South East Scoobies  

Go Back   South East Scoobies > The Garage > Chassis Tuning

Chassis Tuning It's All About The Twisties

Reply
 
Thread Tools
  #1  
Old 02-03-2019, 01:45 PM
ScoobyNib ScoobyNib is offline
Regular User
 
Join Date: Jan 2018
Location: Sussex
Posts: 67
Default Widetrack Geometry

Hello everyone,

Thinking of taking my car down to Abbey Motorsport for a proper alignment/geometry set up but can't seem to find a set of geometry settings online. There's a lot of advice knocking around for STI Blobs but no mention of the supposedly revised set up the Widetrack got from factory?

***EDIT***

Found the info, please see below:


For a DCCD car:

Front Camber (make sure it's equal side to side)

Minimum -1° 10’ Preferred -1° 15’ "Track" -1° 20’ / -1° 30’

Front Toe-in (Total) Minimum 0° 02’ Preferred 0° 06’ Maximum 0° 10’

Front Caster Standard Subaru (more is good)

Rear Camber Standard Subaru (make equal side to side if at all possible)

Rear Toe-in (Total) Minimum 0° 06’ Preferred 0° 10’ Maximum 0° 14’

Thrust angle Minimum -0° 01’ Preferred 0° 00’ Maximum 0° 01’

Non DCCD car is the same except:

Front Toe-in (Total) Minimum 0° 00’ Preferred 0° 01’ Maximum 0° 03’

Rear Toe-in (Total) Minimum 0° 02’ Preferred 0° 6’ Maximum 0° 10’

Last edited by ScoobyNib; 03-03-2019 at 07:32 PM.
Reply With Quote
  #2  
Old 07-03-2019, 11:32 AM
Ginola's Avatar
Ginola Ginola is offline
Moderator
 
Join Date: Mar 2011
Location: Steyning
Posts: 4,231
Default

I would run a bunch more camber than that, the above look like prodrive settings.



Try to keep slight amount of toe on front (really little) and even less on rear like 0.06 front and 0.03 or 2 on rear (which goes hand in hand with the above)

Camber around 1.6 or more on front and around half a degree less on the back.

before going to alignment I would try and extract as much castor as possible.



I currently use 2 deg of camber on the front and 1.6 on the rear, but that's fairly aggressive, (I still get even tyre wear with this but don't do a lot of long journeys)
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #3  
Old 07-03-2019, 12:58 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

i could do with some settings too,
i run a ALK and whiteline caster top mounts so hoping this is a nice amount of caster.
Reply With Quote
  #4  
Old 07-03-2019, 08:11 PM
BIG"E"'s Avatar
BIG"E" BIG"E" is offline
Events / Ring Trip Organiser
 
Join Date: Sep 2008
Location: Hastings
Posts: 8,901
Default

I was given this from Matt Clark (from RCM)

Standard WR1
Front Camber - 1.15
Front Toe - 0.06 in
Rear Toe - 0.10 in

Fast Road / Ring trip
Front Camber - 1.80 - 2.00 (you may struggle to get 2.00)
Front Toe - 1 - 2mm in
Rear Toe - 1 - 2mm in

Rear Camber - 1.5
__________________
Keep it on the black stuff and leave the pit boards alone
Reply With Quote
  #5  
Old 08-03-2019, 07:31 PM
Ginola's Avatar
Ginola Ginola is offline
Moderator
 
Join Date: Mar 2011
Location: Steyning
Posts: 4,231
Default

Quote:
Originally Posted by BIG"E" View Post
I was given this from Matt Clark (from RCM)

Standard WR1
Front Camber - 1.15
Front Toe - 0.06 in
Rear Toe - 0.10 in

Fast Road / Ring trip
Front Camber - 1.80 - 2.00 (you may struggle to get 2.00)
Front Toe - 1 - 2mm in
Rear Toe - 1 - 2mm in

Rear Camber - 1.5

spot on, tho I'd go with less toe
__________________
Somewhere drinking Coffee

Mapped and maintained by FBTuning 07595 493581.
Reply With Quote
  #6  
Old 09-03-2019, 09:42 AM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

So for fast road.
Front camber -1.8
Front toe -1mm
Caster I have the kca335 top mounts set to max angle and I belive the anti lift kit adds some too.

Rear camber -1.5
Rear toe -1mm
Reply With Quote
  #7  
Old 09-03-2019, 04:56 PM
ScoobyNib ScoobyNib is offline
Regular User
 
Join Date: Jan 2018
Location: Sussex
Posts: 67
Default

Thanks for the advice all, I do circa 20k miles a year with the odd track day so fast road setup would be preferable.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools



All times are GMT +1. The time now is 08:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.