South East Scoobies  

Go Back   South East Scoobies > The Garage > Chassis Tuning

Chassis Tuning It's All About The Twisties

Reply
 
Thread Tools
  #1  
Old 04-12-2017, 07:49 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default Custom Springs...... attn Scott!

The front of the Spec B is sitting about 1’ higher than I’d like on the new shocks and springs, the springs are new OE Spec B and the shocks are Bilstein B8s (not quite OE but £300 a shock cheaper than buying from Subaru!). Shock length is slightly shorter than OE.

Does anybody (Scott?) know of a company that can refurbish and shorten my old springs or even make a custom slightly shorter set - maintaining OE spring rates.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #2  
Old 04-12-2017, 10:35 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

We ended up using 2 different companies to produce different spring rates/heights. Both were a bit hit and miss. We dropped the 1st company after the 1st set because the windings on a pair was visually diffetent.
Even with us providing them with about 4 different sets of classic Subaru springs (STi lowered, prodive 1998 and 2 different prodrive 1999 and P1) for them to test and record the resulting springs produced were still very hit and miss.
The final sets were ok but I never did achieve the ride height target.
Imho it's a very difficult process if you do not know the weight applied to the spring when fitted to the car with the car settled on the spring.
Even after alot of work my car ended up 10mm higher than target.
Reply With Quote
  #3  
Old 05-12-2017, 01:09 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Any experience of having OE springs adjusted - I have found a company in Sheffield who claim to be able to modify the stock springs by altering the spring (not cutting so I assume some kind of heating and rewinding), shot blasting and re-powdercoting to give an as new spring with the same spring rate but a 1' reduction in overall length.

There is a slo a company in Chichester that can manufacture new springs (but obviously more expensive especially for a one of set)
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #4  
Old 05-12-2017, 03:11 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

Probably the same company we used in Sheffield.
They may be able you heat and compress the spring but they would have to compress the part of the spring with the widest gap when loaded. The majority of the lower windings compress to touching point at rest. You don't want the open windings compressing to binding point when in motion as the severely effects the spring rating under load.

There is also the risk they will be loose in the struts at full droop if the overall spring length is reduced..

The less windings/coils over an equal spring length with the same gauge steel gives a harder spring rate. So if they rewind rewind them the rates will change. And a harder spring rate will actually give a higher ride height at rest if the maths are incorrect.
It's quite a science.....
Reply With Quote
  #5  
Old 05-12-2017, 03:18 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

If you look at your spring at rest you probably have 1 or 2 very close coils and 2 wide spaced coils.
The close coils give you your compliance and softer ride. Once you lean on them a bit the close coils close and you end up with the stiffer rate of the wider spaced coils.
The wider the spacing the harder the ride.

Think of spring in its raw form as a steel rod. A straight steel rod is solid if you try to compress it over it's length. Put a bend in it and then try to compress it and it will flex. Put some coils in it and it will flex some more.

Linear setups have equal spacing but a standard Subaru strut would not be linear if they were spaced as such. Due to the spring also being tappered. Wider at the bottom than top.
This is also used to create a progressive rating.
Reply With Quote
  #6  
Old 06-12-2017, 10:25 AM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

I'm guessing the springs on the Spec B are progressive as seen here:

I may well send my old set off to be fettled and see what comes back - I'll still have the new ones to replace them if all else fails. The only issue I have is that the standard spring compressors will not compress the springs enough!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #7  
Old 06-12-2017, 05:24 PM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

basically most OEM springs are progressive to some degree
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #8  
Old 06-12-2017, 05:29 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Alyn - any chance you have a supplier for lowering springs for a UK 3.0 Spec B? They seem pretty hard to find!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #9  
Old 07-12-2017, 01:46 PM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

there may be a listing for a very early BP5 chassis (not sure what changed on the later facelift off hand) but few and far between

seems odd you have only encountered this issue after fitting new parts which might suggest the front shock is possibly specced slightly wrong??
would be good to have factory ride heights and compare them to what you have??
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #10  
Old 07-12-2017, 04:41 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Shocks aren’t quite OE Spec as they are direct from Bilstein not the Subaru versions.


Front
Before 375mm centre to arch
After 380mm centre to arch
Difference +5mm

Rear
Before 335mm centre to arch
After 350mm centre to arch
Difference +15mm (mostly due to collapsed rubber washer on original shocks)
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #11  
Old 09-12-2017, 11:40 AM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

a little confused now as you have gained positive rake and yet you seem to think the front should go down??
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools



All times are GMT +1. The time now is 12:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.