Today wasn't a great day to bring closure to the project.
For some reason i wasn't holding boost properly and only achieved just under 1.7bar peak and dropped off to 1.6 post 5k.
It pulls really hard but the power tails right off when the boost drops which is probably why it feels mid 400's when it comes on boost and its pulling but the figures were not showing at the top end as it lost boost.
Charlie said he can feel it pulling hard on the rollers when the boost comes in and the first run it started jumping the rollers so we had to strap it down harder!
Only made 408.6bhp and 390ft/lb, and we know it can do alot more than that.
Possibly BCS, possibly MAP sensor, possibly Actuator? Will be investigating to see what can be done.
Fueling seemed a bit rich but the Wideband control is on the way so will worry about fuelling after that.
Anyway a few pics and a vid of the day as it was...
