![]() |
|
General Car / Scooby Chat General chat, car related. Threads posted in here may well be re-directed to a more relevant home. |
![]() |
|
Thread Tools |
#1
|
|||
|
|||
![]()
£300 ~ I have been quoted to remove one broken bolt from my exhaust manifold, apparently it will entail a minimum of 2 hours work to remove the headers and get at the offending sheered off bolt.
Does this sound about right? I'd have thought that with the car up on a lift and all the pro kit it would take about an hour tops? Back story: My car is an Impreza GL (non turbo) 2 years or more ago when my borla replica unequal headers were fitted a stud / bolt was seized and it got snapped in the process of trying to free the old equal headers. I believe the original gasket was reused with lashings of gasket paste for good measure. Last week for the first time in about 9 months I started the car up, and found it to now be blowing, the place i took it too today said yes there is one broken bolt, and another missing one. |
#2
|
||||
|
||||
![]()
That's a rip off mate.
Bring it round here and I will do it for two hundred & eighty five ![]() £ 150.00 tops. |
#3
|
|||
|
|||
![]()
Thing is, Hi-Q and RSR don't wanna know... I think i need somewhere local as driving it too far is risky to the engine? (and v embarrassing noise wise)
|
#4
|
||||
|
||||
![]()
Time wise, i thonk 2hrs sounds about right (I'm about to undertake the same thing in a few weeks as ive got a snapped stud).
But, £300 is way over the top. if you are at all mechanicaly minded, you could buy a stud extractor kit, and a drill, a drill bit, a replacememt stud and a pair of gaskets for way less than £300 and do it yourself ! |
#5
|
|||
|
|||
![]()
mechanically minded, yes, physically capable nope. I'm a wheelchair user mate - they don't fit too well under cars without the need of an air ambulance afterwards lol
|
#6
|
||||
|
||||
![]()
well i'm sure theres someone on here that would do it for far less than £300 for you !
if not, i'm due to do mine in 3 weeks. 2 weeks time n i'm doin coilovers. week after that n i'mn doin SS manifold and replacing a snapped stud. ive already ordered a set of 6 studs and bolts, even though only 1 of mine is snaped and needs replacing (just in case). Once i've done mine, if ive got studs spare (which no doubt I will) i'll quite happily do it for you for free. My house even has a disabled ramp so you can come in n hve a cup of tea with the mrs while your waiting. only thing you will need 2 get is the manifold gaskets & the up pipe one. and i'm only about 20 minuites drive from wallington |
#7
|
||||
|
||||
![]()
oh better check 1st, studs i ordered were for a classic, what year is yours ?
|
#8
|
|||
|
|||
![]()
mine's a 97 mate, a GL on a P reg. Thanks very much for your offer! I shall let you know!
|
#9
|
|||
|
|||
![]()
Can't beat the Scooby community - what a nice thing to read 1st thing on my Saturday morning.
![]() |
#10
|
||||
|
||||
![]()
Andy-m thats a cracking offer,well done mate.
|
#11
|
|||
|
|||
![]()
Andy, I got mine sorted for £110 this week!
PM me your number I have some tips for you mate |
#12
|
||||
|
||||
![]()
glad 2 hear it. & PM sent.
I'm orderin my new shocks tomorrow. next friday will be gettiung the new manifold and attempting to pull the old stud out over the bank holiday weekend |
![]() |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
Thread Tools | |
|