South East Scoobies  

Go Back   South East Scoobies > The Showroom > Projects

Projects Tell us about your cars mods, past, present and future!

Reply
 
Thread Tools
  #1  
Old 18-01-2018, 05:32 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default Project Family Wagon

Sooo, I always like this part of owning a new car, deciding what mods to buy for it!

Last weekend myself and my wife decided we needed something bigger as we now have an 8 month old, I was currently driving a JDM 1996 Honda Integra DC2 Type R. I love the car loads but unfortunately it was time to move on.
The Wife's criteria was something bigger so we were able to use as a family car, my criteria was something faster as I've never owned a turbo'd car!

After a little searching I stumbled across a 2006 Impreza WRX Wagon for sale on the local selling pages, after studying the pictures I decided to go and see the car for myself. Needless to say after the first test drive I was hooked!

Bodywork is acceptable for its age, a minor scuff on the rear bumper and scratches all over the passenger door from a dog, but nothing major. No rust that I could see apart from a teeny weeny bit in the door shut on the nearside rear.

Once I'd driven the car and had a good look round, I decided to make an offer. So here she is;








The car came with a custom made exhaust, with some sort of cheap carbon fibre can. It was okay. The previous owner had also had her up on Surrey Rolling Road, with a printout for a healthy 261.7 WHP.

This car seems to have reboosted my love for the modified car scene, I have been away from it for a while! In any case, my ideas for the near future:

(No Particular Order)

Interior

The Usual Gauges - Oil Temp, Pressure and Boost.
Short Shifter
OEM WRX Gear Knob
New Carpets And Mats
Redress The Tired Leather Interior

Exterior

17" Rota Grid Alloy Wheels, Green or Black
Coilovers, Lowered 20mm Over Standard.
Drilled And Grooved Brake Discs
Carbon Front Lip
Carbon Side Skirts
Carbon Wing Mirrors
Debadged Rear Tailgate
Tinted Rear Windows

Engine

Afterburner Raptor Stainless Back Box
Full Afterburner Stainless Exhaust With Sports Cat (Downpipe to Back Box)
Forge Dump Valve
Various Engine Dress Up Items
Carbon Radiator Cooling Plate
Blue Silicone Hoses

This list is non-exhaustive, as I will probably find more ideas/change my mind on a few bits!

Last edited by IBenjieI; 19-01-2018 at 05:28 PM.
Reply With Quote
  #2  
Old 18-01-2018, 05:49 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

So after taking her for a good spin the other day I started to notice a really loud 'Whooshing' sound every time I accelerated and the turbo spooled up, on investigation I noticed the Carbon 'custom' back box had kind of exploded!




Needless to say I needed a replacement sharpish! After a chat with my friend from work (He also drives a Scooby!) he recommended me to check out Scoobyworld and get an Afterburner. So I had a look and decided on an Afterburner Raptor;




It came pretty much the next day and I couldn't wait to set about fitting it!

Removing the old back box wasn't as easy as I'd hoped! I put the car up onto my ramps and crawled underneath. One of the bolts came off no problem! The other was so badly corroded, what used to be a 14mm bolt head, was more like and 11-11.5mm haha.

I was having a nightmare trying to get my sockets and spanners to fit, I even tried to tighten it up to shear the bolt, I even tried a cold chisel and hammer but nothing was shifting it. So I decided to do the one thing I hated doing as it went against all my years of training as an engineer... hammer the **** out of a 10mm socket to fit the head!

It worked and I was able to quickly fit the new back box. I started her up for the first time and what a sound! That classic Scooby burble with a really deep tone to her voice. I love it! Mixed with the whine from the turbo spool up, I love the sound it makes when driving the car! Now I can't wait to have the full system fitted.

A picture paints a thousand words;




Not too loud and just the right amount of noise to be noticed. Also, a very pretty looking 5" slash cut tip!

Last edited by IBenjieI; 19-01-2018 at 04:37 PM.
Reply With Quote
  #3  
Old 18-01-2018, 09:08 PM
scotty's Avatar
scotty scotty is offline
Platinum Member
 
Join Date: Aug 2012
Location: In ma bed
Posts: 5,807
Default

Looks nice i would go with different coilovers like Tein , Eibach , KW wouldnt waste your hard earned money on bc .
__________________
Maintained by Hypertech and Mapped by Andy Forrest

1998 UK Turbo , 1998 Terzo , 1997 JDM Type R the money pit , 2004 black WRX STI Type UK , 2004 blue FSTI
Reply With Quote
  #4  
Old 18-01-2018, 09:14 PM
Banstead Stig's Avatar
Banstead Stig Banstead Stig is offline
Gold Member
 
Join Date: Feb 2012
Location: Banstead
Posts: 2,258
Default

My FSTi was bought in contemplation of starting a family and once our eldest arrived, Mrs Stig got a Blob Wagon, so I can empathise with your approach!

Looks nice and it'll be interesting to see how it develops under your ownership!

Couldn't see "tint windows" on your list... I'd recommend that.
Reply With Quote
  #5  
Old 18-01-2018, 10:52 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by scotty View Post
Looks nice i would go with different coilovers like Tein , Eibach , KW wouldnt waste your hard earned money on bc .
I was contemplating Tein, but I'd need to find a balance between cost/value for money. Cheers for the insight!

Quote:
Originally Posted by Banstead Stig View Post
My FSTi was bought in contemplation of starting a family and once our eldest arrived, Mrs Stig got a Blob Wagon, so I can empathise with your approach!

Looks nice and it'll be interesting to see how it develops under your ownership!

Couldn't see "tint windows" on your list... I'd recommend that.
YES! Tints are a must. I've had them on several cars and it's a saviour when some idiot doesn't dip headlights behind you!

I'm hoping to keep regular updates, all depending on money etc however I have plans over these coming months and hope to have the wheels and coilovers sorted just after the dump valve and gauges... thanks for the like Stig!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #6  
Old 19-01-2018, 09:22 AM
boggissimo's Avatar
boggissimo boggissimo is offline
Bronze Member
 
Join Date: Aug 2015
Location: Kent
Posts: 330
Default

Nice to see another wagon on here, mine was bought for similar reasons. I went with MeisterR coilovers and they are great.

Sent from my Swift 2 X using Tapatalk
__________________
JDM twinscroll Legacy wagon [previously blob WRX/PPP wagon, killed @ Silverstone Feb 2019]
Reply With Quote
  #7  
Old 19-01-2018, 09:34 AM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

we can supply a better quality TEIN c/over or Pedders lowered kit at better value and quality than the BC's.......
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #8  
Old 19-01-2018, 09:39 AM
boggissimo's Avatar
boggissimo boggissimo is offline
Bronze Member
 
Join Date: Aug 2015
Location: Kent
Posts: 330
Default

By the way, since yours is on a 55 plate is it the 2.0 or 2.5 engine?

Sent from my Swift 2 X using Tapatalk
__________________
JDM twinscroll Legacy wagon [previously blob WRX/PPP wagon, killed @ Silverstone Feb 2019]
Reply With Quote
  #9  
Old 19-01-2018, 02:06 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by boggissimo View Post
Nice to see another wagon on here, mine was bought for similar reasons. I went with MeisterR coilovers and they are great.

Sent from my Swift 2 X using Tapatalk

I had MeisterR on my old Honda Civic, fantastic coilovers! The only downside is the cost...
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #10  
Old 19-01-2018, 02:06 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by boggissimo View Post
By the way, since yours is on a 55 plate is it the 2.0 or 2.5 engine?

Sent from my Swift 2 X using Tapatalk


EJ25 engine
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #11  
Old 19-01-2018, 03:18 PM
Red Baron's Avatar
Red Baron Red Baron is online now
Platinum Member
 
Join Date: Sep 2008
Location: St Leonards on Sea
Posts: 2,735
Default

Quote:
Originally Posted by IBenjieI View Post
...just after the dump valve and gauges...
Before you spend a load of money, lots of people have had problems with how the car runs after fitting VTA dump valves, as a minimum you'll probably require a map tweak.

Shane
Reply With Quote
  #12  
Old 19-01-2018, 03:29 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

Coilovers covers what ever you buy! They work perfect !!!
Keeps it all mint , I'd never run coils without them again
Reply With Quote
  #13  
Old 19-01-2018, 03:30 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

Dump valves
Reply With Quote
  #14  
Old 19-01-2018, 04:15 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Haha, people not a fan of dump valves then?
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #15  
Old 19-01-2018, 04:45 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by asperformance View Post
we can supply a better quality TEIN c/over or Pedders lowered kit at better value and quality than the BC's.......
I'll have a browse, thanks

Quote:
Originally Posted by Red Baron View Post
Before you spend a load of money, lots of people have had problems with how the car runs after fitting VTA dump valves, as a minimum you'll probably require a map tweak.

Shane
Hm, I will have to be careful. I will keep the original Recirc valve so if I have any issues will always swap it back in... Thanks for the heads up
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.

Last edited by IBenjieI; 19-01-2018 at 04:48 PM.
Reply With Quote
  #16  
Old 22-01-2018, 11:02 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Update time, bling for the engine bay and the ears!

Don't judge me, I like the noise and it's my first turbo car, let me have my 5 minutes haha




Fitted in around 20 minutes as the recirc pipe was rather difficult to remove, easy to fit the new one. Jubilee clip on the bung and managed to pinch a couple of stainless bolts and spring washers from work as didn't want to put discoloured bolts back onto a shiny new thing!

Quick test run, everything feels good as far as I can tell and sounds awesome!

I still have the old recirc valve so at any time something feels wrong, it goes back on!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #17  
Old 23-01-2018, 08:00 AM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Shiny...
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #18  
Old 23-01-2018, 09:47 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Rdlangy1 View Post
Shiny...


Rest of the bay needs cleaning now...
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #19  
Old 23-01-2018, 12:32 PM
Granby's Avatar
Granby Granby is offline
Gold Member
 
Join Date: Sep 2008
Location: London
Posts: 2,331
Default

Silver wagon, nice
__________________
Not built for the Twisty's
Reply With Quote
  #20  
Old 23-01-2018, 02:03 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Granby View Post
Silver wagon, nice
Thanks buddy! I love it. Ticks all the boxes; fast, plenty of boot space, comfortable drive.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #21  
Old 23-01-2018, 02:07 PM
Granby's Avatar
Granby Granby is offline
Gold Member
 
Join Date: Sep 2008
Location: London
Posts: 2,331
Default

Quote:
Originally Posted by IBenjieI View Post
Thanks buddy! I love it. Ticks all the boxes; fast, plenty of boot space, comfortable drive.
Yeah had cookers, old style TV's etc in the back of my old one
__________________
Not built for the Twisty's
Reply With Quote
  #22  
Old 23-01-2018, 05:13 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Granby View Post
Yeah had cookers, old style TV's etc in the back of my old one
Haha. That's mint.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #23  
Old 24-01-2018, 05:27 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

More shiny bits ordered from Scoobyworld!

Blue Mishimoto Radiator Stays.
Blue Scoobyworld Intercooler/Throttle Body Silicone Hose.
Prosport Triple 52mm Gauge Pack: Oil Temp, Oil Pressure & Boost.

Should be here tomorrow
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #24  
Old 24-01-2018, 05:35 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #25  
Old 24-01-2018, 05:51 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by IBenjieI View Post
Should be here tomorrow
The Mishimoto Radiator Stays are out of stock The rest won't be here until Friday. It's like giving a kid sweets, then taking it away again!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #26  
Old 27-01-2018, 06:37 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Some more shiny's arrived today...



Scoobyworld 52mm Gauge Pod
Prosport Boost Gauge
Prosport Oil Temp Gauge
Prosport Oil Pressure Gauge
Mishimoto Radiator Stays
Oil Pressure/Temp Fitting Kit
Scoobyworld Intercooler To Throttle Body Blue Silicone Hose

Hoping to get around to fitting these tomorrow. Question is for the radiator stays, do I stick with the Black Anodised bolts provided or go stainless M8 bolts?

Also, I'll get a raise of hands for the Scoobyworld gauge pod or an ATI pod I got from SamSTI off these forums...?



Looking forward to some feedback!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.

Last edited by IBenjieI; 27-01-2018 at 07:03 PM.
Reply With Quote
  #27  
Old 27-01-2018, 10:29 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default Project Family Wagon

ATI pod
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #28  
Old 28-01-2018, 01:17 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Rdlangy1 View Post
ATI pod
Cheers Ryan! Thought so myself!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.

Last edited by IBenjieI; 28-01-2018 at 11:12 AM.
Reply With Quote
  #29  
Old 29-01-2018, 07:04 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Yesterday I got round to fitting a boost gauge and ATI/DEFI Gauge Pod. This will be a semi-how to;

*Disclaimer* I will not be held responsible for any mistakes that YOU make whilst carrying out my instructions, this is the way I did mine and it works.

First things first, I cut into the vacuum line coming off the two o'clock position on the dump valve/recirc valve and joined them back together using the T-Piece. I then attached and routed the blue silicone vacuum hose along the clutch vacuum line and secured into position with cable ties and the already mounted hose clamps on the bulkhead/firewall. DO NOT OVER TIGHTEN THE CABLE TIES AS THIS WILL AFFECT THE PRESSURE IN THE LINE.




Once I'd finished routing the vacuum line I cut around 3 inches from the end and placed the inline filter that was provided with the kit, this not only smooths out pulses but it also filters out any nasty contaminants from entering the pressure sender unit.



Once the filter had been fitted I removed the firewall bung just above the turbo, this comes out next to the clutch pedal. You have to remove a tiny bit of the insulation in the cabin but it is already pre-cut for you. I used my Stanley knife to cut an 'X' into the bung big enough to pass the wire and connector through then pushed it back into place in the firewall on the engine side. I then proceeded to feed the sensor wire through the hole and pulled through from within the cabin until I had enough to feed up to where the Gauge Pod sits on the dashboard.




Note in the pictures above if you follow the sensor wire down you will see where the bung is on the firewall. I also at this point mounted the sender unit on the clutch fluid bracket but I may move this at a later date due to hot exhaust gases rising around this point.

Once I was finished mounting and securing everything in the engine bay I popped the plastic surround off just below the steering wheel, I was unsure how to remove it entirely so I only pulled the corner off but this gave me plenty of space to work with.
I also removed the clock and surround from the top of the dashboard, this bit is easy as it is only held in with clips. You might have to use a flat bladed screwdriver to 'persuade' it from it's mount.



When you remove the connector from the back of the clock, take note which wires correspond to what. Its written on the underside of the clock unit so you can't really go wrong but to make things easier I cut the plug off and placed it back into it's socket for a visual aid.

RED - Battery +ve
BLACK - Battery -ve / Earth
ORANGE - Accessory
PURPLE - Lights

These colours are used on my Hawkeye so I presume all new ages but don't quote me. If in doubt, look it up on the net!

Now the connector was removed I stripped the ends of all the wires except the purple 'LIGHTS' wire and used a soldering iron to coat the ends in solder. I decided not to use the Purple wire as I wanted day and night modes on the gauge to be Green, therefore I needed no input from the lights. The instructions that come with your gauges will suggest what wires need to be attached to what.

The instructions suggested the following for Green on both day and night modes;

RED - Battery +ve
BLACK - Battery -ve
White - No Input
Orange - Accessory

After preparing the ends of the clock loom and gauge power harness with solder, I soldered them together using the above chart and used heat shrink to cover the newly made connections. I prefer to use heat shrink as it will never come off unless cut.



Now the power side of things was completed I pulled the sensor wire up through the dash and over the top of the heater ducting, make sure to secure this wire away from the clutch pedal as over time the clutch will chafe through this wire!

I plugged the connectors in to the back of the boost gauge and turned the ignition on to check it was all working, once I was happy I pushed the pod into place and admired my handy work!



Start 'er up!



Note I haven't connected up the oil pressure/temp gauges yet as this is a little harder!

All of this took me roughly 2 hours to complete, I'm a bit of a perfectionist so I secure and route wires properly etc...

You're all clever enough to figure out how to do that bit!

__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.

Last edited by IBenjieI; 29-01-2018 at 07:09 PM.
Reply With Quote
  #30  
Old 29-01-2018, 07:06 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Great guide and looks good
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #31  
Old 29-01-2018, 07:11 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Rdlangy1 View Post
Great guide and looks good
Cheers Ryan

Can copy and paste into the DIY section for others if you like?
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #32  
Old 08-02-2018, 08:55 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

So, it turns out that black ice also affects 4WD!

Hit a patch this morning on the A27 outside Lewes... I'm gutted!





Gutted. Off to the bodyshop this morning for a quote and find out the extent of the damage.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #33  
Old 08-02-2018, 09:06 AM
Red Baron's Avatar
Red Baron Red Baron is online now
Platinum Member
 
Join Date: Sep 2008
Location: St Leonards on Sea
Posts: 2,735
Default

What a shame, hope the bill isn't too scary, if you're not going through insurance there's plenty of breakers out there for the bumpers, light, bonnet and wing and you may even be able to pick them up in the right colour.
I contemplated taking the A27 from Hastings to Crawley this morning rather than risking the cross country route as thought it would be safer, would appear that wasn't the case.
Reply With Quote
  #34  
Old 08-02-2018, 09:08 AM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Ouch!!!
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #35  
Old 08-02-2018, 09:17 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Red Baron View Post
What a shame, hope the bill isn't too scary, if you're not going through insurance there's plenty of breakers out there for the bumpers, light, bonnet and wing and you may even be able to pick them up in the right colour.
I contemplated taking the A27 from Hastings to Crawley this morning rather than risking the cross country route as thought it would be safer, would appear that wasn't the case.
Jap Performance Parts in Crawley would have everything I needed, at least I hope they have Hawkeye's! The only problem is the rear bumper. Mines a Wagon...

It could have been a lot worse, I think it's only cosmetic. I can't see any signs of chassis damage. I'd rather not go through the insurance as I want to keep my 6 years NCB!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #36  
Old 08-02-2018, 10:39 AM
Red Baron's Avatar
Red Baron Red Baron is online now
Platinum Member
 
Join Date: Sep 2008
Location: St Leonards on Sea
Posts: 2,735
Default

JPP aren't the cheapest unfortunately, there's this on eBay

https://rover.ebay.com/rover/0/0/0?m...2F253379994770
Reply With Quote
  #37  
Old 08-02-2018, 10:47 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Red Baron View Post
JPP aren't the cheapest unfortunately, there's this on eBay

https://rover.ebay.com/rover/0/0/0?m...2F253379994770
You sir are a legend.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #38  
Old 08-02-2018, 11:03 AM
Steve_PPP's Avatar
Steve_PPP Steve_PPP is offline
Admin, Meets/Events Organiser
 
Join Date: Sep 2008
Location: Burgess Hill, Sussex
Posts: 13,267
Default

Bugger! It was certainly icy this morning, shame to see you found a bad spot.

Good luck finding parts and getting it fixed. As crazy as it sounds, with that damage front and rear (both bumpers, bonnet, wing and headlamp) I wouldn't be surprised if an insurance company write it off. Hawkeye headlamps are expensive, plus factor in bodyshop /paint and a courtesy car into the claim and it'll push it over the threshold I reckon. Of course its repairable and you could buy it back and put on the road, but then it would be flagged as CatD (or CatN now?) i expect.

Hopefully you can do a deal with a breaker for all the parts
Reply With Quote
  #39  
Old 08-02-2018, 12:02 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Steve_PPP View Post
Bugger! It was certainly icy this morning, shame to see you found a bad spot.

Good luck finding parts and getting it fixed. As crazy as it sounds, with that damage front and rear (both bumpers, bonnet, wing and headlamp) I wouldn't be surprised if an insurance company write it off. Hawkeye headlamps are expensive, plus factor in bodyshop /paint and a courtesy car into the claim and it'll push it over the threshold I reckon. Of course its repairable and you could buy it back and put on the road, but then it would be flagged as CatD (or CatN now?) i expect.

Hopefully you can do a deal with a breaker for all the parts
Parts for a wagon are few and far between, the breaker Baron showed me has everything I need. He's driving a hard bargain but it looks like complete front bumper, rear bumper, both wings, both headlights at £850, he's not willing to split thew wings or headlights... £65 pallet delivery puts me at a remortgage on my house! This is all before labor at fitting the parts and tidying up the rest... Ouchie!

Looks like overtime is in order this year!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #40  
Old 08-02-2018, 01:30 PM
Red Baron's Avatar
Red Baron Red Baron is online now
Platinum Member
 
Join Date: Sep 2008
Location: St Leonards on Sea
Posts: 2,735
Default

Might be worth trying JPP or MB developments, might be able to piece the parts needed together, I'd have thought there would be single Headlights on eBay, not everyone dings the same corner.
Reply With Quote
  #41  
Old 08-02-2018, 02:48 PM
Granby's Avatar
Granby Granby is offline
Gold Member
 
Join Date: Sep 2008
Location: London
Posts: 2,331
Default

Quote:
Originally Posted by IBenjieI View Post
Parts for a wagon are few and far between, the breaker Baron showed me has everything I need. He's driving a hard bargain but it looks like complete front bumper, rear bumper, both wings, both headlights at £850, he's not willing to split thew wings or headlights... £65 pallet delivery puts me at a remortgage on my house! This is all before labor at fitting the parts and tidying up the rest... Ouchie!

Looks like overtime is in order this year!
To be honest that doesn't seem to bad, you can always sell the bits you don't use
__________________
Not built for the Twisty's
Reply With Quote
  #42  
Old 08-02-2018, 02:52 PM
Steve_PPP's Avatar
Steve_PPP Steve_PPP is offline
Admin, Meets/Events Organiser
 
Join Date: Sep 2008
Location: Burgess Hill, Sussex
Posts: 13,267
Default

If that one at the breakers is the same colour code, then i'd jump on the £850 bundle. You'd be spending that again at a half decent bodyshop if it all needed painting...
Reply With Quote
  #43  
Old 08-02-2018, 02:56 PM
Steve_PPP's Avatar
Steve_PPP Steve_PPP is offline
Admin, Meets/Events Organiser
 
Join Date: Sep 2008
Location: Burgess Hill, Sussex
Posts: 13,267
Default

Just noticed you didn't list bonnet in your post, it'd be cheaper to get that off the breaker if he has it too than get a bodyshop to work on yours.

Another consideration - save the £65 pallet delivery and go and collect, even if its a few hours away? Bodywork on a pallet can be easily damaged in transit, i'd rather load a car/van up and pad it out/protect paintwork properly.
Reply With Quote
  #44  
Old 08-02-2018, 02:57 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Quote:
Originally Posted by Steve_PPP View Post
Just noticed you didn't list bonnet in your post, it'd be cheaper to get that off the breaker if he has it too than get a bodyshop to work on yours.

Another consideration - save the £65 pallet delivery and go and collect, even if its a few hours away? Bodywork on a pallet can be easily damaged in transit, i'd rather load a car/van up and pad it out/protect paintwork properly.


Wise words
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #45  
Old 08-02-2018, 03:57 PM
georgehawkins27's Avatar
georgehawkins27 georgehawkins27 is offline
Bronze Member
 
Join Date: Oct 2017
Location: Cambridge
Posts: 172
Default

Look at Johnson's accident repair in Burgess Hill area. He'll give you a free quote.

He's fixed a lot worse for me and my dad before, and he's very reasonable and fantastic job too.

Sent from my E5823 using Tapatalk
Reply With Quote
  #46  
Old 08-02-2018, 05:21 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Jumped on the £850 as it's all in same colour. It would probably cost more than the pallet delivery to hire a van and drive up there so that's sorted now. As for the bonnet, that's getting straightened out by a guy my next door neighbour knows, he owns a body shop. This has been an expensive and **** day!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #47  
Old 08-02-2018, 05:31 PM
Bolesroor's Avatar
Bolesroor Bolesroor is offline
Platinum Member
 
Join Date: May 2010
Location: Kent
Posts: 3,168
Default

Ouch!

Glad you are getting it sorted, it was slippery around Dartford this morning at 06:30 but I'm blaming the Toyo ' s on my wagon
Reply With Quote
  #48  
Old 08-02-2018, 06:16 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Bolesroor View Post
Ouch!

Glad you are getting it sorted, it was slippery around Dartford this morning at 06:30 but I'm blaming the Toyo ' s on my wagon
I am and I'll be glad when this is behind me, this is just eating into my coilovers and wheels money!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #49  
Old 08-02-2018, 06:38 PM
NL03Scooby's Avatar
NL03Scooby NL03Scooby is offline
Moderator
 
Join Date: Jul 2014
Location: Heathfield
Posts: 1,770
Default

Such a shame, especially when it comes out of the blue on an icy morning. I hope you get everything fixed up easily and as pain free as possible.
Reply With Quote
  #50  
Old 08-02-2018, 08:46 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by NL03Scooby View Post
Such a shame, especially when it comes out of the blue on an icy morning. I hope you get everything fixed up easily and as pain free as possible.
Thanks Rob. The parts are bought now, luckily Baron found a breaker on eBay for me. He had a whole Silver Wagon for spares. I just hope they arrive soon as I hate the waiting game! Just want it back on the road asap.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools



All times are GMT +1. The time now is 08:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.