MY99 UK Apexi ECU fitting

[RobEvo5]

Just checking is it pins 5 and 6 on plug B136 that just need swapping to get an Apexi ECU running ?.

Also can the pins/wires be easily moved without cutting wires etc. ? If so is there a knack to moving the pins.

Thanks

[Scott.T]

Yes correct pins. A red and a white wire iirc. I use bullet connectors so easy to swap when messing with other Ecu. You can release the pins with a large paper clip or small screwdriver tho.

[RobEvo5]

Originally Posted by SilverSurfer

Yes correct pins. A red and a white wire iirc. I use bullet connectors so easy to swap when messing with other Ecu. You can release the pins with a large paper clip or small screwdriver tho.

Thanks mate - I just want to check it works for now so can check this out myself now.

Just need to sort the 3 port now, but think I have that covered courtesy of a pic showing which pipe goes where from snet.