Goodwood - June 4th Jubilee Holiday (Show & Track Action) - Page 3

SpecB · #**101** 02-06-2012, 06:47 AM

Convoy meet points?

Granby · #**102** 02-06-2012, 09:04 AM

Quote:

Originally Posted by Granby

Could i come along and join you lot on the stand, pretty please

, i'll put a STi badge on the car lol

????????????????????

#**103** 02-06-2012, 09:04 AM

Going to be raining all fookin day by looks of forecast

#**104** 02-06-2012, 09:06 AM

Granby of course you can join us . Bring an umbrella pal

Granby · #**105** 02-06-2012, 09:07 AM

Quote:

Originally Posted by Crowman

Going to be raining all fookin day by looks of forecast

Well it is bank holiday, just as well we went to the ring last week as rain forecast there

Granby · #**106** 02-06-2012, 09:09 AM

Quote:

Originally Posted by Crowman

Granby of course you can join us . Bring an umbrella pal

Cheers, gonna have to keep a eye on the weather though

Steve_PPP · #**107** 02-06-2012, 10:52 AM

Quote:

Originally Posted by SilverSurfer

I have had quite a bit of communication with the organisers and I think I have negotiated that our stand will be in the paddock so cars can be nearby or move freely between the stand and the track/paddock.

At least this means that theres plenty of nearby shelter if we need to hide from the showers

Looking forward to this, better get out and clean the car, its not turned a wheel since it was parked up after Tuesday's journey home from Germany.

#**108** 02-06-2012, 12:32 PM

Can't make this now . Engine coming out of scoob

Granby · #**109** 02-06-2012, 01:00 PM

Quote:

Originally Posted by Crowman

Can't make this now . Engine coming out of scoob

Whats happened?

#**110** 02-06-2012, 01:19 PM

Changed plugs and near side front was seized in , a complete fooker to get out . Can only assume it has been butchered in before.
Thread in head is fooked .
Engine out, head off, might as well do both head gaskets .

Extremely pissed off

Skullfudge · #**111** 02-06-2012, 01:29 PM

Quote:

Originally Posted by Crowman

Changed plugs and near side front was seized in , a complete fooker to get out . Can only assume it has been butchered in before.
Thread in head is fooked .
Engine out, head off, might as well do both head gaskets .

Extremely pissed off

Previous heat issue ???

Skullfudge · #**112** 02-06-2012, 01:30 PM

What's happening about convoying to the event fella's ??

I will be picking The Crowman up.

#**113** 02-06-2012, 01:46 PM

Quote:

Originally Posted by Skullfudge

Previous heat issue ???

Have a feeling this is going to turn into an expensive project, replacement head,
Head gaskets, arp head bolt kit , inlet spacer mod, cosworth cam belt , silicon turbo inlet pipe and that's just the beginning

Not wanting to rebuild, just get running again.

#**114** 02-06-2012, 01:47 PM

Quote:

Originally Posted by Skullfudge

What's happening about convoying to the event fella's ??

I will be picking The Crowman up.

Top man mate .
Promise I won't have breakfast

Skullfudge · #**115** 02-06-2012, 01:50 PM

Quote:

Originally Posted by Crowman

Top man mate .
Promise I won't have breakfast

that was my main concern !

Skullfudge · #**116** 02-06-2012, 01:51 PM

Martyn hold fire buying a Cozzy belt. A mate of mine has just done a deal and will be getting original Cozzy belts for around £60.00.

Steve_PPP · #**117** 02-06-2012, 01:52 PM

gutted, thats a ****ter mate

convoy wise, i expect we'll do the usual A27 route as per our Goodwood brekkie club meets - meet at Patcham BP (A23/A27 interchange) then on from there. Can pick up those on route as normal. If stand needs to be in place and safety briefing starts at 8:30am, i'd guess we'd want to be there for 8?

So 7:00am meet at Patcham BP, to leave at 7:10? That sound about right Scott?

Hongkongfooi · #**118** 02-06-2012, 02:09 PM

Quote:

Originally Posted by Crowman

Have a feeling this is going to turn into an expensive project, replacement head,
Head gaskets, arp head bolt kit , inlet spacer mod, cosworth cam belt , silicon turbo inlet pipe and that's just the beginning

Not wanting to rebuild, just get running again.

I'll bring my silicone inlet with me see if it suits?

Hongkongfooi · #**119** 02-06-2012, 02:11 PM

Quote:

Originally Posted by Steve_PPP

gutted, thats a ****ter mate

convoy wise, i expect we'll do the usual A27 route as per our Goodwood brekkie club meets - meet at Patcham BP (A23/A27 interchange) then on from there. Can pick up those on route as normal. If stand needs to be in place and safety briefing starts at 8:30am, i'd guess we'd want to be there for 8?

So 7:00am meet at Patcham BP, to leave at 7:10? That sound about right Scott?

Sounds good Steve, coffee before the briefing.

Remember those on track , long sleeve tops and a helmet I remember being a requirement!

Granby · #**120** 02-06-2012, 02:19 PM

Quote:

Originally Posted by Crowman

Changed plugs and near side front was seized in , a complete fooker to get out . Can only assume it has been butchered in before.
Thread in head is fooked .
Engine out, head off, might as well do both head gaskets .

Extremely pissed off

ffs i'm gutted for you mate

But you and fudge in the same car, well we should be able to smell you both from miles lol

#**121** 02-06-2012, 02:21 PM

Quote:

Originally Posted by Hongkongfooi

I'll bring my silicone inlet with me see if it suits?

Ok Tim, not sure if it's the same .will take a look. Thanks

#**122** 02-06-2012, 02:22 PM

Quote:

Originally Posted by Granby

ffs i'm gutted for you mate

But you and fudge in the same car, well we should be able to smell you both from miles lol

Lol, true mate, the fudge was stealing my glory at times

#**123** 02-06-2012, 02:38 PM

Quote:

Originally Posted by Skullfudge

Martyn hold fire buying a Cozzy belt. A mate of mine has just done a deal and will be getting original Cozzy belts for around £60.00.

Ok mate, will hold off . Cheers

Anger · #**124** 02-06-2012, 04:10 PM

Do we need passes, as Scott said he needed reg plates to get in ?

Ginola · #**125** 02-06-2012, 04:20 PM

Quote:

Originally Posted by Anger

Do we need passes, as Scott said he needed reg plates to get in ?

Belive scott said that he was going to print some new bits out for us to display,

My cars rear diff is really playing up now so I very much doubt I will take part in the track proceedings.

(will tag on to the back of convoy at my usual spot steve)

Dave.

Steve_PPP · #**126** 02-06-2012, 04:44 PM

Has anyone got one of these we can use on the day?
http://www.machinemart.co.uk/shop/pr...haust%20hanger

Those rubber exhaust hangers can be stubborn little feckers.

Quote:

Originally Posted by Ginola

(will tag on to the back of convoy at my usual spot steve)

No problem mate. I expect we'll be coming past about 7:20-7:25ish.

Ginola · #**127** 02-06-2012, 04:56 PM

Quote:

Originally Posted by Steve_PPP

Has anyone got one of these we can use on the day?
http://www.machinemart.co.uk/shop/pr...haust%20hanger

Those rubber exhaust hangers can be stubborn little feckers.

No problem mate. I expect we'll be coming past about 7:20-7:25ish.

Happy to help others with there backboxes, can do this by hand there is a knack to it (+ brute force ofc) a screwdriver will surfice if there really stuborn but have not had to do that in 4 exhaust swaps

.

The better half is bringing picnic food (enough to feed all of west sussex most likely!) Is anyone else doing something similar (She asked)

RobEvo5 · #**128** 02-06-2012, 05:45 PM

Quote:

Originally Posted by Crowman

Changed plugs and near side front was seized in , a complete fooker to get out . Can only assume it has been butchered in before.
Thread in head is fooked .
Engine out, head off, might as well do both head gaskets .

Extremely pissed off

Ouch - Now that is something that was really hack me off as well. Not the sort of thing to expect or budget for. Hope end result isn't too painfull..

SpecB · #**129** 02-06-2012, 05:52 PM

I'll be in the usual layby from about 740 then!

SpecB · #**130** 02-06-2012, 06:10 PM

If possible I'd like to switch to an am session (crow man?) to give us flexibility on leaving time as we'll have Ben with us.

Scooby_Greg · #**131** 02-06-2012, 06:25 PM

Quote:

Originally Posted by Steve_PPP

gutted, thats a ****ter mate

convoy wise, i expect we'll do the usual A27 route as per our Goodwood brekkie club meets - meet at Patcham BP (A23/A27 interchange) then on from there. Can pick up those on route as normal. If stand needs to be in place and safety briefing starts at 8:30am, i'd guess we'd want to be there for 8?

So 7:00am meet at Patcham BP, to leave at 7:10? That sound about right Scott?

Thanks Steve - See you there. Was also going to go to the breakfast club tomorrow, but after seeing the forecast I may give it a miss...

Time to break it to the family what time they'll need to be up on Monday!

Steve_PPP · #**132** 02-06-2012, 06:34 PM

Quote:

Originally Posted by Scooby_Greg

Thanks Steve - See you there. Was also going to go to the breakfast club tomorrow, but after seeing the forecast I may give it a miss...

British cars isn't it tomorrow? Could have taken Claire's MG ZR but i'd certainly feel rather inadequate parked up next to your Aston mate

lupuss · #**133** 02-06-2012, 06:40 PM

Quote:

Originally Posted by BlueBugEye

I'll be in the usual layby from about 740 then!

Same here, by usual layby I assume you mean the one on the a27 where we met for the breakfast club.....

J

Skullfudge · #**134** 02-06-2012, 06:50 PM

Quote:

Originally Posted by Granby

ffs i'm gutted for you mate

But you and fudge in the same car, well we should be able to smell you both from miles lol

I don't believe this !!!!!!

I'm not sure if being put in the same bracket as The Crowman in relation to anal windage is an honour or an issue that causes huge concern to myself ?

Scott.T · #**135** 02-06-2012, 09:48 PM

Will be leaving hastings at 0620 so should be with u steve for 7.

Although they asked for reg numbers we should all display passes, so as long as you have a pass getting in shouldn't be a problem.

Am session cars will go direct to paddock, pm and stand cars go on stand near old control tower. This is road side of the track so do not go through the tunnel under track.

I will post passes up as soon as I am off phone and on lappy.

P.s we still need money from some.

Jason73 · #**136** 03-06-2012, 08:00 AM

****!!!!my printer has packed up. Can someone print me off a pass please. Also do we need to provide own helmets?

Granby · #**137** 03-06-2012, 09:23 AM

Quote:

Originally Posted by jason73

****!!!!my printer has packed up. Can someone print me off a pass please. Also do we need to provide own helmets?

There isn't a pass to print off at the moment lol

Jason73 · #**138** 03-06-2012, 02:47 PM

Any news on pass. Also are people taking food?

BIG"E" · #**139** 03-06-2012, 04:45 PM

Quote:

Originally Posted by jason73

Any news on pass. Also are people taking food?

Its is entirely up to you what food you take.

I would imagine that you need to have a helmet.

I am taking mine

If you need to borrow one let me know.

#**140** 03-06-2012, 04:53 PM

Quote:

Originally Posted by RobEvo5

Ouch - Now that is something that was really hack me off as well. Not the sort of thing to expect or budget for. Hope end result isn't too painfull..

Thanks Rob

Skullfudge · #**141** 03-06-2012, 04:54 PM

What's going on with these entry tickets gent's? ...... only I'm leaving for the event in 12 hours time

Jason73 · #**142** 03-06-2012, 05:06 PM

Quote:

Originally Posted by BIG"E"

Its is entirely up to you what food you take.

I would imagine that you need to have a helmet.

I am taking mine

If you need to borrow one let me know.

Yes I do need to

I have a large head though

Granby · #**143** 03-06-2012, 05:09 PM

Quote:

Originally Posted by jason73

Yes I do need to

I have a large head though

You haven't seen the size of Big E's head

Hongkongfooi · #**144** 03-06-2012, 05:18 PM

Quote:

Originally Posted by SilverSurfer

The following pass needs printing and displaying upon entry to help the organisers.
It is not clear whether we all need this or just the Track cars.
I suspect that as the SES stand is to be close to the Track paddock that we may all need one, but I will confirm.

Track goers need to be on site for an 0830 safety briefing.
If you are in the afternoon session there is an additional briefing at 1330.
Cars on stand need to be onsite by TBC.

/Edited by Steve - think this is the wrong pass so don't print it

Isn't this the pass?

Steve_PPP · #**145** 03-06-2012, 05:27 PM

Tim - hang fire for a moment before printing that. Just had a chat with Scott on the phone and he'll be posting up all the info shortly

simba · #**146** 03-06-2012, 05:31 PM

i got seats and picnic table that free for anyone to use am bringing food and all important above all else COFFEE !! still no pass for the statics yet or as tim put is it the other pass ? oh and few tools if needed to change back boxes on peeps cars

Steve_PPP · #**147** 03-06-2012, 05:36 PM

Quote:

Originally Posted by simba

i got seats and picnic table that free for anyone to use am bringing food and all important above all else COFFEE !! still no pass for the statics yet or as tim put is it the other pass ? oh and few tools if needed to change back boxes on peeps cars

I am bringing some tools for backbox swapping, plus I will also have a set of metal car ramps so we can easily get underneath cars.

The correct passes will be posted up by Scott shortly!

simba · #**148** 03-06-2012, 05:38 PM

Quote:

Originally Posted by Steve_PPP

I am bringing some tools for backbox swapping, plus I will also have a set of metal car ramps so we can easily get underneath cars.

The correct passes will be posted up by Scott shortly!

good call mate re ramps

Scooby_Greg · #**149** 03-06-2012, 05:58 PM

Quote:

Originally Posted by jason73

Yes I do need to

I have a large head though

Jason, you can hire helmets for £10 if you need

simba · #**150** 03-06-2012, 06:06 PM

Quote:

Originally Posted by Scooby_Greg

Jason, you can hire helmets for £10 if you need

I will bring my lid if anyone wants to use

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)