Quote:
Originally Posted by Red Baron
How did it go on Thursday Dave, all good and happy with the results I hope.
|
Happy ye
Didn't get time to dyno due to 1 or 2 unforeseen problems such as the oil cooler core leaking on a weld!!!
Think automotive agreed to replace, but buying one from spectrum hoses that where only 15mins down the road was a much better option! After mapping was done I rushed home as it was Fathers birthday, and 72nd members meeting the next day! Got in at 9.30pm Father and Handbrake had already drunk 3 bottles of wine!)
The car goes very well
Thermal gaskets fitted, injectors, oil cooler etc all working well, looking forward to stretching its legs on Saturday!
I put 3 or 4 heat cycles through a set of 888s! so should be good fun... .if it stays dry!
I wouldn't like to guess at power, 75% injector duty at 3bar fuel pressure injectors are flowing at 700cc.. If anyone can do a rough guestimate from that feel free! It took quite a few more degrees of timing at the top with the FMIC fitted
