South East Scoobies  

Go Back   South East Scoobies > The Garage > General Mechanics

Reply
 
Thread Tools
  #1  
Old 10-05-2016, 09:35 PM
Matt23's Avatar
Matt23 Matt23 is offline
Silver Member
 
Join Date: Feb 2010
Location: south london
Posts: 1,002
Default Is it possible?

Just wondered if it's possible to remove the rear ARB and still drive the car without any problems ?
My reason for this question is, I've got a really annoying squeak coming from the rear and I believe the ARB to be the cause and wanted to remove it just to see if I'm right and see if the noise goes.

Any input would be appreciated

Matt
Reply With Quote
  #2  
Old 10-05-2016, 09:45 PM
Banstead Stig's Avatar
Banstead Stig Banstead Stig is offline
Gold Member
 
Join Date: Feb 2012
Location: Banstead
Posts: 2,258
Default

You can definitely drive without it, but don't give it too much welly!

If you're just testing for the noise it should be apparent quite quickly, so you won't need to go far.
Reply With Quote
  #3  
Old 10-05-2016, 10:25 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

Grease up your ARB bushes.
If it's a whiteline they may be dry and squeaky.
Reply With Quote
  #4  
Old 11-05-2016, 08:04 AM
Matt23's Avatar
Matt23 Matt23 is offline
Silver Member
 
Join Date: Feb 2010
Location: south london
Posts: 1,002
Default

Quote:
Originally Posted by Scott.T View Post
Grease up your ARB bushes.
If it's a whiteline they may be dry and squeaky.
Yes they are new Whiteline bushes Scott, they've been on the car for a few months now with no problems, but they are supposed to be dry bushes that don't need grease (says so on the pack anyway).
Reply With Quote
  #5  
Old 11-05-2016, 08:09 AM
Matt23's Avatar
Matt23 Matt23 is offline
Silver Member
 
Join Date: Feb 2010
Location: south london
Posts: 1,002
Default

Quote:
Originally Posted by Banstead Stig View Post
You can definitely drive without it, but don't give it too much welly!

If you're just testing for the noise it should be apparent quite quickly, so you won't need to go far.
Thanks Garath, I will give it a go when I get some spare time to try it
Reply With Quote
  #6  
Old 11-05-2016, 08:15 AM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

I use a white lithium grease on my bushes

See below for a useful article on this:
http://www.suspensionconnection.com/...thane-bushing/
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #7  
Old 11-05-2016, 09:58 AM
Matt23's Avatar
Matt23 Matt23 is offline
Silver Member
 
Join Date: Feb 2010
Location: south london
Posts: 1,002
Default

Quote:
Originally Posted by BlueBugEye View Post
I use a white lithium grease on my bushes

See below for a useful article on this:
http://www.suspensionconnection.com/...thane-bushing/
That's a big help, thanks Nick.

Last edited by Matt23; 11-05-2016 at 12:32 PM.
Reply With Quote
  #8  
Old 11-05-2016, 10:27 AM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

My whitelines needed a grease about once every year to 18 months. Not many miles covered in that period either.
Reply With Quote
  #9  
Old 11-05-2016, 11:18 AM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default


Nothing worse than a dry bush huh Scott?
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #10  
Old 11-05-2016, 12:24 PM
Banstead Stig's Avatar
Banstead Stig Banstead Stig is offline
Gold Member
 
Join Date: Feb 2012
Location: Banstead
Posts: 2,258
Default

Quote:
Originally Posted by BlueBugEye View Post
I use a white lithium grease on my bushes

See below for a useful article on this:
http://www.suspensionconnection.com/...thane-bushing/
Quote:
Originally Posted by Matt23 View Post
That's a big help, thanks Steve.
I have a can of this in my shed Matt, so if you're at the next Epsom Downs meet in a couple of weeks I can bring it along and see if it helps.

As an aside, I think "Steve" is called Nick.
Reply With Quote
  #11  
Old 11-05-2016, 12:26 PM
Banstead Stig's Avatar
Banstead Stig Banstead Stig is offline
Gold Member
 
Join Date: Feb 2012
Location: Banstead
Posts: 2,258
Default

Quote:
Originally Posted by Scott.T View Post
My whitelines needed a grease about once every year to 18 months. Not many miles covered in that period either.
The lack of miles probably doesn't help, ironically.

I get the impression the polybushes prefer to be in use. Certain with the FSTi, mine make less noise now that I do c13k miles a year than they did when I did c4k miles.
Reply With Quote
  #12  
Old 11-05-2016, 12:36 PM
Matt23's Avatar
Matt23 Matt23 is offline
Silver Member
 
Join Date: Feb 2010
Location: south london
Posts: 1,002
Default

Quote:
Originally Posted by Banstead Stig View Post
I have a can of this in my shed Matt, so if you're at the next Epsom Downs meet in a couple of weeks I can bring it along and see if it helps.

As an aside, I think "Steve" is called Nick.
Thanks mate, that would be great

Oh and thanks for pointing out my mistake, it's now been corrected. Sorry Nick.
Reply With Quote
  #13  
Old 11-05-2016, 12:53 PM
Steve_PPP's Avatar
Steve_PPP Steve_PPP is offline
Admin, Meets/Events Organiser
 
Join Date: Sep 2008
Location: Burgess Hill, Sussex
Posts: 13,268
Default

To be fair, if you're not sure on someone's name on here, calling them Steve is normally a safe bet - there's just a few of us
Reply With Quote
  #14  
Old 11-05-2016, 01:07 PM
Banstead Stig's Avatar
Banstead Stig Banstead Stig is offline
Gold Member
 
Join Date: Feb 2012
Location: Banstead
Posts: 2,258
Default

Quote:
Originally Posted by Steve_PPP View Post
To be fair, if you're not sure on someone's name on here, calling them Steve is normally a safe bet - there's just a few of us
Very true!

It's definitely a good technique for meets. Approach a group and say "hello Steve"... chances are someone will respond and you've broken the ice!
Reply With Quote
  #15  
Old 11-05-2016, 01:53 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

I've been called worse!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #16  
Old 11-05-2016, 02:36 PM
Matt23's Avatar
Matt23 Matt23 is offline
Silver Member
 
Join Date: Feb 2010
Location: south london
Posts: 1,002
Default

Quote:
Originally Posted by BlueBugEye View Post
I've been called worse!
My apologies
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 08:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.