18-04-2020, 06:53 AM
|
 |
Moderator (formerly known as Bluebugeye!)
|
|
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
|
|
Was thinking of powder coat but knowing how susceptible it is to chipping compared to proper chassis paints plus the benefit of being able to do it at hone I thought I’d go the DIY route. I can get new backing plates for £30 a pair but on all honesty will probably just leave them off as they are only for the 315mm standard brakes rather that the 330mm Brembos I have fitted anyway.
I will look at the design of the STI backing plates and see if they can be fitted but I don’t really see the need to re-fit them, unless they serve a purpose I’m not aware of other than to trap stones!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|