Time for the next stage!
Had a tidy up under the engine bay, sorted out the AOS so it feeds off the heads and the crank breather, fitted the oil catch can which I will shortly actually connect to intercept the PCV breather so the system will be fully sorted but retain the PCV which I've read is needed to create a flow and reduce condensation in the block. Removed the fuel breather/purge valve system to tidy up further.
Next steps are to get the intake air temp sensor fitted, fit the new fuel rails and fpr and sort the gearbox! The Orcacri rear spoiler with carbon (3M) rear blade should also go on in the next few weeks. Plus the front grilles will be sprayed Black and the cold air intake fitted to the front fog.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|