South East Scoobies  

Go Back   South East Scoobies > The Garage > General Mechanics
Reload this Page 98 classic no compression on 2 cylinders
FAQ Calendar

Reply
 
Thread Tools
  #1  
Old 04-04-2017, 06:56 PM
ScoobynShag's Avatar
ScoobynShag ScoobynShag is offline
Regular User
  
Join Date: Apr 2017
Location: Eastbourne
Posts: 21
Default 98 classic no compression on 2 cylinders
Hi all, joined this morning so new to this forum.

Basically had a so called low mileage engine fitted to my classic at the end of last year, the supplier said it was a good engine with no issues and had been tested.

My mechanics done all work needed during the swap and once it was started it was missing on both cylinders on the right bank (looking from front of car), compression test showed 0 compression on both cylinders, could this be a timing error or is it the head gasket completely gone, apart from the obvious issue the engine is sound, the supplier hasn't responded to any messages of mine in 4 months and the garage are refusing to do any more work on it until they are paid. What can I do, I've spent 1000's on having all this done and still don't have the car working. Gutted is an understatement !!!

Any ideas people
Reply With Quote
  #2  
Old 04-04-2017, 07:16 PM
Neil97rs's Avatar
Neil97rs Neil97rs is offline
Silver Member
  
Join Date: Aug 2012
Location: Hastings
Posts: 642
Default
0 compression on both cylinders sounds like engine out and rebuild time. I know a very good man in Hastings that could do this but again it's going to cost . Rebuild is £1500 if not going forged. Or so I'm told
Reply With Quote
  #3  
Old 04-04-2017, 07:37 PM
ScoobynShag's Avatar
ScoobynShag ScoobynShag is offline
Regular User
  
Join Date: Apr 2017
Location: Eastbourne
Posts: 21
Default
They also said that air was coming out of the servo pipe, any ideas on that ?
Reply With Quote
  #4  
Old 04-04-2017, 07:58 PM
ScoobynShag's Avatar
ScoobynShag ScoobynShag is offline
Regular User
  
Join Date: Apr 2017
Location: Eastbourne
Posts: 21
Default
Did you buy anything from me on scoobynet, I sold a 3" sportcat downpipe on there to someone from Hastings ?
Reply With Quote
  #5  
Old 04-04-2017, 09:03 PM
Neil97rs's Avatar
Neil97rs Neil97rs is offline
Silver Member
  
Join Date: Aug 2012
Location: Hastings
Posts: 642
Default
Yes that was me
Reply With Quote
  #6  
Old 04-04-2017, 09:04 PM
Neil97rs's Avatar
Neil97rs Neil97rs is offline
Silver Member
  
Join Date: Aug 2012
Location: Hastings
Posts: 642
Default
As for the air coming out I have no idea why that would be
Reply With Quote
  #7  
Old 04-04-2017, 09:57 PM
chrisp chrisp is offline
Bronze Member
  
Join Date: Mar 2009
Location: Aldershot
Posts: 474
Default
£1500 is a very cheap rebuild, even not going forged, I rebuilt a set of avcs heads and pit them on the car and even doing a lot of bits myself it was still nearly 1k
__________________
STI Type RA v3
Reply With Quote
  #8  
Old 04-04-2017, 10:18 PM
ScoobynShag's Avatar
ScoobynShag ScoobynShag is offline
Regular User
  
Join Date: Apr 2017
Location: Eastbourne
Posts: 21
Default
It's just cost me a fortune for nearly a year and the car still isn't on the road, so gutted about it, I would do it myself but I sold all my equipment to do it. I'll have to start saving
Reply With Quote
  #9  
Old 04-04-2017, 10:57 PM
scotty's Avatar
scotty scotty is offline
Platinum Member
  
Join Date: Aug 2012
Location: In ma bed
Posts: 5,807
Default
Who did you buy the engine from a breaker or just some joe bloggs .
__________________
Maintained by Hypertech and Mapped by Andy Forrest

1998 UK Turbo , 1998 Terzo , 1997 JDM Type R the money pit , 2004 black WRX STI Type UK , 2004 blue FSTI
Reply With Quote
  #10  
Old 05-04-2017, 05:42 AM
ScoobynShag's Avatar
ScoobynShag ScoobynShag is offline
Regular User
  
Join Date: Apr 2017
Location: Eastbourne
Posts: 21
Default
Hi, bought the engine from a so called reputable JDM engine importer, so he says. I'm sure I have rights to somehow get my money or some sort of compensation for it ?
Reply With Quote
  #11  
Old 05-04-2017, 12:55 PM
Neil97rs's Avatar
Neil97rs Neil97rs is offline
Silver Member
  
Join Date: Aug 2012
Location: Hastings
Posts: 642
Default
You must have some sort of rights but would involve a small claims court. But is only a small fee
Reply With Quote
  #12  
Old 06-04-2017, 07:22 AM
Frenchie's Avatar
Frenchie Frenchie is offline
Gold Member
  
Join Date: May 2009
Location: Bretteville(Normandie)
Posts: 1,894
Default
If you can prove your case small claims court is an easy and cheap option.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 04:59 PM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.