|
|
#1
09-02-2009, 10:01 PM
|
|||
|
|||
brake disc size`s on a sti v3
ive been looking at some new disc`s for the motor, now i have measured my disc "woof woof" they are 277mm
 with 4pot`s. on ebay there are two sizes of discs both that fit the 4pot`s 277mm & 294mm it may be wishfull thinking but could i up size to the  294mm disc`s strait swap or would i need to space the calipers out a bit??? can it be done many thanks.....  was told by jay @j.p.p`s will fit but would need to buy newage pads ???? mind you they have given me wrong info on a dump valve they sold me befor so ????? any advice please 
__________________
 365bhp/ 345ftlbs api built and pat h. map 
|
|
#2
10-02-2009, 07:44 PM
|
||||
|
||||
|
Re: brake disc size`s on a sti v3
Wasn't aware that the STi 3 came with 4-pots, I am now
 Easiest way to check caliper clearance would be to measure the gap between the top edge of the disk and the caliper. The caliper normally sits quite close to the disk. You would need at least 8.5mm clearance to get the 294mm disk on and then suitable 99> pads in the calipers.
|
|
#3
10-02-2009, 09:12 PM
|
|||
|
|||
|
Re: brake disc size`s on a sti v3
I thought it was the sti4 that had the 4 pots, i know my brothers sti3 had the very ****e 2 pots on.
|
|
#5
10-02-2009, 10:01 PM
|
|||
|
|||
|
Re: brake disc size`s on a sti v3
Quote:
|
|
#6
10-02-2009, 11:54 PM
|
|||
|
|||
|
Re: brake disc size`s on a sti v3
[img]http://i328.photobucket.com/albums/l355/stig_this/DSC00682.jpg[/img]
there is quite a gap between disc n caliper ??? as you can see in photo. lol @ sti v3/4 = mix n match nice 
__________________
365bhp/ 345ftlbs api built and pat h. map
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
