South East Scoobies  

Go Back   South East Scoobies > The Garage > General Mechanics

Reply
 
Thread Tools
  #1  
Old 20-06-2012, 07:17 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default car seems to have a flat spot

As above,the car hesitates in 1st,2nd, and 3rd at 2400rpm and at 3300 in 4th and 5th.
I am guessing its the MAF(by reading other posts and as said pure guess work).I take the MAF is in the square thing with a purple sticker on it,by the air filter?

Like i said i am guessing,so any ideas would be helpful

many thanks Jason
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
  #2  
Old 20-06-2012, 07:46 PM
urabusMY94 urabusMY94 is offline
Bronze Member
 
Join Date: Sep 2008
Location: West Sussex
Posts: 292
Default

Just had my MAF replaced as it turns out it was on way out then finally gave up with CEL warning....
Car felt like it was constantly hesitating, retarding and adjusting as boost came in.
Found it noticeable even at low RPM when engine cold. Got better as everything warmed up but still felt it on boost.
No error messages until MAF gave up really confused me.
Good luck with sorting issue
Cheers

Last edited by urabusMY94; 20-06-2012 at 07:47 PM. Reason: Spwelling
Reply With Quote
  #3  
Old 20-06-2012, 08:26 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

Just to add ,can you clean the maf and if i buy one do i have to get a purple one(same as mine) or can you use the other ones with different colour stickers???
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
  #4  
Old 20-06-2012, 09:15 PM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

MAF needs to be identical..............
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #5  
Old 21-06-2012, 06:57 AM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

Morning bump
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
  #6  
Old 21-06-2012, 06:52 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

Anyone?
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
  #7  
Old 21-06-2012, 07:10 PM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

have you done a diagnostic, this will certainly help point you in the right direction

whilst is sounds MAF related it may well be an air leak, etc
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #8  
Old 21-06-2012, 09:42 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

Quote:
Originally Posted by asperformance View Post
have you done a diagnostic, this will certainly help point you in the right direction

whilst is sounds MAF related it may well be an air leak, etc
Is that where you connect the 2 plugs under the dash?
If it is,no not yet will have a go tomorrow but never done it before!
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
  #9  
Old 21-06-2012, 10:18 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

Sorry for all the questions but does anybody know would it be ok to drive(local)
or will I do damage
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
  #10  
Old 22-06-2012, 09:45 AM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

ok tried this morning to see if i could get a fault code.
done it as per jolly green monster website,dont know if it worked.connected connecters together done the accelerater thingy but when started the engine up the check light doesnt flash so i am guessing there is no faults showing(or i am doing something wrong)

i am going to buy some cleaner and see if that helps.if not there is a maf on ebay for £45 is that a reasonible price???
cheers jason
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
  #11  
Old 22-06-2012, 07:03 PM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

you only switch the ignition on to check for codes.................

wih the 2x black single connectors connected together the CEL light should flash, if its a constant rythym then no fault is stored
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #12  
Old 22-06-2012, 07:23 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
 
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default

What fuel you using ?
Reply With Quote
  #13  
Old 22-06-2012, 09:32 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

Tesco 99
And as for the checking I think I must be doing it wrong
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
  #14  
Old 23-06-2012, 12:22 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

Right checked the fault codes this morning,and its 3long 2short,which is the oxygen sensor.
Any ideas on where it is and can it be cleaned or is it replace only

Cheers jason
__________________
If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 10:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.