South East Scoobies  

Go Back   South East Scoobies > The Garage > Engine Management
Reload this Page Rpm reading
FAQ Calendar

Engine Management For all your mapping,diagnostics and electronics

Reply
 
Thread Tools
  #1  
Old 29-05-2013, 12:23 AM
tank_wrx tank_wrx is offline
Bronze Member
  
Join Date: Aug 2012
Location: albourne
Posts: 137
Default Rpm reading
Typical as ever I've had the clocks out my v1 classic to wire a few extras in on putting the clocks back I managed to knock them so the neddle fell from the stop point and only noticed when starting the car .

Iv taken the clock out and the cover off putting the neddle back on its bump stop but now when I start it the idle shows at 0 and then revving it its 1000rpm out how do I fix this cheers
Reply With Quote
  #2  
Old 29-05-2013, 12:49 AM
Mortster's Avatar
Mortster Mortster is offline
Gold Member
  
Join Date: Apr 2009
Location: Milford, Surrey
Posts: 2,432
Default
Adjust the needle when its running, find out the factory idle level when warmed up, and just line it up.

Be careful though, if there like newage clocks, they never go back in properly.
__________________
2001 Bugeye - Project Black/Red, 1997 JDM Type R, 1995 V1 WRX, Defender Tithonus MOD Styleeee!
Reply With Quote
  #3  
Old 31-05-2013, 12:51 AM
tank_wrx tank_wrx is offline
Bronze Member
  
Join Date: Aug 2012
Location: albourne
Posts: 137
Default
Perfect it's done the job roughly I've got a aftermarket rpm system it just bugged me the rpm was out on the clocks cheers
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 07:17 AM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.