|
|
#1
23-03-2012, 06:00 AM
|
||||
|
||||
Odd clutch issue
I have a JDM 6 speed box fitted to my 2002WRX - Master Cylinder is std for the car, slave cylinder is the 6speed version that came with the box. I have an AP clutch (organic) and std flywheel, both 6 speed versions.
The issue I have is occasionally when accelerating hard and going up the gears fast the clutch has no pressure, e.g. I shift up to third then when I go to shift to 4th (very soon after on the JDM ratios) it's like the clutch hasn't come back up, the pedal just goes to the floor with no pressure. The pressure then comes back a second or so later. Any ideas?
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter 
|
|
#2
23-03-2012, 08:35 AM
|
|||
|
|||
|
do you still have the pressure modulator valve fitted?? sounds most likely to be air or old fluid??
__________________
 ASPerformance 0191-4103770 PELTOR, PFC BRAKES, PAGID MOTUL, FERODO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA, TEIN, WHITELINE, SUPER-PRO, MILLERS OILS online shop!!
|
|
#3
23-03-2012, 05:33 PM
|
||||
|
||||
|
New fluid when the box was swapped, where would I find the pressure modulator valve.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
