South East Scoobies  

Go Back   South East Scoobies > The Showroom > Projects

Projects Tell us about your cars mods, past, present and future!

Reply
 
Thread Tools
  #51  
Old 08-02-2018, 08:59 PM
georgehawkins27's Avatar
georgehawkins27 georgehawkins27 is offline
Bronze Member
 
Join Date: Oct 2017
Location: Cambridge
Posts: 172
Default

Quote:
Originally Posted by IBenjieI View Post
Thanks Rob. The parts are bought now, luckily Baron found a breaker on eBay for me. He had a whole Silver Wagon for spares. I just hope they arrive soon as I hate the waiting game! Just want it back on the road asap.
Fingers crossed for you man!

Sent from my E5823 using Tapatalk
Reply With Quote
  #52  
Old 08-02-2018, 10:50 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by georgehawkins27 View Post
Fingers crossed for you man!

Sent from my E5823 using Tapatalk
Thanks George! Hopefully she comes back better than ever out of this...
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #53  
Old 09-02-2018, 06:16 PM
boggissimo's Avatar
boggissimo boggissimo is offline
Bronze Member
 
Join Date: Aug 2015
Location: Kent
Posts: 330
Default

Hard luck, glad you have found bits already. I keep missing out on bits in the correct colour for my wagon (not a Hawk, so we're not competing at least!)
__________________
JDM twinscroll Legacy wagon [previously blob WRX/PPP wagon, killed @ Silverstone Feb 2019]
Reply With Quote
  #54  
Old 10-02-2018, 10:43 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by boggissimo View Post
Hard luck, glad you have found bits already. I keep missing out on bits in the correct colour for my wagon (not a Hawk, so we're not competing at least!)
They're very hard to come by!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #55  
Old 14-02-2018, 12:53 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Little bit of an update on the repair, the body panels arrived yesterday.




They're not quite the right colour, I think they're more grey than silver. However the body shop that is going to repair the bonnet will pick them up tomorrow and prep them for a spray.

Also a bit of a Brucey bonus... the new front bumper came with Zunsport grilles on the top and bottom! Winner.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #56  
Old 14-02-2018, 01:01 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Result indeed
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #57  
Old 14-02-2018, 01:03 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Rdlangy1 View Post
Result indeed
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #58  
Old 14-02-2018, 02:57 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

Result but the DC2 tho????
Reply With Quote
  #59  
Old 14-02-2018, 11:00 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by scooby doo View Post
Result but the DC2 tho????
She has to go I'm afraid Don't really have the time or space to do anything with her so I'm trying to get the motivation together to get her sold.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #60  
Old 15-02-2018, 10:58 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

So today saw the replacement panels being taken to the bodyshop for a prep and spray up, the car will go sometime next week.

New number plates arrived today... with a little bling

__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #61  
Old 15-02-2018, 11:11 PM
Steve_PPP's Avatar
Steve_PPP Steve_PPP is offline
Admin, Meets/Events Organiser
 
Join Date: Sep 2008
Location: Burgess Hill, Sussex
Posts: 13,277
Default

Reply With Quote
  #62  
Old 15-02-2018, 11:14 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Steve_PPP View Post
Figured they're more permanent than a sticker
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #63  
Old 16-02-2018, 07:00 AM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Nice touch
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #64  
Old 16-02-2018, 09:33 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Rdlangy1 View Post
Nice touch
Haha cheers Ryan. It's just one of those silly little touches!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #65  
Old 17-02-2018, 02:45 PM
seventune seventune is offline
Bronze Member
 
Join Date: Oct 2014
Location: Claygate
Posts: 150
Default

Shame about the damage on the car.... good to see you got good replacements; should be good as new when you get the bumpers back
Reply With Quote
  #66  
Old 17-02-2018, 03:43 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by seventune View Post
Shame about the damage on the car.... good to see you got good replacements; should be good as new when you get the bumpers back
Cannot wait! I miss driving something faster than a 1.0!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #67  
Old 05-04-2018, 06:29 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Good evening folks! Finally after months of waiting, the Scoob lives and drives once again! Picked her up this evening, cost a pretty penny but Barry has done an incredible job getting her back to standard. Even threw in some new parking sensors for free because he took longer than he'd hoped! I'll let the pictures do the talking...








The bumpers, wing and headlight were second hand but the bonnet is original, Barry managed to do a fantastic job getting the crease out of the bonnet and removing so many dents from previous push-closes. Refer to the crash pics on page 1 for a comparison! I really didn't think it would ever look this good again but here we are! The Zunsport grille really makes the front end, just need a splitter now to finish her off nicely! One happy boy.

I think next on the cards is having the tailgate resprayed and debadged, will completely change the look of the rear end.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.

Last edited by IBenjieI; 05-04-2018 at 06:41 PM.
Reply With Quote
  #68  
Old 05-04-2018, 06:38 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Quote:
Originally Posted by IBenjieI View Post
Good evening folks! Finally after months of waiting, the Scoob lives and drives once again! Picked her up this evening, cost a pretty penny but Barry has done an incredible job getting her back to standard. Even threw in some new parking sensors for free because he took longer than he'd hoped! I'll let the pictures do the talking...








The bumpers, wing and headlight were second hand but the bonnet is original. Refer to the crash pics on page 1 for a comparison! I really didn't think it would ever look this good again but here we are! The Zunsport grille really makes the front end. Just need a splitter now! One happy boy.


Great job done there
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #69  
Old 05-04-2018, 06:54 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Rdlangy1 View Post
Great job done there
Cheers Ryan, feels so gooooood to be driving her again. Lessons learnt, don't drive in the cold and icy! Looks so much better than before, can't wait to get out to a meet again.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #70  
Old 05-04-2018, 08:14 PM
NL03Scooby's Avatar
NL03Scooby NL03Scooby is offline
Moderator
 
Join Date: Jul 2014
Location: Heathfield
Posts: 1,773
Default

So glad you are back up and running after what must have been a pretty pants few months. Car is looking right back up to scratch.
Reply With Quote
  #71  
Old 05-04-2018, 09:05 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by NL03Scooby View Post
So glad you are back up and running after what must have been a pretty pants few months. Car is looking right back up to scratch.
It's so good having four cylinders and 262 BHP! I love driving my missus car but it's a 1.0 and 3cyl haha. So happy with the work that has been done, a little more than I expected but worth it.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #72  
Old 16-01-2019, 12:06 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Update time!

It's been a very crap 2018 for me going through a divorce, working non stop etc so now I'm free of the wife's tyranny it's time to spend some money on the Scoob!

Myself and SamSTI on this forum have known each other since school and he offered to sell me an Afterburner De-cat downpipe and middle pipe for a bargain!




As you can see, they are IMMACULATE. The downpipe was only fitted to Sam's car for a few hundred miles and he took it off because it was too loud for a track day.

On top of that I bought myself a Walbro 255lph fuel pump from Scoobyworld.



The car is booked into SMD in Newhaven on the 5th February to have the above fitted, also fitting some Tein lowering springs whilst she's there.

On the 7th the car is booked in with Duncan Graham and Surrey Rolling Road for a remap, I'm so excited!

__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.

Last edited by IBenjieI; 16-01-2019 at 01:11 PM.
Reply With Quote
  #73  
Old 16-01-2019, 12:09 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Glad things are improving for you mate and can’t wait to see the finished result
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #74  
Old 16-01-2019, 12:18 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Rdlangy1 View Post
Glad things are improving for you mate and can’t wait to see the finished result
Morning Ryan! Thanks mate, I'm like a kid in a sweet shop at the moment, not sure on the exact figures of torque but my car is currently running at 261.7BHP so hopefully these new mods will free up some more power.

As for the lowering springs, I saw a really nice Black Blob WRX in Halfrauds the other day sitting on a set and it looked sexy as fook. That swayed me.

Now all I need is a lovely brand new set of 17's and she's looking good. Not sure whether I want Rota or Prodrive...
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #75  
Old 16-01-2019, 05:22 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

I only went into Halfords for some wheel cleaner!



Spot the difference...




Much better
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.

Last edited by IBenjieI; 16-01-2019 at 05:27 PM.
Reply With Quote
  #76  
Old 16-01-2019, 05:29 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Also, forgot about the interior bits I bought a few weeks back to tidy up the center console...



WRX gearknob from Scoobyworld and an unbranded leather gaiter from our good old friendly marketplace, eBay.
I have some 4D carbon effect vinyl wrap ready to cover the silver bits and pieces, that will be sorted out when time allows.

__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #77  
Old 16-01-2019, 05:31 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Snazzy
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #78  
Old 16-01-2019, 05:40 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by rdlangy1 View Post
snazzy
😊
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #79  
Old 16-01-2019, 11:42 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Ok, so I had a little time this evening once the little boy went to sleep so I decided to try my hand at vinyl wrapping the centre console fascias. This is the first time I've ever tried anything like this, took me about an hour altogether.

I took the gearknob surround plastic out of the car very easily, it literally just pops out. Popped out the clips holding the gaiter leather in place and it was free to come out the car...



I bought some 4D carbon effect wrap a little while ago on eBay, kept putting this off but I watched a few videos on YouTube on how to do this... it's actually quite simple. I cut the wrap to size probably a good few inches larger than I actually needed to give me some wiggle room.




I started off by removing the protective film on the front of the wrap, removed the backing paper and carefully followed the main contour of the plastic. Once it was in place I started gently heating it with a heat gun, on a low setting so I didn't overheat/damage the wrap or plastic. It only needed about a second or so and you can start to see it taking shape, using the squeegee supplied I dragged the bubbles out whilst it was still warm.




Continued heating it for a second, stretching it around the plastic and squeegeeing the bubbles out. Once the wrap cools, it semi hardens and feels like it's almost vacuum formed.

Once enough was around the edges and smoothed out as much as I could I trimmed it, I figured once the plastic was back in place it would hold the wrap in position on the underneaths so I wasn't really too fussed about it. I cut a big 'X' into the void spaces for the gearknob and the ashtray and did the same as before.

Using a sharp stanley knife I 'traced' the outline of the plastic to trim off the excess wrap. Put the ashtray back in and admired my handiwork!







The only thing that is bothering me is one corner I never managed to get the bubbles out no matter how many times I heated and squeegee'd. It's not massively noticeable but I know it's there so it bugs me.



And back in the car...




Mush better now! I'll finish the other ones tomorrow...

I didn't fancy trying to wrap the ashtray cover as it has too many moving parts so I may just spray it Gloss Black so it doesn't stand out too much.

Thanks for looking!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #80  
Old 16-01-2019, 11:49 PM
Rdlangy1's Avatar
Rdlangy1 Rdlangy1 is offline
Moderator
 
Join Date: Mar 2014
Location: Isle of Sheppey - Kent
Posts: 4,924
Default

Very tidy job mate I like that!
__________________
Subaru Impreza WRX STi Prodrive Type UK 2002:
"Tinkered With!"

Maintained and Modified by Super Jules
&
RM Performance http://www.rmperformance.co.uk
Reply With Quote
  #81  
Old 16-01-2019, 11:51 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Rdlangy1 View Post
Very tidy job mate I like that!
Haha, cheers Ryan. The old silver plastics are looking very tired so it was either spray them or wrap them. Naturally I chose the harder option lol.

I'll do the others tomorrow, too tired now. I just can't believe how much better it looks!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #82  
Old 17-01-2019, 07:23 AM
NL03Scooby's Avatar
NL03Scooby NL03Scooby is offline
Moderator
 
Join Date: Jul 2014
Location: Heathfield
Posts: 1,773
Default

Nice job!

Looks like things are really starting to move along again with the Wagon. The Carbon wrap looks smart but you should try a brave pill and try wrapping the tray lid too, I think it will top it off nicely.
Reply With Quote
  #83  
Old 17-01-2019, 08:51 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by NL03Scooby View Post
Nice job!

Looks like things are really starting to move along again with the Wagon. The Carbon wrap looks smart but you should try a brave pill and try wrapping the tray lid too, I think it will top it off nicely.
Thanks Rob 👍 I think you’re right, I was too tired last night to carry on but I might try it later when I do the other bits. It won’t be hard to do as it’s a straight forward shape.
Will look awesome when it’s all done.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #84  
Old 17-01-2019, 09:50 AM
Frenchie's Avatar
Frenchie Frenchie is offline
Gold Member
 
Join Date: May 2009
Location: Bretteville(Normandie)
Posts: 1,896
Default

Great job. Always admire people who attempt these really tricky jobs. Wish I had the confidence and patience. Well done.
Reply With Quote
  #85  
Old 17-01-2019, 10:26 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Frenchie View Post
Great job. Always admire people who attempt these really tricky jobs. Wish I had the confidence and patience. Well done.
It's one of those DIY jobs that I've always been afraid to try. But, if you mess it up you can heat the wrap up and remove it so can always start again. I watched a few videos so decided to take the plunge. Paid off!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #86  
Old 17-01-2019, 11:02 AM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

Coming along nicely , are they the pro sport gauges?
Reply With Quote
  #87  
Old 17-01-2019, 12:30 PM
Bolesroor's Avatar
Bolesroor Bolesroor is offline
Platinum Member
 
Join Date: May 2010
Location: Kent
Posts: 3,170
Default

Quote:
Originally Posted by Frenchie View Post
Great job. Always admire people who attempt these really tricky jobs. Wish I had the confidence and patience. Well done.
Agreed with Monsieur Frenchie looks great and you should try and cover the lid as Rob suggested.
__________________
Type 25 + 96 jdm sti wagon sti 05 ppp - gone but not forgotten
Reply With Quote
  #88  
Old 17-01-2019, 02:09 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by scooby doo View Post
Coming along nicely , are they the pro sport gauges?
They are indeed! 52mm.

Quote:
Originally Posted by Bolesroor View Post
Agreed with Monsieur Frenchie looks great and you should try and cover the lid as Rob suggested.
Well, today I finished the others off. However, it was very tricky to get into all the recesses in the stereo fascia.






I really don't like the outcome, there's too many imperfections. Around the opening for the double DIN was terrible to do, it's got so many different 'levels' to it and there wasn't enough vinyl no matter which way I cut the opening.

To me it seems too... 'chavvy' now. Like it belongs in a citroen saxo with Ripspeed alloys!

I'm contemplating removing it all and just settling with Gloss Black spray paint for the whole lot, at least there won't be any imperfections. At least not this noticeable.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #89  
Old 17-01-2019, 02:26 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

I did the same on my Bugeye - Using a Heat gun rather than hair dryer helped but burnt my fingers!

Eventually in summer mine kept coming away at the top of the stereo surround so in the end I went with satin black with a satin lacquer over the top - I know others have used Plastidip which would be my preference but I had the black and lacquer lying about.
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #90  
Old 17-01-2019, 02:54 PM
NL03Scooby's Avatar
NL03Scooby NL03Scooby is offline
Moderator
 
Join Date: Jul 2014
Location: Heathfield
Posts: 1,773
Default

Not sure how much hydro dipping is these days, seems to be a popular choice on many materials and surfaces on cars.

It’s a shame the final outcome wasn’t as you had hoped for but you gave it a good go and some of the first parts you did looked the business.
Reply With Quote
  #91  
Old 17-01-2019, 03:40 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by NL03Scooby View Post
Not sure how much hydro dipping is these days, seems to be a popular choice on many materials and surfaces on cars.

It’s a shame the final outcome wasn’t as you had hoped for but you gave it a good go and some of the first parts you did looked the business.
Yeah that’s what I thought. It’s starting to peel with the heat from my blower so I think I’ll go Satin or Matt black.

Shame but hey! I’ll look into hydrodipping but in the mean time I’ll spray it.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #92  
Old 17-01-2019, 03:41 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by SpecB View Post
I did the same on my Bugeye - Using a Heat gun rather than hair dryer helped but burnt my fingers!

Eventually in summer mine kept coming away at the top of the stereo surround so in the end I went with satin black with a satin lacquer over the top - I know others have used Plastidip which would be my preference but I had the black and lacquer lying about.
This. Heading to B&Q now
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #93  
Old 17-01-2019, 07:42 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Quote:
Originally Posted by IBenjieI View Post
This. Heading to B&Q now
If I'm not too late make sure to use a satin lacquer if you want it to not pick up shiny patches from sticky fingers when I just used stain black it marked terribly!
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #94  
Old 17-01-2019, 08:20 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by SpecB View Post
If I'm not too late make sure to use a satin lacquer if you want it to not pick up shiny patches from sticky fingers when I just used stain black it marked terribly!
Oh dear! I shall see how it turns out. Thanks mate.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #95  
Old 17-01-2019, 10:36 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Just don't let any kids in the car - especially with fresh cooked fairground doughnuts (Yes that is personal experience!).
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #96  
Old 18-01-2019, 09:19 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by SpecB View Post
Just don't let any kids in the car - especially with fresh cooked fairground doughnuts (Yes that is personal experience!).
I try not to give my little boy something that has that much sugar! He’s madder than a box of frogs as it is!
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #97  
Old 18-01-2019, 03:40 PM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

So bit of a rubbish update, I gave up painting my fascias as I'm not very good at spraying from a can

The gloss black I used was a rather thick paint, it ran and made a horrible mess of my plastics. I didn't have a proper primer so used some Citadel acrylic based brown that I had laying around. So, I've rubbed them back and they're now with my sprayer... Not sure what it will cost but he will still need to rub them down and he's going to put a high gloss black on them for me.

Will be worth the money in the end!



Proper Rally style now! Haha
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
  #98  
Old 18-01-2019, 04:47 PM
scooby doo's Avatar
scooby doo scooby doo is offline
Platinum Member
 
Join Date: Jul 2010
Location: hastings
Posts: 2,906
Default

Best thing to do.
Reply With Quote
  #99  
Old 19-01-2019, 07:37 AM
Banstead Stig's Avatar
Banstead Stig Banstead Stig is offline
Gold Member
 
Join Date: Feb 2012
Location: Banstead
Posts: 2,258
Default

Good on you for giving it a go.

It's a shame the carbon wrap didn't work out as the early efforts were great. Far better than I'd be able to do, that's for sure!

Personally, I think the carbon fibre looks a bit fussy when on small areas and surrounds like that, so for me it'll look better painted anyway.
Reply With Quote
  #100  
Old 19-01-2019, 08:32 AM
IBenjieI's Avatar
IBenjieI IBenjieI is offline
Bronze Member
 
Join Date: Jan 2018
Location: Seaford, East Sussex
Posts: 197
Default

Quote:
Originally Posted by Banstead Stig View Post
Good on you for giving it a go.

It's a shame the carbon wrap didn't work out as the early efforts were great. Far better than I'd be able to do, that's for sure!

Personally, I think the carbon fibre looks a bit fussy when on small areas and surrounds like that, so for me it'll look better painted anyway.
Haha cheers Stig. It looked awesome on the surround for the gear stick but was so tricky to do on the stereo surround. At least I can say I attempted it! Happy that I’m getting it done professionally though, I like to do things right with this car.
__________________
2006 WRX Wagon

Build Thread

Modified and Serviced by Brent @ Southern Motor Developments in Newhaven, East Sussex.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 12:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.