turbo time

[mylilscooby]

im looking at turbos to buy and what would you choose?? ive got my eyes on a new TDO6??

[scooby doo]

wouldnt on a 2ltr,
and what power are you looking for?

[mylilscooby]

im not really looking for power gains because it has more then enough as it is just want a strong reliable different make one

[jura11]

If you are looking for reliable turbos,VF30 or VF34,VF35 are pretty reliable.
On other side genuine TD range is pretty reliable(and easy to rebuild),TD05-16G or 18G will be good turbo,if you could stretch your budget SC36 will be good turbo and really spooly turbo as well.


Jura

[mylilscooby]

i have about £800 to spend on a turbo which i was saving for way before it blew but i dont wanna rush anything like i normally do and end up with crap again like i normally do!!! i was looking at a VF34 ball bearing turbo but i no nothing about the importance of things like this lol

[jura11]

Originally Posted by mylilscooby

i have about £800 to spend on a turbo which i was saving for way before it blew but i dont wanna rush anything like i normally do and end up with crap again like i normally do!!! i was looking at a VF34 ball bearing turbo but i no nothing about the importance of things like this lol

SC36 cost similar money like new VF34.If you are find VF34 for good money.


Jura

[mylilscooby]

i found a near on new VF for aboutttt hmmmm i got quoted £599.56 including V.A.T but having my one rebuilt seems like a cheaper option for half that

[mylilscooby]

ive decided to save a little longer and buy the garrett GT35

[jura11]

Originally Posted by mylilscooby

ive decided to save a little longer and buy the garrett GT35

But you will need go rotated and you must have rotated setup,GT35 are only rotated,great turbo i must admit.

Scoobyclinc selling Blouch turbos which i have in my build,which is based on Garrett Ball bearing core(GT30) with billet turbine and are standard location or you can also have look for Lateral Performance MD321 series which are based on same cores Garrett GT30.


Jura

[mylilscooby]

sorry mate that means nothing to me lol

[C. J.]

Tdo5 18g all day on a standard classic engine

[jura11]

Originally Posted by mylilscooby

sorry mate that means nothing to me lol

You will need also 6speed(or PPG),plus mappable ECU like Syvecs,Simtek etc.,forged engine etc. and will be not cheap.

And what means rotated setup(if you want GT35),here is picture,how it looks
Also you will need new downpipe,up pipe headers etc(£700-900) or full set with turbo GT35r from RCM £3899(you are all ready save £800,you will need just £3k...)




Jura

[mylilscooby]

i wish mine was standard and un tampered with would of been a lot easier to maintain last month i had to replace a paddle clutch which when i was told the cost my heart sunk now this bloody turbo and water pump if they didnt sound so nice or drive like perfection when running right i dont think i would bother with them lol

[mylilscooby]

ohhh i get what ya mean i already have simtek ecu etc etc and 6 speed is next on the cards after this bloody turbo because i think 5 gears lets it down a little bit

[jura11]

Originally Posted by mylilscooby

i wish mine was standard and un tampered with would of been a lot easier to maintain last month i had to replace a paddle clutch which when i was told the cost my heart sunk now this bloody turbo and water pump if they didnt sound so nice or drive like perfection when running right i dont think i would bother with them lol

Matey really upgrade what you have like brakes,ARB's,Droplinks,fast road alignment and you have great car.

Modding car is not cheap and at end will end with big bill,and if its worth not sure.

What turbo you have now?

VF34 are good and very spooly turbos,with good ported headers and up pipe will make goo power and also will be good.


Jura

[mylilscooby]

ill have to post what turbo i have on there when i get home but when i had the clutch done last month the guy way impressed with what he see he was telling me that it has ported headers with up-pipe attached to it he said who ever had it before me spent some serious money on it... i have two thick folders from things that have been spent on it even every service from japan to when it was imported here!

[jura11]

Originally Posted by mylilscooby

ohhh i get what ya mean i already have simtek ecu etc etc and 6 speed is next on the cards after this bloody turbo because i think 5 gears lets it down a little bit

Yeah SimTek is good ECU and 6 speed will be good addition.

Really matey,if you are looking for turbo upgade depends how much bhp you want and from this you will see what you can get,Garrett turbos are generally based on Ball bearing cores,which are very reliable,but nothing out there is bullet proof,TD range is based on thrust bearing.


Jura

[jura11]

Sign up on 22b and have look there for turbo

Garrett AET VT272-64 420 bhp turbo for £500


http://bbs.22b.com/cgi-bin/ultimateb...;f=34;t=003102



Jura

[mylilscooby]

your have to take a trundle up to sittingbourne one day your passing and help compile a list of what i have had done lol and what could be done

[jura11]

Originally Posted by mylilscooby

your have to take a trundle up to sittingbourne one day your passing and help compile a list of what i have had done lol and what could be done

If you have any question,please visit your nearest Subaru Specialist,i'm using Neil@Slowboy Racing which is located near Brands Hatch and he will advise to you,what you will need and what not.

If you have any question PM me and if i could i will help you


Jura

[C. J.]

Originally Posted by mylilscooby

ive decided to save a little longer and buy the garrett GT35

Why a 35 and not a 30 ?

[MrsTrishScooby]

Mine had the td05 18g when i got it, that blew but am getting it repaired if its a genuine and not a crap copy, in the meantime have put a tdo4 16g