|
|
#1
21-01-2013, 04:24 PM
|
|||
|
|||
clock light
hi my clock illumination doesnt work but clock does can the bulb be replaced? its a uk2000 has clock in cluster
|
|
#2
22-01-2013, 07:26 AM
|
||||
|
||||
|
Not sure on the classics, I guess it's a simple bulb replacement as its the main cluster.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|
|
#3
22-01-2013, 09:26 AM
|
|||
|
|||
|
Yes it can be replaced, just need to take the clocks out which isn't to hard then each little bulb can be accessed. Can't remember if the backing to the actual clocks needs to come off or there are small access holes. Either way its a 20 min job.
__________________
Cooper man!!!!!
|
|
#4
22-01-2013, 01:53 PM
|
|||
|
|||
|
ok cheers will get round to it one day lol
|
|
#5
22-01-2013, 07:24 PM
|
||||
|
||||
|
on a pre-facelift cluster, there is no backing to come off, dunno if it's the same on facelift. if it is though, you just remove the cluster and the bulbs all sit in plastic twist holder things that sit in holes on the back. there will be a load of small ones and a few big ones. the big ones are the illumination for the clocks
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
