South East Scoobies  

Go Back   South East Scoobies > The Garage > Chassis Tuning
Reload this Page DIY camber gauge
FAQ Calendar

Chassis Tuning It's All About The Twisties

Reply
 
Thread Tools
  #1  
Old 26-01-2014, 04:04 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default DIY camber gauge


About a dozen nuts and bolts, two dome nuts to touch on the wheel, a couple of strips of steel, a length of threaded bar and an ebay spirit level....good enough for a basics check :
Reply With Quote
  #2  
Old 26-01-2014, 04:18 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default
Same as I made
Reply With Quote
  #3  
Old 26-01-2014, 04:37 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default
Quote:
Originally Posted by C. J. View Post
Same as I made
Cool.....it seems to work well and a damn site cheaper then buying a real one which cost ££££££££££.

1.7 negative camber may be a touch too much though.
Reply With Quote
  #4  
Old 26-01-2014, 04:42 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default
I run 2 to 3 degrees
Reply With Quote
  #5  
Old 26-01-2014, 04:44 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default
Prodrive setting is 1.8 front 1.6 rear
Reply With Quote
  #6  
Old 26-01-2014, 05:03 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default
Is it ?
For some reason I had it in my head that it was 1.5 front.
I'll leave it as is then as you would struggle to get 1.8 without camber bolts.
Mine is achieved with the camber bolt on the most negative position and the hub given a good shuv before nipping the bolts up.
Reply With Quote
  #7  
Old 26-01-2014, 05:08 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default
I may be wrong but thought that was what gatwick did to the bug . But that was a while ago
Reply With Quote
  #8  
Old 26-01-2014, 05:47 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default
Just read a post/thread by bob rawle quoting prodrive settings of 1.3/1.4 negative on the front and 1.1/1.2 negative on the rear.
I may knock mine back a touch as it was tram lining a bit in the hgv grooves yesterday.
Reply With Quote
  #9  
Old 26-01-2014, 07:28 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
My bug was 1.9/1.6 when done at Gatwick (Dave H) brilliant but did grab hold of rut/white lines!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #10  
Old 26-01-2014, 07:29 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
Out of interest how do you check the car is level?
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #11  
Old 26-01-2014, 07:42 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default
Quote:
Originally Posted by BlueBugEye View Post
Out of interest how do you check the car is level?
It's on a level floor.
Reply With Quote
  #12  
Old 27-01-2014, 06:36 AM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
  
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default
So the assumption is that the body is level, which I guess is the same as a std geo - I wonder how far out you are if compared to a hunter?

I guess if you're properly corner weighted that the body will sit level.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #13  
Old 29-01-2014, 09:21 PM
drakesnow drakesnow is offline
Bronze Member
  
Join Date: Jul 2012
Location: South east
Posts: 493
Default
If I recall scott some of those threads posted prodrive settings in minutes, so in reality its like 1 degree 30 minutes = 1.5 degrees if I understand that correctly?
Reply With Quote
  #14  
Old 29-01-2014, 09:46 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default
Quote:
Originally Posted by drakesnow View Post
If I recall scott some of those threads posted prodrive settings in minutes, so in reality its like 1 degree 30 minutes = 1.5 degrees if I understand that correctly?
I've seen that too. I think it was 1 Degree 10 minutes which around 1.2 degree's
I think standard Subaru settings at a Kwikfit type outfit are 0 - 1 Degree
Reply With Quote
  #15  
Old 29-01-2014, 10:26 PM
drakesnow drakesnow is offline
Bronze Member
  
Join Date: Jul 2012
Location: South east
Posts: 493
Default
lol Kwikfit Im running 1.5 front 1.3 rear on my classic and its good. Could probably do a bit more but didnt want it too tram-liney or excessive wearish with road use.
Reply With Quote
  #16  
Old 30-01-2014, 08:23 AM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
  
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default
i like that scott looks good would like to check my bug so il have to knock on up
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 10:51 PM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.