My turbo

[Scooby Wez]

Well had her a couple weeks now and bar a couple of problems i am very pleased .Fssh has a few miles 144k but it was the best i could get for 2k looked at a lot of others with lower miles but had all been messed about with and i wanted as near standard as possible.Have put some clear lens on,boost gauge,strut brace and may be a box back in the future,but after years driving classic cars it feels like a rocket so will not be uping the power for a while.
Heres the pic's:----



And this is what i was driving

[DukeBoy]

Looking nice, see you at a meet soon

Looks nice and clean matey. Loving the Capri too

As Rich said, hope to see you at a meet soon.

Right lads, bets on the first mod to happen?

New Back Box / SES Pig Stickers - Evens
Front Splitter - 2/1
Alloys - 5/2
White Line - 7/2
Polar Re-Map - 10/1
All others - 25/1

[C. J.]

Welcome along

[Cath]

defo the backbox, get rid of the twin pipe

[Scooby Wez]

Originally Posted by worzel

Looks nice and clean matey. Loving the Capri too

As Rich said, hope to see you at a meet soon.

Right lads, bets on the first mod to happen?

New Back Box / SES Pig Stickers - Evens
Front Splitter - 2/1
Alloys - 5/2
White Line - 7/2
Polar Re-Map - 10/1
All others - 25/1

When is the meet in Jan if there is one as i have a big back operation early Feb so will off the road for about 8 weeks

Ok were do i get my sticker and t-shirt
Back box- looking at the moment
Front splitter-mmmmmmmm maybe a P1 type
Alloys-I like the standard ones for the moment
White line-DO NOT DO DRUGS
Polar Remap-will have to have a chat on this one
All others-depends on the bank balance

Think that covers it :P

[Scooby Wez]

Originally Posted by Cath

defo the backbox, get rid of the twin pipe

I was just looking at a Remus box with twin pipe keep it sort of standard looking.

[2-jaffacake-tone]

hello mate 144k thats only just run in not a big fan on the twin exit but up to you

[majorscooby]

Looks nice and clean for a classic. get yourself some pig stickers for your mirrors!!!

[DukeBoy]

Originally Posted by majorscooby

get yourself some pig stickers for your mirrors!!!

Just like these.....

[Scooby Wez]

Originally Posted by 2-jaffacake-tone

hello mate 144k thats only just run in not a big fan on the twin exit but up to you

Now being new to these things is 144k bad then it does have full Subaru history right up to date.When i was looking there were a couple that had 75-80k on them but were not half as nice and the motors sounded a lot rougher.It's a lot nicer to drive now i have replaced the maf and put a standard filter in along with doing the boost solenoid

[2-jaffacake-tone]

depends on previous drivers i.e was being warmed up before thrashed etc. i dont know that many cars witch have that sort of miles on original engine.
but regular oil changes ect helps

[jonnyricer]

how mch are the stickers?????

[Scott.T]

Funny to see you on here Shane B was only talking about you today and that you had a scoob.

Good to see you on here, got ya email re : being banned from the 'other' site.
It a long storey as to why...well no actually it's really short......but I'll save it for now.

Needless to say it's one of he reason's this site came about......

Where do we start with your MY00.....hmm if you wanna pop round and take a look at my MY00 then it may give you a few idea's. It has done 100,000 less then yours though, and isn't 'quite' as clean as my old Series 1 Turbo.

P.S Do you know or have anything to do with the Hastings Pine Warehouse, as may of spotted the car on their 'home' drive.

[Scooby Wez]

Originally Posted by SilverSurfer

P.S Do you know or have anything to do with the Hastings Pine Warehouse, as may of spotted the car on their 'home' drive.

Hi mate
Have nothing to do with the above and do you mean you spotted my car,it's has been round this area 'hc' is a Hastings number plate and it has been serviced by Culverwells in the past.
I will take you up on that offer.I take it you can give my ecu a new lease of life

[Cath]

Originally Posted by 2-jaffacake-tone

not a big fan on the twin exit but up to you

Me neither matey but if thats the way you want to go thats great

[Cath]

http://www.sussexscoobies.co.uk/forums/ ... php?t=7105

[Scooby Wez]

I hope he gets my PM on there as still not aloud to post on the site.I was looking at them ninja's with the sound files on scoobyworld last night.

[DukeBoy]

Could always ask someone to PM him for you that can post on there, just to make sure he gets it

[Scooby Wez]

If any one could pop a reply up to say i have pm'ed that would be great All sorted just heard back from Brad :P

[C. J.]

sorry cant help there

[Cath]

Just pm him on here

[Scooby Wez]

It's sorted thanks Cath going to see the pipe tomorrow.

[Cath]

[classicP1]

Looks really nice mate,dont see that many in this condition anymore

[Scooby Wez]

Ok the bug has bitten My nice standard car will have by the end of the week green filter,new exhaust,sti6 frt splitter,sti strut brace and if all goes well a new ecu So thats the budget caned in one go

Originally Posted by Scooby Wez

Ok the bug has bitten My nice standard car will have by the end of the week green filter,new exhaust,sti6 frt splitter,sti strut brace and if all goes well a new ecu So thats the budget caned in one go

You know it makes sense, you wont stop now you've started

Knew it would happen!

[Scooby Wez]

Well i could not help it all these bit's just turned up did not think it would happen tis quick

[pirate]

nice scoob mate i was a classic nut till last year , sold my works escort mk 1 in march, and the mk1 van just before, still got a beach buggy in the garage possible scoobie power for that this year ,..

[SUBARMAN]

Great stuff Wez - see Worzel for the "Wagon Conversion Kit". It is cheap cos made of cardboard!

High quality cardboard though

[Scooby Wez]

Got then Exhaust and green filter fitted and it's runs a whole lot better seam's to pick up quicker.Also got my sti front lip spoiler

[Cath]

NINJA !!!

Very nice, how much did the splitter cost you

[Scooby Wez]

It was from Scooby parts and genuine Subaru £137 that included the fittings it was the one i realy wanted and my bumper had the holes were in my bumper for the fittings so took 10 mins to fit

[JimBob]

very clean mate,
you had the same idea as me, i got exactly the same as u, a turbo2000 completely standard,
you only have to change a couple of bits to personalize them and they look awsome!

have fun driving!

[jonnyricer]

looking and sounding good man!

i thought i recognized you the other day and its just clicked,about 2 years ago i was looking at swapping my scoob for a mate of yours who had an evo 2. you looked over my silver wrx outside his place.

[Scooby Wez]

Yep i know the one i thought it was a nice car,better then the evo that my Neighbour owned he sold that in the end for not a lot.

[Scooby Wez]

Well it all seams to be coming together nicely Zero slam panel cover,headlight covers and number plates fitted and going tomorrow to pick up some st-2 wheels with near new p-zero's after some serious haggling got them for a steal They do need a little work but manly paint peel.So another 400 mile round trip for the car thats 1200 miles in less then 10 days.


On the to do list oil pressure gauge and dent magician can not live with the car park dings much longer.

Nice one mate, Coming on well.

[Cath]

I see the bug has started I thought you weren't gona down the wheels just yet

[Scooby Wez]

They are then ones i wanted and the only set i have seen so just had to go for it

[Scott.T]

Nice one Wez, best 17's for a Scoob IMHO.
Should be fairly easy to tidy too...so will they be done Silver or Anthracite ????
Get 4 prodrive logo off ebay to whack on a spoke and will look v.nice

Here's one of my old ones. The Prodrive logo needs to be the correct font for the period. The current one is a thinner font



When you collect the wheels make sure they have the metal inserts mounted where the wheel nuts fit. This allows you to use stndard Subaru wheelnuts.
If they havn't they are not Genuine Prodrive supplied items, but Speedline supplied.
If they do not have the inserts you will need to get a set of Speedline Nuts which have the correct flange/taper.

The wheels are the same, just Prodrive/Subaru ensured the inserts where fitted for us with Subaru wheelnuts.

[Scott.T]

see this link : http://bbs.scoobynet.com/general-techni ... where.html

Funny enough I posted on here too... Mike Woods actually works at Prodrive and is involved/was invlolved in such upgrades.

another : http://bbs.scoobynet.com/wheels-tyres-b ... -nuts.html

it sounds like you just need to either call speedline or try a 'regular' non subaru set of nuts.

when I had a gold set of ST-2's these did not have the insert and hence came with a new set of nuts to suite.

[Scooby Wez]

Thanks mate they have the metal inserts but as it says on the threads you have posted they only use the bottom half of the taper so give the appearance of not fitting.Sorry for the poor pic's,the wheels are better then i expected very little curbing and mostly paint peel the pic is of the worse one.

Originally Posted by Scooby Wez

[img]http://img228.imageshack.us/img228/888/spiltexhaust6sr4.jpg[/img]

Would look great on my wagon Does it affect the handling of the front end much?

Loving the Capri by the way, I owned for a short time a 2.0L S MK II running about 150bhp

[Scooby Wez]

Update to daylight pic.I like the gold with the blue so think thats the colour they will stay

Went out to Culverwells Subaru today and round the bends at Whatlington it felt a lot more planted to the road.

I have not noticed any difference with the splitter and to be honest got it because it matches the rest of the trim and even's it up.

[DukeBoy]

Very nice

[Cath]

Nice Your gona have to change your profile pic now

[Scooby Wez]

Took a few pic's today after a bit of a clean.




Where has the standard car i brought gone