|
|
#1
10-11-2010, 07:51 PM
|
|||
|
|||
Cone filters!!!!!
Wat make and where can I get a cone filter for a classic 97 turbo?? Are they easy to fit?? Also a decay in themid section would I hsve to remap. Or can i just fit one ?? cheers
|
|
#2
10-11-2010, 10:58 PM
|
||||
|
||||
|
When i posted a similar thread i was told not to bother and spend my money on a green cotten panel filter.I have read a few threads where cone filters can cause problems but I am sure someone else with more knowledge will post soon
|
|
#3
11-11-2010, 06:46 AM
|
||||
|
||||
|
Map will be needed for decat - also don't bother with an induction kit unless going over 400BHP.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|
|
#4
11-11-2010, 08:42 AM
|
|||
|
|||
|
on a classic car (generally speaking) its unlikely you will have issues with a de-cat, and none at all if its simply the centre section.........
FYI the only classic cars that had a centre cat are the UK spec, all others simply had a silencer box that does look similiar externally as for the cone filter, then all it adds to a std car is a little noise..........the std air box is actually very efficient and simply fitting the likes of a K&N panel will suffice
__________________
 ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!!
|
|
#6
14-11-2010, 08:06 PM
|
||||
|
||||
|
Standard airbox on a classic with a good quality filter such as Green Performance or K&N etc...are good for about 320BHP.
I ran one of these for years at over 315BHP. I then swapped to an Apexi Induction, and with a slight map tweak made another 15-20BHP and about 10lb/ft torque. But the map was adjusted to suite.
|
|
#7
15-11-2010, 01:16 PM
|
|||
|
|||
|
Cheers for the info guys. Much appreciative. I primarily wanted a cone filter to do away with a bov valve as u can hear the whoosh sound just as well .
|
|
#8
15-11-2010, 01:22 PM
|
|||
|
|||
|
Where can
 I get a decat pipe?? Also a turbo smart 3 gauge pod
|
|
#9
15-11-2010, 03:01 PM
|
||||
|
||||
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
