We are looking for the same thing, I am trying to find ECU definitions that are more or less similar to see if I find the "easy" way to adapt the addresses. But I am still there seeing how it is and how it can be done.
Can you tell me if the scale of "LOAD" is expressed in "MAF voltage" only that it is in another unit where for example 46.00 would actually be 4.6 volt?
I am trying to better understand how the load represents since I have seen that some tables represent them in G / s and others in G / rev, which is really confusing. And it seems more logical and simple to measure it in MAF Voltage.
I see that you have Winols installed, I was investigating and adding the addresses that you gave me of the AE8xx ecu. Very good and complete software. But anyway the ECUedit is being more useful to me to be able to compare the generated LOGS with the tables in real time on the pc.
Last edited by viper1982; 11-04-2020 at 10:23 PM.
|