|
New Members (first thread here please) New members introduce yourself to our existing members here. |
|
Thread Tools |
#1
|
|||
|
|||
wrx 2002 , re map
hi all ,
could some one point me in the right direction to a person who dose re-maping pleas |
#2
|
||||
|
||||
Hi and welcome to the club thats going to be interesting as theres a few mappers down south so a few peeps on here will give you a few names .
__________________
Maintained by Hypertech and Mapped by Andy Forrest 1998 UK Turbo , 1998 Terzo , 1997 JDM Type R the money pit , 2004 black WRX STI Type UK , 2004 blue FSTI |
#3
|
|||
|
|||
ok thanks scotty
i have a 2002 wrx with a 3 inch pipe no cat td05 20 g and will be geting a sti intercooler just wunder wht sort of power i would get out of the car before a RE-map and after |
#4
|
|||
|
|||
Welcome mate
It might help if you include what other supporting mods you have beside the sti inter cooler.... For a 20g turbo you would need injectors and fuel pump upgraded before you start. Once done you should see 380ish depending on quality of turbo. As standard you will probably be at around 220bhp if you mapped with what you have at mo you should see 280ish Hope this helps |
#5
|
|||
|
|||
thanks pj
im looking at just peaking 300 bhp really ,dont wont to go to mad one other thing is my standerd wrx intercooler looks the same as a sti intercooler, im guessing that the sti has more cooling fins than the wrx thanks for your help |
#6
|
|||
|
|||
I think the sti inter cooler has a bigger core...not entirely sure how much bigger it is. If you are looking at peaking at 300 then definitely do not put the 20g turbo on as that is huge. You can sell it to me instead lol....anyway I would just stick with the standard td04 yes it might not quite hit 300 although I know of some that have but it makes a very responsive car on the td04.
|
#7
|
|||
|
|||
the problem is iv got the td05 but havnt run it yet because it needed a biger oil feed pip which i have come threw the post today. so iv got the td05 bolted on the car and just need to put the oil pipe on the car hopfully i can have it running tomorow
|
#8
|
|||
|
|||
Ok mate. Have you upgraded fuel pump and injectors?
|
#9
|
|||
|
|||
i havnt i got told that pump and injectors was ok for about 350 bhp
|
#10
|
|||
|
|||
This is Duncan http://www.racedynamix.co.uk/remap/racedynamix/
Ok....hmm I wouldn't push it that far to be honest to be safe. Are you sure you have a td05-20g or a 16g? If it's the former I think you would be a bit disappointed to be honest as the turbo won't be able to boost properly.... |
#11
|
|||
|
|||
yes im thinking the same , i think i got the td05 out of haste and ignorance really it is 20 g
So im left with do i go the hole hog and get that 380 bhp or there abouts or dwn grade. mmmm well iv got this far with the td05 on the car so i will see wot it feels like from ther |
#12
|
|||
|
|||
Ok mate your call...my opinion is it would be a waste of money because it will be very laggy and in order to reap the full benefits your would need to do the rest of the supporting mods and then pay again for a tweak on the map.also bear in mind that you are on a 5 speed box so depending how you drive it might not last too long at much above 350. Just to put things in perspective when I had a wrx engine in my foz with a vf28 it maxed out the injectors at 330ish and had to be pegged back to 316 for safety. Your call mate just sharing the things I have picked up from others and my own experiences
|
#13
|
|||
|
|||
ok thanks for the advise
so how would you go about it to get 290 bhp in my car im guessing at new intercooler keep my td04 on decent panle filter and 3 ich pipe then remap |
#14
|
|||
|
|||
Just 3" decat and up pipe leave your inter cooler as it is with the td04 and it should make that and yeah panel filter...up-pipe helps it spool up quicker
|
#15
|
|||
|
|||
ok mate thanks very much for the advice i will keep it in mind as my first subaru im not to sure where to start so im glad iv spoken to some one who has been there befor . and can share good nollege
p.s thanks |
#16
|
|||
|
|||
No worries fella happy to help
|
#17
|
||||
|
||||
I had 280 ish from my 2002 with a miltek 3' sports cat system, K&N, 255l pump, prodrive 3 port boost solenoid and std turbo
When I went to an APS Sr40 with sti intercooler I got the car up to 380 ish but the engine let go! I'd sell the 20g on personally and get a decent 18g turbo, the wrx engines are not actually that strong out of the box!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#18
|
||||
|
||||
It's luck of the draw I ran a 20g for 4 years at 409 bhp with a 5 speed in my bugeye and it all survived
__________________
Eat, Sleep, Race , Repeat |
#19
|
||||
|
||||
i would put a vf35 from an sti on it, make sure pink injectors and new uprated fuel pump installed.
if you want to sell 20g i might be interested. Duncan - Racedynamix for mapping or Neil at Slowboy near Brands Hatch. I put a VF43 on my bug wrx, but a bit laggy, 20g probably even worst. i would aim for 300 to 330bhp and be happy as still rapid but gearbox should be ok. |
#20
|
||||
|
||||
My O2 bugeye wrx is at 280bhp with 3" sport cat/downpipe, 2.5" cat back, decat up pipe, panel filter and remap on std turbo
|
#21
|
||||
|
||||
I am running 280ish bhp from my 01 bugeye with a look for more power. As said, 330 bhp is available with a VF30 STI turbo but you will have to do injectors and fuel pump. And clutch. lol
|
#22
|
||||
|
||||
clutch should be ok, but factor in you may have to do and skim/replace flywheel.
__________________
2002 Bugeye WRX Wagon - deceased 1995 555 STi v2 track build 1999 RB5 2003 Blobeye WRX SL Wagon |
#23
|
||||
|
||||
i uprated mine to an Exedy stage one when it was due to be replaced.
What can the standard clutch handle? 350bhp ish?? |
#24
|
||||
|
||||
mine seemed ok on roughly 310 to 330bhp and that was track driven quite hard. depends on age and condition I expect. I do have a completion clutches stage 2 I think it is on a light weight flywheel now, but car is in bits so not used. though is getting pulled back out again to be used in something else shortly.
__________________
2002 Bugeye WRX Wagon - deceased 1995 555 STi v2 track build 1999 RB5 2003 Blobeye WRX SL Wagon |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|