South East Scoobies  

Go Back   South East Scoobies > The Garage > General Mechanics

Reply
 
Thread Tools
  #1  
Old 21-10-2010, 01:05 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default gauges

i have had some gauges fitted in my car but the oil temp never goes above 110F(even after a long hard drive) and the oil pressure sits at about 25psi (may go up slightly when driving)do these figures sound about right????.As far as i know they are all wired in correctly .any help would be a great
Reply With Quote
  #2  
Old 21-10-2010, 01:13 PM
Spooky Spooky is offline
Bronze Member
 
Join Date: Jan 2010
Location: Surrey
Posts: 358
Default

You're gauges should start at about 50 degrees C? (120F) is the needle moving?

to reach 110 degrees C after a spirited run sounds right, and would normally reside around 95 degrees C is normal driving.

Only showing 1.7bar oil pressure is low but passable on idle, but you should be hitting around 6bar (87psi) under load.
__________________
Reply With Quote
  #3  
Old 21-10-2010, 01:25 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

the needles move when its starts up but stays at 110 fahrenheit but like i said oil pressure stays at around 25psi. any ideas on how to check it
Reply With Quote
  #4  
Old 21-10-2010, 06:34 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

anyone on here know of someone in the eastbourne area who could quickly check it ?I need to find out if its something broke or wired up wrong
Reply With Quote
  #5  
Old 21-10-2010, 06:45 PM
SpecB's Avatar
SpecB SpecB is offline
Moderator (formerly known as Bluebugeye!)
 
Join Date: Mar 2009
Location: Littlehampton
Posts: 4,345
Default

Try Tone aka Jaffasport
__________________
2005 Spec B 6MT - KiDO tuned (~270Bhp)
Custom exhaust - Cosworth filter - Samco Intake - Tints - Bilstein B8/B6 & STI springs - SuperPro ALK - Whiteline positive shift kit, rack mounts, rear adjustable camber bushes, front ARB mounts & strut brace, 20mm rear ARB with AVO mounts, - Hardrace Gearbox and pitch mounts - Prodrive PFF7's - Front Brembos - Kenwood CarPlay - 1/2 carbon grille - STI front splitter
Reply With Quote
  #6  
Old 21-10-2010, 07:09 PM
scooby999's Avatar
scooby999 scooby999 is offline
Silver Member
 
Join Date: Feb 2010
Location: darkside of the moon
Posts: 886
Default

Quote:
Originally Posted by BlueBugEye View Post
Try Tone aka Jaffasport
yeah would do but could do with someone in eastbourne to give it the once over .might just be easier to get some new gauges
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT +1. The time now is 06:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

Opinions expressed are not necessarily the opinions of SouthEastScoobies or any individuals directly or indirectly involved in this website. No responsibility is taken or assumed for any comments or statements made on this or any associated website. Visitors who use this website and rely on, or act on any information do so at their own judgement, discretion and or risk. SouthEastScoobies or its content providers shall not be liable for any loss or damage arising from or otherwise in connection with your use of SouthEastScoobies forums. It is not possible for the Administrators of these forums, or the Moderators participating, to fully and effectively monitor Messages that are submitted for infringement of third party rights. If you believe that any information within the forums infringes your legal rights, or gives cause for concern you should notify an Administrator or a Moderator immediately giving such information to enable the recipient to amend, delete or remove in its entirety the message, at their earliest convenience.