was possible.
After reading the IAM to my vehicle, this frame was worth 16 (The ECU was in normal operation weeks ago, therefore I assume that I had "learned" everything necessary)
Then I did an ECU RESET to see the behavior of the IAM and it automatically drops to 8.
I assume from what you read out there that this value as the ECU "learns" will go up again if the forward and detonation conditions are okay, correct? is that true right? Ideally I understand that it is 16. Condition which is all good and the ecu uses the maximum multiplier. Scott you who have it very studied you can correct me if this is so effectively.
If anyone is interested in the .XML file edited for the Romraider Logger so that I can see the AE800 / 801/802 ECUs, let me know and see if I send it by email, since here I don't know if it allows me to upload the file. I will try anyway.