South East Scoobies  

Go Back   South East Scoobies > The Showroom > Projects
Reload this Page FMIC Works in progress
FAQ Calendar

Projects Tell us about your cars mods, past, present and future!

Reply
Page 1 of 2 1 2
 
Thread Tools
  #1  
Old 03-01-2009, 09:53 PM
Crowman
Guest
  
Posts: n/a
Default FMIC Works in progress








After a clean and a bit of paint.
Last edited by C. J.; 28-08-2009 at 07:43 PM.
Reply With Quote
  #2  
Old 03-01-2009, 10:07 PM
DukeBoy DukeBoy is offline
Gold Member
  
Join Date: Sep 2008
Location: Burgess Hill
Posts: 2,079
Default Re: FMIC Works in progress
Very nice so far....looks pi$$ed though only joking
Reply With Quote
  #3  
Old 03-01-2009, 10:09 PM
lady-turbo-wrx's Avatar
lady-turbo-wrx lady-turbo-wrx is offline
Silver Member
  
Join Date: Nov 2008
Location: Kent
Posts: 869
Default Re: FMIC Works in progress
looking good

trace..x
Reply With Quote
  #4  
Old 04-01-2009, 08:43 AM
worzel
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Getting there fella!
Reply With Quote
  #5  
Old 04-01-2009, 10:36 AM
omen46 omen46 is offline
Bronze Member
  
Join Date: Dec 2008
Location: eastry
Posts: 222
Default Re: FMIC Works in progress
oooooooooooo very nice!!! i like it alot!! lol
Reply With Quote
  #6  
Old 04-01-2009, 11:45 AM
2-jaffacake-tone's Avatar
2-jaffacake-tone 2-jaffacake-tone is offline
Gold Member
  
Join Date: Sep 2008
Location: hastings
Posts: 1,810
Default Re: FMIC Works in progress
looking good have you started to hack at the bumper yet. dont for get to put your servo pipe back on
__________________
all over it jaffa style!!!
Reply With Quote
  #7  
Old 04-01-2009, 06:12 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Time to take the wing off to make it easier to make a nice neat job of cutting the hole in inner wing.
I used a starret cutter, then filed down sharp edges.Just needs some edging strip to finish it.



Intercooler hose in place, A bit of white smootherite around the hole edges to stop the rust



The pille of bits are growing,going to weigh all at end of job.



Intercooler and pipework finished, appart from the Mikalr clamps,As yet to arrive.



Tone
I have ordered a load of blue silicon pipes/hoses for vacumn and water pipes.

I have now relocated the ABS pump electrics,there is plenty of cable on the two main looms, but one power feed needs extending,easy job as it has a ring terminal on the end.
I moved the electrics forward by about 1 1/2 inches, just needto make a little plate to attach to the exisiting bracket.
So in the end not a drama as i thought it would be.
Will put some pics up once finished.
Last edited by C. J.; 28-08-2009 at 07:43 PM.
Reply With Quote
  #8  
Old 05-01-2009, 05:31 PM
majorscooby majorscooby is offline
Platinum Member
  
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default Re: FMIC Works in progress
Good job fella, wish i had the balls to strip me car and cut holes in it.
__________________
Cooper man!!!!!
Reply With Quote
  #9  
Old 05-01-2009, 05:50 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by majorscooby
Good job fella, wish i had the balls to strip me car and cut holes in it.
I got to say its a little worrying when you start cutting holes.
My brother CrowSti came around to assist in hole cutting, he was a very good panel beater/sprayer for some years.

So far the biggest pain has been the number of bolts that have sheared off due to not being moved for years.
Having to drill them out and re-tap the thread.
Reply With Quote
  #10  
Old 05-01-2009, 06:30 PM
majorscooby majorscooby is offline
Platinum Member
  
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default Re: FMIC Works in progress
Quote:
Originally Posted by Crowman
Quote:
Originally Posted by majorscooby
Good job fella, wish i had the balls to strip me car and cut holes in it.
I got to say its a little worrying when you start cutting holes.
My brother CrowSti came around to assist in hole cutting, he was a very good panel beater/sprayer for some years.

So far the biggest pain has been the number of bolts that have sheared off due to not being moved for years.
Having to drill them out and re-tap the thread.
Maybe oneday ill do it and have ago but ive only had my car a year so its kinda hard modding somthing so new to me!
__________________
Cooper man!!!!!
Reply With Quote
  #11  
Old 06-01-2009, 08:36 PM
pirate pirate is offline
Regular User
  
Join Date: Jan 2009
Location: westhumble
Posts: 55
Default Re: FMIC Works in progress
looks good is it an ap, fitted one to my eldest girls made a huge difference, i found that you have to cut a fair bit out the inner wing also for the hybrid make, i fit split pipe round the edge just in case it rubs enywhere.
Reply With Quote
  #12  
Old 06-01-2009, 10:07 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by pirate
looks good is it an ap, fitted one to my eldest girls made a huge difference, i found that you have to cut a fair bit out the inner wing also for the hybrid make, i fit split pipe round the edge just in case it rubs enywhere.
Have you any pics of your eldests FMIC, was it on a classic scoob?
Reply With Quote
  #13  
Old 06-01-2009, 10:11 PM
midlife2 midlife2 is offline
Silver Member
  
Join Date: Sep 2008
Location: Eastbourne
Posts: 1,015
Default Re: FMIC Works in progress
I have fitted a fmic to my classic if you need any pics
Reply With Quote
  #14  
Old 06-01-2009, 10:39 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by midlife2
I have fitted a fmic to my classic if you need any pics
Yes that would be great, Thanks
Reply With Quote
  #15  
Old 06-01-2009, 10:45 PM
midlife2 midlife2 is offline
Silver Member
  
Join Date: Sep 2008
Location: Eastbourne
Posts: 1,015
Default Re: FMIC Works in progress
What pics do u need always pop round im in Eastbourne
Reply With Quote
  #16  
Old 06-01-2009, 10:50 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by midlife2
What pics do u need always pop round im in Eastbourne
Have you got any pics of engine bay shots, during installtion and finished, i am interested to see how other people have plumbed there's.any pics at all really mate.
And i would like to take you up on your offer, may be over week end if your about i could pop down.

Thanks
Reply With Quote
  #17  
Old 07-01-2009, 12:48 PM
pirate pirate is offline
Regular User
  
Join Date: Jan 2009
Location: westhumble
Posts: 55
Default Re: FMIC Works in progress
have pics of big ap with all silicon pipes and a hybred with blue anodized pipes that ive fitted can do that easy but can i work out how to upload pics ? just getting old i think
Reply With Quote
  #18  
Old 07-01-2009, 04:12 PM
RobVXD RobVXD is offline
Bronze Member
  
Join Date: Sep 2008
Location: Commuting somewhere between West Sussex and New Malden...
Posts: 198
Default Re: FMIC Works in progress
Have a look at StevieP's project thread over on Surrey for photo's...

http://www.surreyscoobies.co.uk/forums/ ... hp?t=22042
__________________
Mourning the loss of Ayrton Senna da Silva, March 21 1960 – May 1 1994, Gone but not forgotten.
Last edited by C. J.; 28-08-2009 at 07:44 PM.
Reply With Quote
  #19  
Old 07-01-2009, 07:07 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by RobVXD
Have a look at StevieP's project thread over on Surrey for photo's...

http://www.surreyscoobies.co.uk/forums/ ... hp?t=22042
Thanks for the offers guys.
Rob
Spot on , just what i wanted, was interested to see a few bits related to dump valve and general plumbing.

Thanks
Last edited by C. J.; 28-08-2009 at 07:44 PM.
Reply With Quote
  #20  
Old 26-02-2009, 11:42 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Picked up these today, freshly painted, ready to get back on car

Last edited by C. J.; 28-08-2009 at 07:44 PM.
Reply With Quote
  #21  
Old 27-02-2009, 12:16 AM
BIG"E"'s Avatar
BIG"E" BIG"E" is offline
Events / Ring Trip Organiser
  
Join Date: Sep 2008
Location: Hastings
Posts: 8,903
Default Re: FMIC Works in progress
Thats a posh garage!!!

Did you run out of CARPET.
__________________
Keep it on the black stuff and leave the pit boards alone
Reply With Quote
  #22  
Old 27-02-2009, 07:09 AM
majorscooby majorscooby is offline
Platinum Member
  
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default Re: FMIC Works in progress
roll out the red carpet for your spangley new parts!
__________________
Cooper man!!!!!
Reply With Quote
  #23  
Old 28-02-2009, 12:06 AM
2-jaffacake-tone's Avatar
2-jaffacake-tone 2-jaffacake-tone is offline
Gold Member
  
Join Date: Sep 2008
Location: hastings
Posts: 1,810
Default Re: FMIC Works in progress
very nice mate
__________________
all over it jaffa style!!!
Reply With Quote
  #24  
Old 28-02-2009, 07:50 AM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by BIG E
Thats a posh garage!!!

Did you run out of CARPET.
Its a rug, young man.
In one of mums spare rooms,she has loads of space,and i am doing the scoob at mummys house,as loads of room and coffee & biscuits on tap. Bless her.
Reply With Quote
  #25  
Old 28-02-2009, 11:40 AM
majorscooby majorscooby is offline
Platinum Member
  
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default Re: FMIC Works in progress
Quote:
Originally Posted by Crowman
Quote:
Originally Posted by BIG E
Thats a posh garage!!!

Did you run out of CARPET.
Its a rug, young man.
In one of mums spare rooms,she has loads of space,and i am doing the scoob at mummys house,as loads of room and coffee & biscuits on tap. Bless her.
Quality excuse!! If i ever do anything to my car its off to mar and pars for free grub!!!
__________________
Cooper man!!!!!
Reply With Quote
  #26  
Old 28-02-2009, 07:35 PM
worzel
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
I saw it in the flesh today. Man, what a cracking job he's done.

Fancy a crack at a newage one mate
Reply With Quote
  #27  
Old 01-03-2009, 04:28 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Todays up date.

Intercooler finally all connected back up.
Headers & Downpipe back on - Had to have the flange on the headers skimmed as it was slightly concave causing a blow.
Induction kit fitted
Something i was not expecting was that one of rad cooling fans strikes the intercooler pipework,had to remove fan and shave about 4 mm off the outer edge of each blade.
Just a few of the pipes to change now, Boost pipe to air box is too short to reach induction kit, expansion tank hoses are going to be replaced with samco to match the others and vacumn hose is too short.

Remaining jobs are:
Cam belt kit
Replace rear drop links
Change all oils
Trip to power station
JOB DONE

Oh and not forgetting injectors,Power FC and mapping by Scott





Last edited by C. J.; 28-08-2009 at 07:44 PM.
Reply With Quote
  #28  
Old 01-03-2009, 04:51 PM
DukeBoy DukeBoy is offline
Gold Member
  
Join Date: Sep 2008
Location: Burgess Hill
Posts: 2,079
Default Re: FMIC Works in progress
Looking good

Thought it would be all done by now
Reply With Quote
  #29  
Old 01-03-2009, 04:56 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by DukeBoy
Looking good

Thought it would be all done by now
So did i mate.
Reply With Quote
  #30  
Old 01-03-2009, 05:21 PM
C. J.'s Avatar
C. J. C. J. is offline
Platinum Member
  
Join Date: Sep 2008
Location: Horsham
Posts: 5,081
Default Re: FMIC Works in progress
your moving forward thats the main thing
__________________
Eat, Sleep, Race , Repeat
Reply With Quote
  #31  
Old 01-03-2009, 05:26 PM
2-jaffacake-tone's Avatar
2-jaffacake-tone 2-jaffacake-tone is offline
Gold Member
  
Join Date: Sep 2008
Location: hastings
Posts: 1,810
Default Re: FMIC Works in progress
could just be the pic put in the 1st pic. the fmic pipe going into the intercooler looks very close to the front pannel. did you have do trim any of the front pannel? i think i had to on mine.

looks good mate
__________________
all over it jaffa style!!!
Reply With Quote
  #32  
Old 01-03-2009, 06:19 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by 2-jaffacake-tone
could just be the pic put in the 1st pic. the fmic pipe going into the intercooler looks very close to the front pannel. did you have do trim any of the front pannel? i think i had to on mine.

looks good mate
Yes mate its very close, just about 2mm clearance.
I did trim a fair bit off both sides,one prob i had was that i am using the Mikalor Supra hose clamps and they are so bulky that you have to position them just right so they dont foul the bumper anywhere.
Mind you the clamps are top quality.
Reply With Quote
  #33  
Old 01-03-2009, 08:00 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default Re: FMIC Works in progress
AAARRRRHHHHHH !!! it's got a Dawes valve on it....Yukkie, Yukkie Yuk Yuk......

Does the bonnet shut with those hose clips on the throttle body that way round.
I wouldn't slam the bonnet just yet......
Reply With Quote
  #34  
Old 01-03-2009, 08:33 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by SilverSurfer
AAARRRRHHHHHH !!! it's got a Dawes valve on it....Yukkie, Yukkie Yuk Yuk......

Does the bonnet shut with those hose clips on the throttle body that way round.
I wouldn't slam the bonnet just yet......
Sorry mate, only boost control i got. Nasty way of doing it.
Hey and just to go the whole hog i fitted an HKS FCD and AFR.
Been like it for 5yrs or so.
Not for much longer though.

Have shut bonnet and is fine
Reply With Quote
  #35  
Old 07-03-2009, 04:50 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Striped down for cam belt kit - It was replaced when i got car 7 yrs ago
Need crank shaft oil seal by looks of it.






Last edited by C. J.; 28-08-2009 at 07:44 PM.
Reply With Quote
  #36  
Old 16-03-2009, 07:13 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
I decided to do the cambelt myself,Replaced all idlers ,tensioners,crank shaft oil seal,Alternator and air con belts.
Have done many a twin can cam belt, but this was 1st flat four, bit of a bitch,after taking the belt off and putting back on for about the 5th time, i got it spot on.
Turned the key for 1st time since November.

All sounds sweet, not driven yet as got to now polish it up and fit all panels







Last edited by C. J.; 28-08-2009 at 07:44 PM.
Reply With Quote
  #37  
Old 16-03-2009, 07:16 PM
DukeBoy DukeBoy is offline
Gold Member
  
Join Date: Sep 2008
Location: Burgess Hill
Posts: 2,079
Default Re: FMIC Works in progress
Looking good.....now get a move on
Reply With Quote
  #38  
Old 16-03-2009, 07:59 PM
majorscooby majorscooby is offline
Platinum Member
  
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default Re: FMIC Works in progress
Mate im getting more excited than you probaly are!!! Looks a beasty, cant wait to see it running to germany.

You was talking of a spray job for whole car, before or after nurburg???
__________________
Cooper man!!!!!
Reply With Quote
  #39  
Old 16-03-2009, 08:06 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by majorscooby
Mate im getting more excited than you probaly are!!! Looks a beasty, cant wait to see it running to germany.

You was talking of a spray job for whole car, before or after nurburg???
It may get the wheels done before Germany, but its cost me a small fortune in last 4 months, time to ease up on the spending. Prob bend it in half on the ring
Reply With Quote
  #40  
Old 16-03-2009, 08:16 PM
majorscooby majorscooby is offline
Platinum Member
  
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default Re: FMIC Works in progress
Quote:
Originally Posted by Crowman
Quote:
Originally Posted by majorscooby
Mate im getting more excited than you probaly are!!! Looks a beasty, cant wait to see it running to germany.

You was talking of a spray job for whole car, before or after nurburg???
It may get the wheels done before Germany, but its cost me a small fortune in last 4 months, time to ease up on the spending. Prob bend it in half on the ring
Dont joke about that fella not funny!!!!! good point about the spending, gotta save money for many a frothy bevy and a ring taxi!!!!
__________________
Cooper man!!!!!
Reply With Quote
  #41  
Old 16-03-2009, 09:22 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
  
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default Re: FMIC Works in progress
Looking good Martyn...
Reply With Quote
  #42  
Old 16-03-2009, 09:42 PM
worzel
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
At least the old girl has sparked into life mate.
Reply With Quote
  #43  
Old 17-03-2009, 06:04 PM
Nige
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Glad it all started & sounded good mate. Hmmm i wonder if i could do a t belt.
Reply With Quote
  #44  
Old 17-03-2009, 09:18 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Doing belt for 1st time is just one of those things, you certainly learn after you keep putting the belt on and off.
I kept getting one pulley just one bloomin tooth out, very frustrating.
The trick is to gently hold the belt on one pulley with a clamp then work away from that pulley.
You aslo need a good wide vice to squeeze the tensioner back up.
Toughest bit was getting the bloomin crank pulley off to get access to the oil seal.
Just seemed silly not to do water pump,thermostat and oil seal whilst it was appart.
The belt i took off was nearly 7 years old but looked perfect, mind you had only done about 30k if that.
Reply With Quote
  #45  
Old 18-03-2009, 10:09 AM
worzel
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
I can't wait to see it on the road mate. I doubt that I would catch it though!
Reply With Quote
  #46  
Old 21-03-2009, 04:54 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Well a little update, pretty boring but was time to clean up, T Cut,Polish and refit panels.

Side Skirts - Before





After a clean and new gromets



T-Cut and Polish





Freshly painted skirts fitted











Bonnet before T-Cut and polish



Bonnet with freshly painted scoop




By the time i have finished you will all be extremely bored
Last edited by C. J.; 28-08-2009 at 07:43 PM.
Reply With Quote
  #47  
Old 21-03-2009, 05:02 PM
majorscooby majorscooby is offline
Platinum Member
  
Join Date: Dec 2008
Location: gravesend, kent
Posts: 3,298
Default Re: FMIC Works in progress
Bored? no way its good to see it coming together.
__________________
Cooper man!!!!!
Reply With Quote
  #48  
Old 21-03-2009, 08:26 PM
DukeBoy DukeBoy is offline
Gold Member
  
Join Date: Sep 2008
Location: Burgess Hill
Posts: 2,079
Default Re: FMIC Works in progress
Whats the colour match like?
Reply With Quote
  #49  
Old 21-03-2009, 09:03 PM
Crowman
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Quote:
Originally Posted by DukeBoy
Whats the colour match like?
Was a bit worried at first as the freshly painted panels are very white, however after some hard work with the cutting compound all looks good.I have one wing that is yellowish, but always has been.
I think the bumper should match ok,once i finished cutting the whole car i will stick pics up.
The side skirts match well.
Reply With Quote
  #50  
Old 22-03-2009, 04:51 PM
Nige
Guest
  
Posts: n/a
Default Re: FMIC Works in progress
Looking good mate
Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 12:11 PM.

Contact Us - SouthEastScoobies - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.