|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  godspeed 
			
			Godspeed front grooved 294mm discs and kevalar pads Anyone used these?? just got me a set off ebay very cheap with very light use, never herd of them but was in need and for £45 i thought it was a steel!!
		 | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Godspeed know their stuff, don't worry about that.  I'm running his disks f & r but with his 330mm AP kit and ferodo pads.
		 
				__________________ 2005 Spec B 6MT - KiDO tuned (~270Bhp) Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter | 
| 
			 
			#3  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Good stuff!! was in need as my discs n pads are beyond gone and for the price i fort it was a steal!!! cheers!
		 | 
| 
			 
			#4  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			I have fitted 2 sets - discs and pads - to my Hawk and they have both been fine. Fantastic value and a bit better then oem. J. 
				__________________ Currently very broken Hawkeye WRX   | 
| 
			 
			#5  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			How much did you pay for the rears will be looking to get some ifxim happy with the fronts!
		 | 
| 
			 
			#6  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			I seem to remember getting fronts, rears and kevlar pads all for around £200...
		 
				__________________ Currently very broken Hawkeye WRX   | 
| 
			 
			#7  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Put the god speed discs n pads on and have a big judder!! it vibrates the car savagely they like new so not sure what the fella has done so back to sqaure 1!! not good
		 | 
| 
			 
			#8  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Assume both inside surface of disc and the hub itself were clean, smooth and free from any rust/grit that would stop the disc sitting flush? I used to have Godspeed grooved discs (294mm) on my bugeye using the 4 pots, they didn't warp even with serious track abuse (melted two sets of Bluestuff NDX pads, so a fair bit of heat). | 
| 
			 
			#9  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Yeah defo clean budd i used some sand paper to scratch the serface and to make sure there wasnt any wax still there same for pads, i put plenty of copper grease hub side tripple checked there all good? grooves are rotating clock wise, stange i find it at high speed more even gental braking lower speed seems fine?? just brought some sh ebc dimple n grooved done less than 100 miles hopfully there sort me out its only to get me out of trouble untill the new year so i can star looking at brembos,
		 | 
| 
			 
			#10  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			sounds like they are out of true, a simple brake skim should sort..............
		 
				__________________  ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!! | 
| 
			 
			#11  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Yeah the fella said that they were skimmed under warrenty and neva fitted after? i have some ebc coming so il fit those and have these skimmed and save for spare!! good old ebay!!
		 | 
|  | 
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|  |