![]() |
#1
|
||||
|
||||
![]()
Hi all,
My engine bay is a disgrace, it seems like it was never cleaned before I bought the car (at 88K miles) and I haven't touched it since. I would be embarrassed to open the bonnet and it probably isn't good for reliability either, so it's about time I pulled my finger out. Given that I don't have a lot of spare time myself, or any experience with detailing, can anyone recommend someone who can get it into a basic clean condition where I will be able to maintain that level with a few hours work every few months? I'm near Sevenoaks/Maidstone. Cheers, Toby
__________________
JDM twinscroll Legacy wagon [previously blob WRX/PPP wagon, killed @ Silverstone Feb 2019] |
#2
|
||||
|
||||
![]()
In all honesty mate you could easily do it yourself
![]() |
#3
|
||||
|
||||
![]()
I use a bit of Autoglym machine cleaner. I normally cover only the air intake and any exposed electrics (the rest gets very wet anyway when driving in heavy rain) spray on and use a brush, a soft one or a small wheel brush to get down in the tight to reach places.
When rinsing make sure you don't blast anything with a pressure washer close up, you just need to use your noodle and rinse it from a distance. Its an easy job really. You can dry up with an old microfiber, dress pipes and black bits with some vinyl care product if you wish but its not necessary.
__________________
Somewhere drinking Coffee Mapped and maintained by FBTuning 07595 493581. |
#4
|
||||
|
||||
![]()
Do what i do lift bonnet have a look at engine bay laugh and close bonnet
![]()
__________________
Maintained by Hypertech and Mapped by Andy Forrest 1998 UK Turbo , 1998 Terzo , 1997 JDM Type R the money pit , 2004 black WRX STI Type UK , 2004 blue FSTI |
#5
|
||||
|
||||
![]()
To the OP,if you decide to give it a go yourself you won't regret it cuz once you see that finishing look you will never want it to look dirty again, especially after all your hard work
![]() |
#6
|
||||
|
||||
![]()
Thanks all, for the encouragement. Now, could any of you convince my wife that it is time well spent?
![]() ![]()
__________________
JDM twinscroll Legacy wagon [previously blob WRX/PPP wagon, killed @ Silverstone Feb 2019] |
#7
|
||||
|
||||
![]()
Just did mine a mo ago took 30mins
![]() Looking clean👍🏻 Sent from my iPhone using Tapatalk
__________________
Somewhere drinking Coffee Mapped and maintained by FBTuning 07595 493581. |
#8
|
||||
|
||||
![]()
I dont need an excuse as the
![]() ![]()
__________________
Maintained by Hypertech and Mapped by Andy Forrest 1998 UK Turbo , 1998 Terzo , 1997 JDM Type R the money pit , 2004 black WRX STI Type UK , 2004 blue FSTI |
#9
|
|||
|
|||
![]()
I have used this stuff - spray it all over and wipe of the residue. Seems to keep things rust free and a bit shiny. Suggested on another forum
https://www.amazon.co.uk/30308-Aeros...303+protectant |
#10
|
||||
|
||||
![]() Quote:
![]() I'm lucky, like Scotty, as I keep both Subarus in the household clean, so Mrs Stig is an advocate and I'm encouraged not resisted. ![]() |
#11
|
||||
|
||||
![]() ![]() That's how my engine used to look after a 30 minute spruce up,it's definitely worth the effort.SJ. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|