#1
|
||||
|
||||
Need to bolt this on too!
Anyone fitted one of these where the TMIC goes? tempted to do that and make use of the dirty great scoob on the blob..
__________________
Somewhere drinking Coffee Mapped and maintained by FBTuning 07595 493581. |
#2
|
||||
|
||||
If that's an oil cooler here is a picture of one sitting outside on the front bumper
|
#3
|
|||
|
|||
Didn't Scooby Greg have his cooler on top, on his Blob?
|
#4
|
||||
|
||||
Seen a few pics in the past of them mounted on top. Didn't someone on here have a problem with their oil cooler being too efficient and the oil never actually getting up to temperature?
|
#5
|
||||
|
||||
I'd think the heat soak would be an issue on top, make sure you use a thermostatic sandwich plate to avoid running too cold. My cooler is between the A/C condenser and the Intercooler, the inner wing is also a good option but mounting is more difficult and you don't get the benefit of the fans cooling when stationary.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter |
#6
|
||||
|
||||
Dave are you nicking all my ideas lol.
problem might be the pump having to get all that oil up there, especially when starting, but I guess with a thermo sandwich plate starting might not be a problem. how do you prime a system like that when doing an oil change? I guess check the oil level once the thermo plate has opened? |
#7
|
||||
|
||||
Quote:
Good question, with the oil filling I guess the same, from my understanding with the 16 row I have up there I will need all 5 litres out of a can instead of the regular 4.2 odd. Still not decided on where the best place is to mount it... head is starting to expand and hurt looking at pictures everywhere and reading NASOC etc. I Like Nicks above, also like Karting Steve's.. I will probably end up putting it somewhere near the front or behind a fog etc. but... look at some of these.. Think this was the one Greg had.. This one out of a pikes peak car.. There are lots more... look good!!! still undecided
__________________
Somewhere drinking Coffee Mapped and maintained by FBTuning 07595 493581. Last edited by Ginola; 06-03-2014 at 01:04 AM. |
#8
|
||||
|
||||
greg had his where the top mount was yes. Put it behind the left fog cover dave.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
|