#1
|
||||
|
||||
04 WRX rear brake pad change
Excuse the simple question, but should the brake pads not just pull out once I have got to the stage shown in the attached photo???
Last edited by E1bert; 27-09-2014 at 04:27 PM. |
#2
|
||||
|
||||
Pretty much yeah! You may need to force the pistons in a little to give the pads enough room to get past any possible lips on the disks and wear on the pads. One problem I have had in the past is a build up of break dust and corrosion on the calliper holding the pads in place, between the top and bottom of the pads and calliper, took me 2.5 hours on a cold winters night to remove one front pad on my Sti last year! I see there are two metal shims top and bottom between the calliper and pads, do they slide out and loosen the grip on the pads?
|
#3
|
|||
|
|||
the top and bottom pad guides are clipped in place and only move once the pads are removed.......
as above push the pistons back slightly and they should pull out
__________________
ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!! |
#4
|
||||
|
||||
They'll move with some force I've ended up prising them out with a screwdriver through the pin holes before!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|