South East Scoobies  

Go Back   South East Scoobies > The Garage > General Mechanics > Car DIY walk throughs

Reply
 
Thread Tools
  #1  
Old 28-04-2011, 09:42 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default DIY - 15 Min De-Cat (Newage)

How to save £70-£100 (new price of decat link pipe), DIY De-Cat of 2nd Cat

Tools :
Big Hammer
Large Screwdriver
Large Bar (Trolley Jack Handle)
Pliers
Mask (optional, but recomended due to dust)

Quite a simple job if you know how to swing a hammer......

Cat starts to break up, after several blows of the Hammer on a large screwdriver or trolly jack handle inerted into the cat pipe.
Dust particles and small fragments of cat fall out :



Look inside, you can see the Cat breaking up.....



A few more blow and it all starts to fall out
Pliers will be needed to hook out the metal straps and wire mesh that originally held the Cat together.



All done.....completley empty canister


Last edited by Scott.T; 28-04-2011 at 09:44 PM.
Reply With Quote
  #2  
Old 28-04-2011, 10:07 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

puka, any difference in sound, with the empty square section would that act as resinator making the note louder??
Reply With Quote
  #3  
Old 28-04-2011, 10:11 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

Quote:
Originally Posted by scooby doo View Post
puka, any difference in sound, with the empty square section would that act as resinator making the note louder??
Not fitted it yet.
It will get louder as the Cat acts as a silencer.
Reply With Quote
  #4  
Old 28-04-2011, 10:16 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

should sound really nice with your new rear box, im pretty sure i saw your car parked up by the side of the park the other day??
Reply With Quote
  #5  
Old 28-04-2011, 10:19 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

Quote:
Originally Posted by scooby doo View Post
should sound really nice with your new rear box, im pretty sure i saw your car parked up by the side of the park the other day??
Yep took it down there for a picnic last weekend.
Reply With Quote
  #6  
Old 28-04-2011, 10:21 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

looked geat. and was a perfect day for a picnic,
Reply With Quote
  #7  
Old 29-04-2011, 10:47 AM
ralliart didz's Avatar
ralliart didz ralliart didz is offline
Gold Member
 
Join Date: Aug 2009
Location: outside
Posts: 1,812
Default

nice 1 silversurfer,you could of done this a couple of weeks ago as i just paid £50 for decat pipe. lol
Reply With Quote
  #8  
Old 06-05-2011, 08:01 PM
AWD_Scott's Avatar
AWD_Scott AWD_Scott is offline
Regular User
 
Join Date: May 2011
Location: Hove
Posts: 47
Default

Simple de-cat, but what are you gonna do come MOT time?
Reply With Quote
  #9  
Old 06-05-2011, 08:50 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

Quote:
Originally Posted by AWD_Scott View Post
Simple de-cat, but what are you gonna do come MOT time?
Still has main cat In downpipe.
Reply With Quote
  #10  
Old 06-05-2011, 10:15 PM
AWD_Scott's Avatar
AWD_Scott AWD_Scott is offline
Regular User
 
Join Date: May 2011
Location: Hove
Posts: 47
Default

Ah, but emissions may still be an issue but i guess that'd be upto your mot'r
Reply With Quote
  #11  
Old 06-05-2011, 10:35 PM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

Quote:
Originally Posted by AWD_Scott View Post
Ah, but emissions may still be an issue
Nope they PASS the MOT test with just one cat.
Alot of people remove the large cat in the DP as this is the most restricitve. If they want to go full decat then also remove the above centre cat, then refit the centre cat only for the MOT. But you run the riskof a roadside VOSA test failing with both cats out.
Reply With Quote
  #12  
Old 07-05-2011, 10:32 AM
asperformance asperformance is offline
Authorised Trader
 
Join Date: Oct 2010
Location: the frozen north
Posts: 1,478
Default

only things of note, i'm not sure i'd be too keen on the dust that comes out of them - hazardous or not its an awful job to do and not one i will ever repeat
also, you now have a large cavity rather than a straight thro' pipe so not certain what that would do to exhaust flow but cant be good??
__________________

ASPerformance 0191-4103770
PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS
online shop!!
Reply With Quote
  #13  
Old 07-05-2011, 10:43 AM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,057
Default

So do we need a remap after doing this scott? It will be interesting to see what difference it makes to the sound and performance. Now, where did I put that hammer..................
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S
Reply With Quote
  #14  
Old 07-05-2011, 10:53 PM
Jolly Green Monster Jolly Green Monster is offline
Rest in peace Simon.
 
Join Date: Sep 2008
Location: Maidstone
Posts: 1,104
Default

straight pipe would get much better flow..

Lucky,

if the car is standard and on standard map then you could get away with removing this cat.. if the car mapped already with this cat fitted then it would need an adjustment as it is finely tuned already to suit the current setup.

Simon
__________________
Jolly Green Monster Limited
Full time mapper and Ecu Expert - EcuTek 99 to 2010, ESL 93 to 96, Apexi, Motec, Autronic, Link, GEMs, Simtek, Solaris/Syvecs remaps

www.JollyGreenMonster.co.uk

Please follow of Facebook http://www.facebook.com/pages/Jolly-...26125404073166
Reply With Quote
  #15  
Old 08-05-2011, 12:20 AM
Scott.T's Avatar
Scott.T Scott.T is offline
Admin, Meets/Events Organiser.... formerly known as SilverSurfer
 
Join Date: Sep 2008
Location: Hastings, East Sussex
Posts: 9,483
Default

Agree with all of the above, at the end of the day its free so worth a shot. A lot of other car marque/forum have been doing this sort of thing for year us scooby owners never take the cheap option, so I thought I'd buck the trend.
Reply With Quote
  #16  
Old 08-05-2011, 12:22 AM
Jolly Green Monster Jolly Green Monster is offline
Rest in peace Simon.
 
Join Date: Sep 2008
Location: Maidstone
Posts: 1,104
Default

well it probably has to be better than the cat

in fact I think I have a decat pipe in the garage.. you could compare
__________________
Jolly Green Monster Limited
Full time mapper and Ecu Expert - EcuTek 99 to 2010, ESL 93 to 96, Apexi, Motec, Autronic, Link, GEMs, Simtek, Solaris/Syvecs remaps

www.JollyGreenMonster.co.uk

Please follow of Facebook http://www.facebook.com/pages/Jolly-...26125404073166
Reply With Quote
  #17  
Old 08-05-2011, 11:06 AM
AndySpecD AndySpecD is offline
Bronze Member
 
Join Date: Aug 2010
Location: Surrey
Posts: 125
Default

Good effort, but I thought scrap value for an old cat was around £50 (why some go missing off cars overnight), so why not scrap the cat and buy a 2nd hand decat for £50?
Reply With Quote
  #18  
Old 08-05-2011, 11:18 AM
Jolly Green Monster Jolly Green Monster is offline
Rest in peace Simon.
 
Join Date: Sep 2008
Location: Maidstone
Posts: 1,104
Default

Good call
__________________
Jolly Green Monster Limited
Full time mapper and Ecu Expert - EcuTek 99 to 2010, ESL 93 to 96, Apexi, Motec, Autronic, Link, GEMs, Simtek, Solaris/Syvecs remaps

www.JollyGreenMonster.co.uk

Please follow of Facebook http://www.facebook.com/pages/Jolly-...26125404073166
Reply With Quote
  #19  
Old 09-05-2011, 09:13 PM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,057
Default

Quote:
Originally Posted by Jolly Green Monster View Post
straight pipe would get much better flow..

Lucky,

if the car is standard and on standard map then you could get away with removing this cat.. if the car mapped already with this cat fitted then it would need an adjustment as it is finely tuned already to suit the current setup.

Simon

Cheers Simon, well obviously will need a tweak then. As I said, I need to book it in with you again as its got a bit of a hesitation when pulling hard in 3rd and 4th.
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S
Reply With Quote
  #20  
Old 09-05-2011, 09:32 PM
Jolly Green Monster Jolly Green Monster is offline
Rest in peace Simon.
 
Join Date: Sep 2008
Location: Maidstone
Posts: 1,104
Default

Quote:
Originally Posted by Lucky View Post
Cheers Simon, well obviously will need a tweak then. As I said, I need to book it in with you again as its got a bit of a hesitation when pulling hard in 3rd and 4th.
if that is something it has only recently started doing? then it is most likely plugs or something along those lines as I presume it hasnt done it up until now? must be 18months or more ago we mapped it?

Happy to look regardless
__________________
Jolly Green Monster Limited
Full time mapper and Ecu Expert - EcuTek 99 to 2010, ESL 93 to 96, Apexi, Motec, Autronic, Link, GEMs, Simtek, Solaris/Syvecs remaps

www.JollyGreenMonster.co.uk

Please follow of Facebook http://www.facebook.com/pages/Jolly-...26125404073166
Reply With Quote
  #21  
Old 09-05-2011, 09:52 PM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,057
Default

Quote:
Originally Posted by Jolly Green Monster View Post
if that is something it has only recently started doing? then it is most likely plugs or something along those lines as I presume it hasnt done it up until now? must be 18months or more ago we mapped it?

Happy to look regardless

Hi mate,

Yes, its fairly recent and as you say it was 2 years ago!!. Its nothing major, but noticable. As you say though, could be plugs.
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S
Reply With Quote
  #22  
Old 09-05-2011, 10:05 PM
Hongkongfooi's Avatar
Hongkongfooi Hongkongfooi is offline
Platinum Member
 
Join Date: Dec 2008
Location: East Sussex
Posts: 5,783
Default

Quote:
Originally Posted by Lucky View Post
Hi mate,

Yes, its fairly recent and as you say it was 2 years ago!!. Its nothing major, but noticable. As you say though, could be plugs.

maybe we could get Simon down to us on the same day to share his travel costs!
Reply With Quote
  #23  
Old 09-05-2011, 10:09 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Let me know when!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #24  
Old 09-05-2011, 10:26 PM
Lucky's Avatar
Lucky Lucky is offline
'2 Spanners Qualified Technician' - If your job requires more then 1 spanner I'm your man !!!!!
 
Join Date: Sep 2008
Location: Telscombe Cliffs
Posts: 5,057
Default

Quote:
Originally Posted by Hongkongfooi View Post
maybe we could get Simon down to us on the same day to share his travel costs!

I'm up for that.
__________________
10 Years of Scoobies:04 WRX SL, 06 HAWK STI, 97 JDM WRX STI WAGON, 05 WRX STI, MK3 FOCUS RS, now Porsche Cayman S
Reply With Quote
  #25  
Old 09-05-2011, 11:10 PM
Jolly Green Monster Jolly Green Monster is offline
Rest in peace Simon.
 
Join Date: Sep 2008
Location: Maidstone
Posts: 1,104
Default

Quote:
Originally Posted by Lucky View Post
Hi mate,

Yes, its fairly recent and as you say it was 2 years ago!!. Its nothing major, but noticable. As you say though, could be plugs.
with the higher boost the plugs need changing (or cleaning at least) more often hopefully all it is..

Also check the clips on the coil pack plugs as they work lose.

Simon
__________________
Jolly Green Monster Limited
Full time mapper and Ecu Expert - EcuTek 99 to 2010, ESL 93 to 96, Apexi, Motec, Autronic, Link, GEMs, Simtek, Solaris/Syvecs remaps

www.JollyGreenMonster.co.uk

Please follow of Facebook http://www.facebook.com/pages/Jolly-...26125404073166
Reply With Quote
  #26  
Old 09-05-2011, 11:11 PM
Jolly Green Monster Jolly Green Monster is offline
Rest in peace Simon.
 
Join Date: Sep 2008
Location: Maidstone
Posts: 1,104
Default

Quote:
Originally Posted by Hongkongfooi View Post
maybe we could get Simon down to us on the same day to share his travel costs!
could be arranged
__________________
Jolly Green Monster Limited
Full time mapper and Ecu Expert - EcuTek 99 to 2010, ESL 93 to 96, Apexi, Motec, Autronic, Link, GEMs, Simtek, Solaris/Syvecs remaps

www.JollyGreenMonster.co.uk

Please follow of Facebook http://www.facebook.com/pages/Jolly-...26125404073166
Reply With Quote
  #27  
Old 17-05-2011, 09:37 AM
RobEvo5's Avatar
RobEvo5 RobEvo5 is offline
It Tick's All His Boxes.....or Scratches Another Itch.
 
Join Date: Sep 2008
Location: St Leonards On Sea
Posts: 1,943
Default

Nice job Scott - If you ever need to borrow it, I think I still have an original newgage cat virtually new that looks like your hawk one.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools



All times are GMT +1. The time now is 05:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.