Evil Snow White - Page 3

Scott.T · #**201** 03-07-2015, 02:29 PM

Hi Scotty have you got the part number for the side skirt sill fixings. I'm after the under sill white ones that the self tapping bolts screw into.
Don't worry if you haven't I can probably find them in the database.
Cheers

C. J. · #**202** 03-07-2015, 03:26 PM

Quote:

Originally Posted by Scott.T

Hi Scotty have you got the part number for the side skirt sill fixings. I'm after the under sill white ones that the self tapping bolts screw into.
Don't worry if you haven't I can probably find them in the database.
Cheers

I've got a load of those at home

scotty · #**203** 03-07-2015, 06:20 PM

Quote:

Originally Posted by Scott.T

Hi Scotty have you got the part number for the side skirt sill fixings. I'm after the under sill white ones that the self tapping bolts screw into.
Don't worry if you haven't I can probably find them in the database.
Cheers

No the ones I've got are in my part numbers thread and the underneath ones are now like the black bumper clips .

scotty · #**204** 03-07-2015, 07:35 PM

91167AA000 CLIP SIDE SKIRT.
91167AA110 CLIP PIN SIDE SKIRT

These are the ones I've got Scott

scotty · #**205** 06-07-2015, 10:07 PM

Got another part today from these people

scotty · #**206** 28-07-2015, 10:56 PM

Looking at getting this done to my spare inlet manifold

Bytes · #**207** 29-07-2015, 08:22 AM

Mmm, bling

Did you mean to show the invoice address from RCM?

Rdlangy1 · #**208** 29-07-2015, 08:41 AM

loving the manifold!

scotty · #**209** 29-07-2015, 09:04 AM

Quote:

Originally Posted by Bytes

Mmm, bling

Did you mean to show the invoice address from RCM?

Wouldn't worry about that not my address anyway

scotty · #**210** 31-07-2015, 09:32 AM

Really getting board now so gave the wheels a clean lol

Red Baron · #**211** 31-07-2015, 09:47 AM

When's the engine going to be ready?

scotty · #**212** 31-07-2015, 10:44 AM

Quote:

Originally Posted by Red Baron

When's the engine going to be ready?

Well Shane as I start paying for the build at the end of August so hoping it won't be to long but I now Steve is a perfectionist when it comes to engine builds and he is doing a big monster engine build for a customer at the moment so mine will be done after that but I will ordering new hoses during the build and maybe a baffled sump if funds allow .

asperformance · #**213** 01-08-2015, 12:44 PM

as always we can assist with costs no doubt.........

scotty · #**214** 05-08-2015, 12:45 AM

Roll on Saturday when I can finally get this project underway again hopefully so watch this space as it will be going at 100mph

scotty · #**215** 08-08-2015, 08:49 PM

When to Hypertech and put an order in for a set of new Tein type flex A coilovers then popped down to see Steve Whitson to drop of my turbo inlet pipe and noticed a set of uprated APR head bolt kit sitting on my spec c block he is going to order a set of uprated cosworth head gaskets and the car will be ready in September ready for collection then back to Hypertech to fit new coilovers and fresh MOT .

scotty · #**216** 13-08-2015, 07:57 PM

A little update Steve will be removing old engine out very soon so while we were talking on the dog and bone ask him to price me up parallel fuel lines , FPR and fuel rails in black and got a phone call from Duncan at Hypertech to say Tein don't make Type Flex A coilovers for classic yet so ordered Type Flex which are EDFC compatible so they should be arriving with him in the next few days .

seventune · #**217** 14-08-2015, 08:58 AM

We like new shiney parts

NL03Scooby · #**218** 14-08-2015, 12:32 PM

Any chance of getting some photos of these new bits, we all love to see a load of photos

scotty · #**219** 14-08-2015, 07:17 PM

No chance of getting pictures as the coilovers are getting delivered to the garage so when they arrive I will jump up and get some pics for you .

scotty · #**220** 16-08-2015, 09:32 PM

Well ive bought these today just waiting for them to arrive

Rdlangy1 · #**221** 16-08-2015, 10:24 PM

Cool

scotty · #**222** 18-08-2015, 10:10 AM

Well ive looking at this for the last few days and i just dont know what to do

C. J. · #**223** 18-08-2015, 10:21 AM

Let us know if you decide not to . Personally I don't like them on road cars 😉

scotty · #**224** 18-08-2015, 11:20 AM

Well they have finally arrived sitting at hypertech waiting for the car to come in

scotty · #**225** 18-08-2015, 11:25 AM

Quote:

Originally Posted by C. J.

Let us know if you decide not to . Personally I don't like them on road cars 😉

Well it would mean a drive to london if i do want it unless some else wanted it lol

C. J. · #**226** 18-08-2015, 11:28 AM

PM us details and price 😉

scotty · #**227** 19-08-2015, 07:18 PM

Another few bits wrapped ready to be sent off for some treatment

scotty · #**228** 27-08-2015, 10:10 PM

Well went down to sw motorsport to fit my revos ready for the car to be collected in a few weeks and couldnt resist a photo

Steve_PPP · #**229** 27-08-2015, 10:17 PM

Just a few scoobs there

Poor blue blob

scotty · #**230** 28-08-2015, 11:21 AM

Quote:

Originally Posted by Steve_PPP

Just a few scoobs there

Poor blue blob

I know i was tempted to look under the covers as they belong to steve and they are all subarus might ask when the next time if i can have a look

NL03Scooby · #**231** 28-08-2015, 05:08 PM

Just love a room full of scoobs and scoob parts, be an Aladdin's cave of parts and tinkering!

scotty · #**232** 09-09-2015, 06:58 PM

Quote:

Originally Posted by NL03Scooby

Just love a room full of scoobs and scoob parts, be an Aladdin's cave of parts and tinkering!

I know might ask if he would sell the white classic bumper lol and engine should be out mid next week going by the state of my discs maybe time to think about replacing them for some decent ones via Alyn when funds allow lol .

NL03Scooby · #**233** 09-09-2015, 07:02 PM

Quote:

Originally Posted by scotty

I know might ask if he would sell the white classic bumper lol and engine should be out mid next week going by the state of my discs maybe time to think about replacing them for some decent ones via Alyn when funds allow lol .

Well to have the Brembos so a good set of disks and pads should go hand in hand with your engine build!

scotty · #**234** 09-09-2015, 09:59 PM

Quote:

Originally Posted by NL03Scooby

Well to have the Brembos so a good set of disks and pads should go hand in hand with your engine build!

Thank god i know what discs and pads i want to get lol

Rdlangy1 · #**235** 10-09-2015, 07:01 AM

looks an amazing place

scotty · #**236** 10-09-2015, 08:26 AM

Quote:

Originally Posted by Rdlangy1

looks an amazing place

Haha it was a hard place to find when i first went there for my first visit lol

Hongkongfooi · #**237** 12-09-2015, 11:09 AM

Liking the lotus esprit in the background

scotty · #**238** 14-09-2015, 03:23 PM

Quote:

Originally Posted by Hongkongfooi

Liking the lotus esprit in the background

Its a very nice one too Tim .

scotty · #**239** 14-09-2015, 03:26 PM

Steve just told me my engine oil was cooked and has stunk out his workshop

Rdlangy1 · #**240** 14-09-2015, 03:33 PM

lovely smell that -

- not ! ha ha

Steve_PPP · #**241** 14-09-2015, 03:52 PM

Quote:

Originally Posted by scotty

Steve just told me my engine oil was cooked and has stunk out his workshop

We knew that on the side of the autobahn

Hope the build is coming along well

scotty · #**242** 14-09-2015, 04:27 PM

Quote:

Originally Posted by Steve_PPP

We knew that on the side of the autobahn

Hope the build is coming along well

Well she hopefully be ready in 2 weeks time with a fresh years MOT so the fun can begin again and get the new coilovers fitted

scotty · #**243** 14-09-2015, 08:46 PM

Just found this little photo the wife took of what speed in mph I was doing when the engine **** itself

alfa male · #**244** 14-09-2015, 09:13 PM

Will never forget the 5 miles or so we were trying to get you to pull over with the fluid pissing out!!
Not looking at the speedo, more looking at the revs!!!
Have you got a 6 speed?

Granby · #**245** 14-09-2015, 09:16 PM

No wonder it s**t itself as it was poorly before & 7K with hardly any air going to the intercooler wasn't gonna help lol

Red Baron · #**246** 14-09-2015, 09:18 PM

Type R gearing and a top mount intercooler, the poor old girl didn't stand a chance, don't think I went over 110 on the Autobahn for that very reason.

She'll be back bigger and better in a few weeks.

scotty · #**247** 14-09-2015, 09:19 PM

Quote:

Originally Posted by alfa male

Will never forget the 5 miles or so we were trying to get you to pull over with the fluid pissing out!!
Not looking at the speedo, more looking at the revs!!!
Have you got a 6 speed?

LOL still on 5speed dccd at the moment .

scotty · #**248** 14-09-2015, 09:22 PM

Quote:

Originally Posted by Granby

No wonder it s**t itself as it was poorly before & 7K with hardly any air going to the intercooler wasn't gonna help lol

I know going FMIC this time hope I can get it all done before the next trip or I will defo be driving like miss daisy

scotty · #**249** 14-09-2015, 09:24 PM

Quote:

Originally Posted by Red Baron

Type R gearing and a top mount intercooler, the poor old girl didn't stand a chance, don't think I went over 110 on the Autobahn for that very reason.

She'll be back bigger and better in a few weeks.

Nothing wrong with dccd Shane just need a extra gear

C. J. · #**250** 14-09-2015, 09:30 PM

7000rpm for 5miles on any subaru 4 pot boxer is asking for trouble!

scotty · #**251** 17-09-2015, 01:48 PM

Well a wee trip down to steve today and something is missing

Heads have been stripped off old block and getting a bath all my cams are still good to use thank good . Steve also said a head bolt was loose compared to the rest and damaged 3 con rods

Rdlangy1 · #**252** 17-09-2015, 02:12 PM

ouch! Glad its all getting sorted though...

scotty · #**253** 18-09-2015, 10:48 AM

Quote:

Originally Posted by Rdlangy1

ouch! Glad its all getting sorted though...

Cheers Ryan just got told yesterday what needs done else where on the car offing list is getting bigger

but knew it was coming

1. New discs and pads allround
2. New steering rack gaiters
3. New front cv boot gaiters
4. New centre pipe as got a hole in it from where we went to park in the multistorie car park in germany we all know what one im talking about

Also find out its a 3" from turbo back but going to drop to 2.5 i think .

Steve_PPP · #**254** 18-09-2015, 10:57 AM

Quote:

Originally Posted by scotty

4. New centre pipe as got a hole in it from where we went to park in the multistorie car park in germany we all know what one im talking about

Might do

scotty · #**255** 18-09-2015, 11:03 AM

That is a nice photo worth the scrapeing

Granby · #**256** 18-09-2015, 10:06 PM

That carpark was a bit tight for the big old Vauxhall

Mortster · #**257** 18-09-2015, 10:30 PM

Steam clean the engine bay while its empty? You wont get another chance unless you fry another engine....

scotty · #**258** 18-09-2015, 10:53 PM

Quote:

Originally Posted by Mortster

Steam clean the engine bay while its empty? You wont get another chance unless you fry another engine....

Oft thats to much work for me might do it when it goes back in for future build

Steve_PPP · #**259** 19-09-2015, 09:56 AM

Quote:

Originally Posted by Mortster

Steam clean the engine bay while its empty? You wont get another chance unless you fry another engine....

This, will look great when the new engine goes back in if the bay is nice and shiny white

scotty · #**260** 19-09-2015, 04:02 PM

I might get down to clean it if i can get away from decorating the house lol .

scotty · #**261** 23-09-2015, 11:15 AM

Ooo heads are back from getting skimmed they were badly warped but all good now , valves all cleaned new seals and relapped and seated and block is getting painted graphite grey we are getting there .

NL03Scooby · #**262** 23-09-2015, 05:07 PM

Quote:

Originally Posted by scotty

Ooo heads are back from getting skimmed they were badly warped but all good now , valves all cleaned new seals and relapped and seated and block is getting painted graphite grey we are getting there .

So how long before the car is ready to go? Glad the processes are all going along nicely.

scotty · #**263** 23-09-2015, 05:16 PM

Well heres how the build is coming along

Car be ready next week hopefully with a fresh MOT just in time for it to go away again for more work done on it

scotty · #**264** 23-09-2015, 08:09 PM

Heads are now on starting to look like a engine again .

scotty · #**265** 24-09-2015, 12:10 PM

Well while the car has been away i have been doing alot of searching to find out what make are my spare alloys which are these

And found out they are Rota GRA now i am going to find out the paint code as i want them looking like this eventually

Steve_PPP · #**266** 24-09-2015, 12:28 PM

Those grey wheels actually look like Inovit Tarmacs to me. They have the Inovit style carbon centre caps and the front face of the spokes are slightly wider on the Inovits compared to the Rotas. You can see this in the gold one above - slightly thinner spokes.

scotty · #**267** 24-09-2015, 12:36 PM

Quote:

Originally Posted by Steve_PPP

Those grey wheels actually look like Inovit Tarmacs to me. They have the Inovit style carbon centre caps and the front face of the spokes are slightly wider on the Inovits compared to the Rotas. You can see this in the gold one above - slightly thinner spokes.

Think your right Steve just found this pic

scotty · #**268** 24-09-2015, 02:03 PM

Winter discs and pads have arrived

scotty · #**269** 25-09-2015, 06:02 PM

Bloody car still trying to have the last laugh saying get your wallet oot aye need a new sump and water pump

NL03Scooby · #**270** 25-09-2015, 07:19 PM

Quote:

Originally Posted by scotty

Bloody car still trying to have the last laugh saying get your wallet oot aye need a new sump and water pump

Better cough up then Scotty! Remember, if you own an Impreza, it owns your wallet!

scotty · #**271** 25-09-2015, 07:27 PM

Quote:

Originally Posted by NL03Scooby

Better cough up then Scotty! Remember, if you own an Impreza, it owns your wallet!

Aye know its sorted now steve whitson is ordering them

Rdlangy1 · #**272** 25-09-2015, 10:48 PM

Be worth it when done

scotty · #**273** 25-09-2015, 10:56 PM

Quote:

Originally Posted by Rdlangy1

Be worth it when done

Aye until the fun starts again next year spend spend and more spend

Hongkongfooi · #**274** 26-09-2015, 03:47 PM

Quote:

Originally Posted by NL03Scooby

Better cough up then Scotty! Remember, if you own an Impreza, it owns your wallet!

that's why I changed

scotty · #**275** 26-09-2015, 04:27 PM

Quote:

Originally Posted by Hongkongfooi

that's why I changed

i just cant give her up Tim .

scotty · #**276** 01-10-2015, 03:57 PM

As looking at replacing the centre section just been thinking about replacing my whole system which is a hks system so been looking at this

scotty · #**277** 01-10-2015, 09:34 PM

My new mani is getting there just needs laquered

iPond · #**278** 01-10-2015, 10:51 PM

That's one crazy looking manifold scotty! You doing the other bits to match like you did with the last lot?

scotty · #**279** 02-10-2015, 12:32 AM

Quote:

Originally Posted by iPond

That's one crazy looking manifold scotty! You doing the other bits to match like you did with the last lot?

No this time they are going to be black carbon affect this time so that the inlet mani can stand out bud .

iPond · #**280** 02-10-2015, 01:20 PM

Sounds good, look forward to seeing it when it's done. Shud definitely stand out!

scotty · #**281** 02-10-2015, 08:57 PM

The mani is now finished

Ginola · #**282** 02-10-2015, 11:02 PM

looks bonkers! think the effect will be good in the car with the carbon bits

scotty · #**283** 03-10-2015, 09:27 AM

Quote:

Originally Posted by Ginola

looks bonkers! think the effect will be good in the car with the carbon bits

Cheers Dave only one of a kind just like me no more mods i think this year time to enjoy driving it again for a while lol .

scotty · #**284** 05-10-2015, 10:30 AM

The long wait is over car be ready with a fresh mot at the end of the week woo hoo just in time to for it to go away again

Ginola · #**285** 05-10-2015, 05:00 PM

Quick trip to the ring first!

NL03Scooby · #**286** 05-10-2015, 07:35 PM

Can't wait to see some pics and get your first impressions on the car and driving it again!

scotty · #**287** 05-10-2015, 08:14 PM

Quote:

Originally Posted by Ginola

Quick trip to the ring first!

Maybe if ive got enough dosh

scotty · #**288** 05-10-2015, 08:16 PM

Quote:

Originally Posted by NL03Scooby

Can't wait to see some pics and get your first impressions on the car and driving it again!

Yeah me too i will try and post a little video of her first run in 6 months

scotty · #**289** 05-10-2015, 08:18 PM

Sold my alloys today so that will go towards a new part dont know what yet but something .

scotty · #**290** 08-10-2015, 10:23 AM

Mmm whats going on here im i just couldnt resist been speaking to a fellow owner in newcastle so a road trip next year to collect these brand new and wrapped

scotty · #**291** 10-10-2015, 06:52 PM

More detail pictures of next purchase

scotty · #**292** 26-10-2015, 12:59 AM

2 more sleeps to go until i pick the car up and give her a good

as not had one since June

Rdlangy1 · #**293** 26-10-2015, 09:08 AM

Loving the manifold ! and the pipes look sweet wrapped - be prepared for them to smoke first start up

Hongkongfooi · #**294** 26-10-2015, 05:19 PM

Quote:

Originally Posted by Rdlangy1

Loving the manifold ! and the pipes look sweet wrapped - be prepared for them to smoke first start up

and steam every time it rains or you leave outside

scooby doo · #**295** 26-10-2015, 05:31 PM

Headers look smart

scotty · #**296** 26-10-2015, 07:03 PM

Dont know why youre talking about the headers as in post 290 it says im doing a road trip next year to collect them .

scotty · #**297** 26-10-2015, 07:05 PM

Quote:

Originally Posted by Hongkongfooi

and steam every time it rains or you leave outside

Dont worry its going to be sitting outside in all weather conditions as i dont have garage

scotty · #**298** 27-10-2015, 12:19 PM

She is finaly home god how i have missed driving her

555_Si · #**299** 27-10-2015, 12:32 PM

nice one Scotty. Now lets talk Classics

scotty · #**300** 27-10-2015, 12:42 PM

Cheers Si

Currently Active Users Viewing This Thread: 16 (0 members and 16 guests)