![]() |
#1
|
|||
|
|||
![]()
I decided to upgrade the graphics card in my puter nothing special or new needed so purchased this
![]() Problem is that it wont fit in the hole/slot because of the chuffing red cable thingys on the right of the red slotty thing. ![]() I tried moving the red things down to the next slots but no luck, if it where mechanical no problems but I am out of my depth here any help or hints would be great. |
#2
|
|||
|
|||
![]()
What happened when you moved the sata (red cables) down? Else bend the top one around the bottom of the card?
|
#3
|
||||
|
||||
![]()
You should be able to move the Red Sata cables down to the other sockets although you may have to change the drive boot order in the BIOS afterwards.
__________________
P1 Numero Uno 236/1000 |
#4
|
|||
|
|||
![]()
When I moved the red cables that shall now be known as sata cable the bottom of the card still wouldnt fit, I then googled sata cable and found out that they come in right angled varieties this may be the answer to the problem.
|
#5
|
||||
|
||||
![]() Quote:
Should just work really.....but some boards have a split of standard ports and RAID ports to confuse things. |
#6
|
|||
|
|||
![]()
Cheers for the replies guys will try with new cables tomorrow
|
#7
|
||||
|
||||
![]()
i had same issue, the cable you talk about with the right angle worked for me
|
#8
|
||||
|
||||
![]()
Can add anything but pmsl - Tickled me that
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
|