South East Scoobies  

Go Back   South East Scoobies > 555 Wagon Squadron > 555 Wagon Squadron's AREA 51

555 Wagon Squadron's AREA 51 Enter at your own risk!!!

Reply
 
Thread Tools
  #1  
Old 27-01-2011, 08:53 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default JDM Bugeye AVCS 4EAT Wagon WRX Project(400-450bhp)

Hi guys
This project started if i brought with my brother this Wagon,i know before will be my project car.
Here is my shopping list which i brought and which will be fitted probably this week or next week(i hope this week)

1. Sparco ProADV Blue-Driver side
2. Sparco EVO Blue -Passenger side
3. OMP Trek -Steering Wheel
4. Works Bell Paddle Shifter F1 (imported from Japan)
5. Samco silicone hoses kit(11 piece kit)
4. Mocal Transmission Oil Cooler
5. Defi Guage Pod with Prosport Premium Gauges(Boost,Oil Temp,Oil Pressure)
6. Rear Seats gotta go out(still undecided)
7. Rear Spats + Custom Diffuser
8. Sparco Harness
9. Launch Control(I want Anti Lag but with this Ecu not possible)
10. PSi3 Data Monitor

Here are pics how its look at this time:

Here are some pics from inside and outside

Seats


Paddle shifter


New bumper


Better pics of seats and seatbelts


Inside look


Engine pics 1


Engine pics 2


At this time current spec has been just this

Hi guys here is my and me brother Subaru Impreza WRX Station Wagon 2002,this car its my pride and joy,after some work has been done(we are today managed on Dyno 275BHP at flywheel),and be done(Paddle shift,new steering wheel,Sparco ProADV bucket seats,uprated droplinks and anti roll bars,TD05-18G,STi Injectors,transmission cooler and better suspension Bilstein or Tein).

Actually this is current spec:

TD04 boosted at 1.3bar(flywheel 275BHP)
Hybrid GT FMIC
LPG conversion with bigger injectors(Dyno Tested 265BHP at flywheel)
HKS Suction Induction Kit
Remap by Slowboy Racing-Kent
Blitz Nur Spec R fully decated with uppipe
Cusco front and rear strutbrace
KsWheel X-Power 18" LightWeight Battle Wheels(powder coated white by Ruislip Tyres) with Kumho Ecsta
GReddy Boost and Volt Gauges
Autometer ProShift Rev Counter
Brembo Front and Rear pads
Drilled and grooved Disc(Next year will be fitted Brembo Calipers)
Vis Racing Carbon Fibre Bonnet
Chargespeed Front Bumper with Carbon Ducts

I know more people don't like the stickers,but we are love....Sorry

Part two:

Car has been second time mapped with VF34 and STi Pink injectors and make healthy 350bhp.....
But later we are discover we have piston ring failure on piston no.3 and are two option OE Rebuild or 2.1 stroker,we are decide on 2.1 stroker with some mods
After some discussion with my brother(i don't have heart sold car,which we are spend lot of money,we have some offers around £5k or £5.5k(one guy want this wagon like present for his girl from Norwich)...,and i'm honest guy which never sell car with problems(i don't have heart telling lie to someone,who buying car),yes i know everyone telling lie,but not me!!!)
And we are learn from garage and our mapper we are running low compression on one pistons(he suspect ringland...),
And we are decide,we are going for 2.1 stroker with AVCS,engine will be build Slowboy Racing(Neil know our car from beginning and have good(excellent) reputation as engine builder from some forums 22b,SIDC,Type R-A.co.uk,SN)

Project will start at friday when car going to Neil@Slowboy Racing for biggest upgrade as follows
2.1 Stroker
New FMIC
New H&S uppipe(ol is probably damaged)
Chagespeed full bodykit with sideskirts(maybe with Chargespeed Wings/fenders or ABW WRC Wings/fenders)
New gauges(old one has been stolen form our car,long history...)4X Shadow Premium with Defi pod
MD321 or GT30(standard location turbo)
K&N Big cone Air Fillter
650cc injectors(Thanks Anger)
FPR
Syvecs ECU(finally ALS)
Tein Super Street
K Sport 330mm or 356mm(if i found somewhere at stock)
ARB and droplinks(CDF courtesy probably or Whiteline kits)



Jura

Thanks for any kind comment
Reply With Quote
  #2  
Old 27-01-2011, 09:01 PM
BIG"E"'s Avatar
BIG"E" BIG"E" is offline
Events / Ring Trip Organiser
 
Join Date: Sep 2008
Location: Hastings
Posts: 8,901
Default

Looking GOOOOOOOOOOOOOOOOOD !!
__________________
Keep it on the black stuff and leave the pit boards alone
Reply With Quote
  #3  
Old 27-01-2011, 09:27 PM
Nige
Guest
 
Posts: n/a
Default

Looks very nice mate. Keep the mods coming,2.1 in a wagon is very different.
Reply With Quote
  #4  
Old 27-01-2011, 09:33 PM
Hongkongfooi's Avatar
Hongkongfooi Hongkongfooi is offline
Platinum Member
 
Join Date: Dec 2008
Location: East Sussex
Posts: 5,783
Default

crikey thats a project! Good choice 2.1......a couple on here have gone/going that route soon
Reply With Quote
  #5  
Old 27-01-2011, 09:57 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Thanks guys,will be updated later of next week.Car going at Friday and i can wait on transformation of my wagon and later of year drive on Nurburgring or Spa....Can wait...





Jura
Reply With Quote
  #6  
Old 27-01-2011, 11:04 PM
Scooby Hoo? Scooby Hoo? is offline
Bronze Member
 
Join Date: Sep 2009
Location: kent
Posts: 154
Default

Hi Jura.
I was at Neil's on Monday just as the body kit was being delivered and it looks very good . I will pop in and keep an interested eye on your project coming together. Hope your brother is well.
Kind regards Hugh. (White RA with blue graphics if you remember me)
Reply With Quote
  #7  
Old 27-01-2011, 11:10 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by Scooby Hoo? View Post
Hi Jura.
I was at Neil's on Monday just as the body kit was being delivered and it looks very good . I will pop in and keep an interested eye on your project coming together. Hope your brother is well.
Kind regards Hugh. (White RA with blue graphics if you remember me)
OMG i know you,how is your car?Everything is all right with your car?First time i've seen clean example of RA..
My brother is now at Lebanon,he is flying for BMI,tomorrow coming home and tomorrow we are going to Neil
Again thanks Hugh,i forgot your name,sorry




Jura
Reply With Quote
  #8  
Old 27-01-2011, 11:22 PM
ralliart didz's Avatar
ralliart didz ralliart didz is offline
Gold Member
 
Join Date: Aug 2009
Location: outside
Posts: 1,812
Default

thats a wicked bug auto u have there jura,i wouldnt mine having ago with that paddle shift set up,did the gearbox need any mods with all that power. jdm got 200 bhp out of my hawkeye sport,which is wot i want from mine but its finding some1 over here that can do mine.
Reply With Quote
  #9  
Old 27-01-2011, 11:26 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by didlo View Post
thats a wicked bug auto u have there jura,i wouldnt mine having ago with that paddle shift set up,did the gearbox need any mods with all that power. jdm got 200 bhp out of my hawkeye sport,which is wot i want from mine but its finding some1 over here that can do mine.
Hi matey its straight forward fitting Works Bell Paddle Shifter,if you have JDM autobox is easier to do.I have at home original Sport Shift Steering wheel....
Mine has do Neil@Slowboy Racing,just ask him about this....



Jura
Reply With Quote
  #10  
Old 27-01-2011, 11:34 PM
ralliart didz's Avatar
ralliart didz ralliart didz is offline
Gold Member
 
Join Date: Aug 2009
Location: outside
Posts: 1,812
Default

Quote:
Originally Posted by jura11 View Post
Hi matey its straight forward fitting Works Bell Paddle Shifter,if you have JDM autobox is easier to do.I have at home original Sport Shift Steering wheel....
Mine has do Neil@Slowboy Racing,just ask him about this....



Jura
thanks jura11,i will see wot he can do,i would be well happy if he could get me 200 bhp,i will get a turbo 4 next car.still toying with getting a evo 7 gt-a ,they have 276 bhp standerd with a couple of mods 350 bhp which would do me
Reply With Quote
  #11  
Old 27-01-2011, 11:41 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by didlo View Post
thanks jura11,i will see wot he can do,i would be well happy if he could get me 200 bhp,i will get a turbo 4 next car.still toying with getting a evo 7 gt-a ,they have 276 bhp standerd with a couple of mods 350 bhp which would do me


My brother toying with EVO as next project car,me too....
But scooby is still mine favorite car due nicest sound of flat flour....
You will see,what you can do.....




Jura
Reply With Quote
  #12  
Old 28-01-2011, 03:20 PM
simba's Avatar
simba simba is offline
Silver Member
 
Join Date: Feb 2010
Location: horam
Posts: 1,451
Default

wow ! that is a interesting project cool
Reply With Quote
  #13  
Old 28-01-2011, 08:10 PM
SUBARMAN's Avatar
SUBARMAN SUBARMAN is offline
Platinum Member
 
Join Date: Sep 2008
Location: East Sussex
Posts: 2,988
Default

Hi Jura

That Wagon looks very smart indeed.Looking forward to more news!!

Keith
__________________
Toyobaru 86 with Cosworth exhaust brakes and supercharger, Cosworth mapping, Eibach lowering springs, OZ alloys, fast road geo and various cosmetics. Great fun!
Reply With Quote
  #14  
Old 28-01-2011, 09:23 PM
Granby's Avatar
Granby Granby is offline
Gold Member
 
Join Date: Sep 2008
Location: London
Posts: 2,331
Default

Makes me want to get another wagon
__________________
Not built for the Twisty's
Reply With Quote
  #15  
Old 28-01-2011, 10:54 PM
Scooby Hoo? Scooby Hoo? is offline
Bronze Member
 
Join Date: Sep 2009
Location: kent
Posts: 154
Default

Hi Jura it was good to catch up with you and your brother today.

SC460 ?
Reply With Quote
  #16  
Old 28-01-2011, 11:27 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Thanks guys new pics will be available and uploaded maybe next week or after build,this depends if Neil will send some picture...
Our spec is now changing from MD we are going for SC46,we are hoping for at least 450bhp...
ECU will be for this time OE(with ALS via Group N Rom and Mafless feature as well),if money allow at summer will be fitted Syvecs.
And we are go for Cosworth Baffled Sump(Dry sup setup is little bit expensive) and some other mods,which are still under going thinking,as i said we will see...

Hugh good to see you again,hope you will get your RA on track soon.Yes,we are going for SC46.........



Jura

Granby i've seen/read your "Stealth" project nice reading and very interesting at once...
Hope you will get another wagon...
Reply With Quote
  #17  
Old 29-01-2011, 12:26 PM
SUBARMAN's Avatar
SUBARMAN SUBARMAN is offline
Platinum Member
 
Join Date: Sep 2008
Location: East Sussex
Posts: 2,988
Default

Quote:
Originally Posted by jura11 View Post

Granby i've seen/read your "Stealth" project nice reading and very interesting at once...
Hope you will get another wagon...

We hope so too!!!

__________________
Toyobaru 86 with Cosworth exhaust brakes and supercharger, Cosworth mapping, Eibach lowering springs, OZ alloys, fast road geo and various cosmetics. Great fun!
Reply With Quote
  #18  
Old 13-02-2011, 06:47 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Ok guys toady some parts arrive from USA:


AEM Uego Wideband AFR



Eibach Anti Roll bar kit



GT Spec Cooling Panel(sorry for crappy picture,i'm not best photographer)



Blouch Dominator 3.0XT-R(Billet turbo,here is known as SC50)



Hella Supertone Horns



HKS Oil Cap and Blitz Header Tank Cap




and few days ago arrive CDF Droplink set,really pleased with these





Jura
Reply With Quote
  #19  
Old 13-02-2011, 06:58 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
 
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default

are you not having a syvecs ?
__________________
Eat, Sleep, Race , Repeat
Reply With Quote
  #20  
Old 13-02-2011, 07:05 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by C. J. View Post
are you not having a syvecs ?
At moment no,i go at moment with OE ECU with bigger MAF tube(as MAF have limits)and switchable maps with Group N Rom(which allow run ALS,Speed Density and other functions)
Syvecs will be fitted maybe at May/June if money allow...








Jura
Reply With Quote
  #21  
Old 13-02-2011, 07:07 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
 
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default

just if you fitted a syvecs no point in the wide band meter .
just need a sensor to ecu .
job done, one less worry gauge to look at too!
__________________
Eat, Sleep, Race , Repeat
Reply With Quote
  #22  
Old 13-02-2011, 07:11 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by C. J. View Post
just if you fitted a syvecs no point in the wide band meter .
just need a sensor to ecu .
job done, one less worry gauge to look at too!
Great point,again too fast we are thinking and we are buying what we don't need, typically.
Thanks for that..




Jura
Reply With Quote
  #23  
Old 13-02-2011, 07:14 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
 
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default

If it was me i'd find the money for the syvec's ,it'll save you mapping twice and give a lot better results
__________________
Eat, Sleep, Race , Repeat
Reply With Quote
  #24  
Old 13-02-2011, 07:21 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by C. J. View Post
If it was me i'd find the money for the syvec's ,it'll save you mapping twice and give a lot better results
Yes money we have prepared for SYVECS,but some unexpected problems occurred and we must wait until May/June.
Syvecs is too big and too much for our budget at moment,maybe at May/June.
Syvecs will give me better results and will give me safety feature which i want Knock Correction,due this i don't want Simtek at moment,because this feature is missing.
Really good point,but at moment its not possible.
Reply With Quote
  #25  
Old 18-02-2011, 03:41 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Little bit update,probably we are going for standard look with standard STi bonnet with standard headlights...



Jura
Reply With Quote
  #26  
Old 18-02-2011, 03:45 PM
worzel
Guest
 
Posts: n/a
Default

I can't believe I haven't spotted this thread before!

Thats a stunning wagon matey! Very nice indeed
Reply With Quote
  #27  
Old 18-02-2011, 04:31 PM
Guy B Guy B is offline
Silver Member
 
Join Date: Jul 2009
Location: Surrey
Posts: 524
Default

Quote:
Originally Posted by jura11 View Post
Little bit update,probably we are going for standard look with standard STi bonnet with standard headlights...



Jura
I hear what your saying with the bonnet Jura but personally I like the lights, makes it look mean as hell
Glad it's all coming along nicley
Reply With Quote
  #28  
Old 19-02-2011, 04:38 PM
AndyWRX's Avatar
AndyWRX AndyWRX is offline
Platinum Member
 
Join Date: May 2009
Location: Surrey
Posts: 2,772
Default

looks really good fella comming on nicely
__________________
Reply With Quote
  #29  
Old 20-02-2011, 05:51 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by worzel View Post
I can't believe I haven't spotted this thread before!

Thats a stunning wagon matey! Very nice indeed


Thanks you for kind comment




Jura
Reply With Quote
  #30  
Old 20-02-2011, 05:55 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by AndyWRX View Post
looks really good fella comming on nicely
Thanks for kind comment





Jura
Reply With Quote
  #31  
Old 04-03-2011, 04:34 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Some sneak pics from Slowboy Racing of mine build,i'm now waiting on some build up pictures





Last edited by jura11; 04-03-2011 at 04:41 PM.
Reply With Quote
  #32  
Old 04-03-2011, 04:57 PM
Chunk Chunk is offline
SES Mercedes Division
 
Join Date: Jan 2009
Location: Redhill, Surrey
Posts: 2,163
Default

Nice one mate

Waiting for more pics!!!
Reply With Quote
  #33  
Old 04-03-2011, 05:24 PM
Nige
Guest
 
Posts: n/a
Default

Its getting there buddy.
Reply With Quote
  #34  
Old 06-03-2011, 08:32 PM
trails trails is offline
Bronze Member
 
Join Date: Sep 2008
Location: in the woods
Posts: 157
Default

a do like a quick wagon...good luck with it
Reply With Quote
  #35  
Old 06-03-2011, 10:50 PM
Crowman
Guest
 
Posts: n/a
Default

Cant beleive ive missed this thread also.

Great wagon
Reply With Quote
  #36  
Old 29-03-2011, 09:02 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Some updates:

Car is not still ready,due we are still adding more and more items which we are want to fit such as
Apexi AVC-R(which we are brought new one yesterday)
We are want Anodized Intercooler pipes
GT Spec Headers(Thanks to James@GRD)
HKS Titanium Tip Exhaust with Hayward and Scott Downpipe
We are still considering ROTA G-FORCE,will hopefully look like this


We are brought JDL Bumper Lip and JDL sideskirts,which hopefully will look like this



Engine built has been slowing down on side of Machine shop which where has been engine sent for machine work and skimming and almost 3 weeks took get engine back,hopefully car will be ready in next two weeks.

Thanks guys for kind comments




Jura

Last edited by jura11; 29-03-2011 at 09:05 PM.
Reply With Quote
  #37  
Old 29-03-2011, 09:12 PM
Hongkongfooi's Avatar
Hongkongfooi Hongkongfooi is offline
Platinum Member
 
Join Date: Dec 2008
Location: East Sussex
Posts: 5,783
Default

Only just noticed it's an auto gearbox...will this cope with the new power?
Reply With Quote
  #38  
Old 29-03-2011, 09:26 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by Hongkongfooi View Post
Only just noticed it's an auto gearbox...will this cope with the new power?
Yep its auto gearbox,probably will cope,but on how long we don't know.Few guy on Nasioc run several months with 500whp on standard 4EAT and we are hopping in this too..
In next month we are going to RedVictor1 which are professionals in building and rebuilding auto boxes and hopefully will make our gearbox stronger which will cope with some addons and 600bhp.
If will be expensive to built only way will be 6speed and paddle shifter from Kaps.


Jura
Reply With Quote
  #39  
Old 30-03-2011, 12:12 AM
ralliart didz's Avatar
ralliart didz ralliart didz is offline
Gold Member
 
Join Date: Aug 2009
Location: outside
Posts: 1,812
Default

jura,that pic of the blue wagon looks the nuts and the rear diffuser on the white 1.get some more pics up of your car does the kick down still work on your auto box
Reply With Quote
  #40  
Old 30-03-2011, 08:10 AM
majorscooby majorscooby is offline
Platinum Member
 
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default

MMM that looks lush, loving those wheels! Brings back some memories
__________________
Cooper man!!!!!
Reply With Quote
  #41  
Old 30-03-2011, 01:34 PM
SUBARMAN's Avatar
SUBARMAN SUBARMAN is offline
Platinum Member
 
Join Date: Sep 2008
Location: East Sussex
Posts: 2,988
Default

Quote:
Originally Posted by majorscooby View Post
MMM that looks lush, loving those wheels! Brings back some memories

One day you will rise again!!!!! The Squadron awaits............

__________________
Toyobaru 86 with Cosworth exhaust brakes and supercharger, Cosworth mapping, Eibach lowering springs, OZ alloys, fast road geo and various cosmetics. Great fun!
Reply With Quote
  #42  
Old 30-03-2011, 04:21 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Quote:
Originally Posted by didlo View Post
jura,that pic of the blue wagon looks the nuts and the rear diffuser on the white 1.get some more pics up of your car does the kick down still work on your auto box
Hi there here are older pics of mine bugeye wagon,and about the kick down still work but only if i rive in auto mode,not in tiptronic mode.

Wagon look like this when we are brought








Later we are ad some other parts







And now you know how it look,but newer pics i don't have at moment my camera is broken


Jura
Reply With Quote
  #43  
Old 30-03-2011, 05:13 PM
majorscooby majorscooby is offline
Platinum Member
 
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default

Quote:
Originally Posted by SUBARMAN View Post
One day you will rise again!!!!! The Squadron awaits............

I really do hope so keith, i really do !
__________________
Cooper man!!!!!
Reply With Quote
  #44  
Old 01-04-2011, 09:44 PM
SUBARMAN's Avatar
SUBARMAN SUBARMAN is offline
Platinum Member
 
Join Date: Sep 2008
Location: East Sussex
Posts: 2,988
Default

Quote:
Originally Posted by majorscooby View Post
I really do hope so keith, i really do !



We want you back!! After you've been infected with the 555 strain, you only ever leave the Squadron in a box!





__________________
Toyobaru 86 with Cosworth exhaust brakes and supercharger, Cosworth mapping, Eibach lowering springs, OZ alloys, fast road geo and various cosmetics. Great fun!

Last edited by SUBARMAN; 01-04-2011 at 09:47 PM.
Reply With Quote
  #45  
Old 23-04-2011, 02:12 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Hi guys here are couple of sneak pictures from our build,nearly there and hopefully car will be finished in coming weeks


































Jura
Reply With Quote
  #46  
Old 23-04-2011, 02:24 PM
Guy B Guy B is offline
Silver Member
 
Join Date: Jul 2009
Location: Surrey
Posts: 524
Default

Looking very nice Jura
Reply With Quote
  #47  
Old 23-04-2011, 02:24 PM
BIG"E"'s Avatar
BIG"E" BIG"E" is offline
Events / Ring Trip Organiser
 
Join Date: Sep 2008
Location: Hastings
Posts: 8,901
Default

Very nice mate.
__________________
Keep it on the black stuff and leave the pit boards alone
Reply With Quote
  #48  
Old 23-04-2011, 02:41 PM
jura11's Avatar
jura11 jura11 is offline
Silver Member
 
Join Date: Jan 2011
Location: Ashford
Posts: 1,085
Default

Thanks guys for kind comment,nearly there can't wait


Jura
Reply With Quote
  #49  
Old 23-04-2011, 03:04 PM
Hongkongfooi's Avatar
Hongkongfooi Hongkongfooi is offline
Platinum Member
 
Join Date: Dec 2008
Location: East Sussex
Posts: 5,783
Unhappy

Looks good matey.....it seems to have taken a while though even by my build standards what's the delay for?
Reply With Quote
  #50  
Old 23-04-2011, 03:15 PM
Nige
Guest
 
Posts: n/a
Default

Going to be good. I like the fact you have your own idea's on how you want the engine bay to look. As Mr fooi has said whats the delay?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools



All times are GMT +1. The time now is 10:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.