IIRC your running a UK 97/98 you need to move a wire on the connector for the fuel pump and swap cam and crank.
Move Fuel Pump wire from Pin 17 to 7 on Connector B137
SwapCam and Crank signal wires B136 Pins 8 and 10
Below link shows connections and also has the details of the swaps in the bottom corner i.e the * items.
Your bascially swapping from an ECU with an Immobiliser (the UK one) to an ECU without one (the Apexi).
http://dspace.dial.pipex.com/bob_raw...ts/MY97ecu.pdf