South East Scoobies  

Go Back   South East Scoobies > The Garage > General Mechanics

Reply
 
Thread Tools
  #1  
Old 03-10-2012, 11:48 AM
tank_wrx tank_wrx is offline
Bronze Member
 
Join Date: Aug 2012
Location: albourne
Posts: 137
Default clutch pedal

hopefully others have had this problem and its not just me !

the clutch pedal seems sticky so to speack on my 1994 classic it comes up half way when releasing the pedal and some times takes a extra second or 2 to come all the way up ?
Reply With Quote
  #2  
Old 03-10-2012, 11:51 AM
andy-m's Avatar
andy-m andy-m is offline
Silver Member
 
Join Date: Apr 2010
Location: SE London
Posts: 1,148
Default

there's adjustment on the pedal in the footwell aparently, sounds like that needs to be adjusted.
Had a similar thing on my last classic except it just wouldnt come up fully following spirited driving unless I hooked my foot under it and lifted. I was told it probably needed adjusting but never got round to it before my engine let go and I got rid of the car
Reply With Quote
  #3  
Old 03-10-2012, 01:14 PM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

you can also get issues if the clutch fluid is old and over-heated, slave cylinder is sticky or the return spring missing.........

or the clutch is simply on its way out!
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #4  
Old 15-10-2012, 06:53 PM
scoobie_paul's Avatar
scoobie_paul scoobie_paul is offline
Silver Member
 
Join Date: Oct 2012
Location: shoreham by sea
Posts: 547
Default

i had this issue recently on my 95 wrx i adjusted the rod on the back of the pedal and hey presto (BUT DO NOT OVER ADJUST LIKE I DID AS CLUTCH WONT FULLY ENGAGE AND SLIPS) i readjusted leaving a very small amount of free play in the pedal there is a 12mm nut locking the rod in place loosen it then swist the rod in/out to adjust , check biting point and free play and once happy tighten 12mm nut back up tight
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.